Question about 1998 Chevrolet Malibu
Remove all screws(phillips) remove the power window/locks switches carefully, all along the door panel edges there are clips that hold the panel onto the inside door skin these must be carefully pried as to not break them, they are plastic... have a screw # 2 phillips driver, flat bladed also to pry panel etc. and a pair of needle nose pliers to remove any clips that stay stuck in the door skin once the panel is removed. Look over the panel carefully and be sure you remove anything that ressembles a plastic caq/cover to ensure safe removal. Go slow do it right the first time!!! Good luck. John
Posted on May 06, 2010
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
A) Remove the screws in the following locations:
When I examined the problem that I had with my Odyssey, I found the following:
Posted on Nov 27, 2008
On vehicles without power windows, place a soft cloth under the window regulator handle and pull upwards on the cloth to release the snapring. Remove the regulator handle and plate.
Fig. 2: Using a taped prytool, carefully remove the bezel portion of the handle
Fig. 3: Remove the bezel by pulling towards the tip of the handle
Fig. 4: Remove any screw covers . . .
Posted on Mar 31, 2009
SOURCE: driver side window off track
2 sets (total 4) T30 Torx screws need to be removed.
The 2 holding the interior door handle grip / cup.
And then behind where the cup is, there are 2 more, that secure the door panel to the door.
FWIW, there are also 2 philips screws. One at the top, near the mirror. The second at the moveable door handle latch.
Lastly, of course, the standard "pop" sort of fasteners, around the perimeter on the 2 sides and bottom of the door panel. Also, there are 2 light blue plastic alignment posts (that do *not* fasten).
When re-assembling, make *sure* to properly catch / engage the door panel's top black plastic lip into the 3 hidden metal "U" holders, at the very top of the door panel.
Posted on Jul 26, 2009
SOURCE: REMOVING A DOOR PANEL
You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door
Posted on Aug 14, 2009
Tips for a great answer:
Sep 14, 2014 | 2003 Nissan Altima
Dec 15, 2013 | 2003 Chevrolet Malibu
Jun 07, 2012 | 2006 Dodge Stratus
Jan 25, 2010 | 2002 Chrysler Concorde
Dec 10, 2009 | 1996 Honda Accord
Oct 08, 2009 | 1998 Chrysler Concorde
Sep 29, 2009 | 2006 Mazda MPV
Mar 23, 2009 | 1997 Chrysler Sebring
Mar 12, 2009 | 1993 Honda Accord
Feb 16, 2009 | 1991 Chevrolet S-10
279 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: