Question about 1991 Ford Festiva

1 Answer

Have a problem with the fuel injection, put a noid light on it but it will not light the noid light, plus it's not firing.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 19 Answers

Sounds like your not getting an injector pulse from Computer. Could be Crank Sensor.

Posted on May 06, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

,1996 chevy sierra truck does not get fuel to


It does not have a carburetor, its fuel injected. Chk, fuel pump pressure, fuel pump status, fuel filter, and make sure its not out of fuel. if all is ok, injectors for correct function.... noid lights or stethoscope. check cylinder balance for ignition.

Sep 11, 2014 | 1996 GMC Sierra

1 Answer

What is a noid light


A Noid light is a diagnostic tool that
is used to identify injector pulse in a fuel injected vehicle where injector performance is in question. Hope this helps. God Bless

Jun 26, 2014 | 1998 Dodge Neon

1 Answer

Signs of bad fuel injecter


Have you put a NOIDS light on the Injector?

If you are experiencing a performance issue, then try using SEA FOAM in your FUEL TANK and allow the system to get clean...

What makes you think you have signs of Bad Fuel injectors ?

Apr 09, 2013 | Cars & Trucks

2 Answers

I have a 89 rs camaro with the 5.0l can anybody offer suggestions on what the possible fuel system issues are with year and model? I've changed the fuel and air filters rebuilt tbi ran fuel system cl


check fuel pressure TBI injection fuel pressure should be 9 - 13 psi.make sure fuel pressure above 10 psi because throttle body need at least 10 psi. in order to work right.if all is good check see if PCM firing the fuel injectors.go to auto parts store buy noid light.to use noid light you have to disconnect fuel injector electrical connector then plug noid light into fuel injector connector.crank engine watch noid light should blink meaning PCM is firing fuel injectors if noid light steady not blinking PCM not working.if noid light dont light up you have open circuit in the fuel injectors wiring.if check engine light flashing have vechicle code scan.bad tps sensor will also cause problem you are having.

Apr 03, 2013 | Cars & Trucks

2 Answers

P0 308


when the engine is cool spray carb cleaner around the intake manifold

Oct 10, 2012 | 2000 Ford F250 Super Duty Crew Cabs

2 Answers

My 2000 Dodge Neon had the Check Engine light go on last night. And it was still on this morning. When I started driving it, it would shake when I came to a stop. I also noticed that the longer I drove it...


CODE PO202 FUEL INJECTOR 2 CONTROL CIRCUIT MALFUNCTION CONDITIONS.POSSIBLE CAUSES INJECTOR 2 CONTROL CIRCUIT IS OPEN OR GROUNDED BETWEEN THE INJECTOR AND THE PCM.OR INJECTOR 2 HAS FAILED ALSO PCM HAVE FAILED.ONLY WAY TO TELL IF PCM FIRING INJECTOR 2 IS DISCONNECT 2 INJECTOR ELECTRICAL CONNECTOR HOOK NOID LIGHT TO INJECTOR 2 CONNECTOR CRANK ENGINE.THE NOID LIGHT SHOULD BE BLINKING.IF NOID LIGHT STEADY YOU HAVE FAULTY PCM.IF NOID LIGHT NOT WORKING YOU HAVE BAD GROUND OR OPEN WIRE ON INJECTOR 2 ELECTRICAL CONNECTOR.

Feb 11, 2011 | 2000 Dodge Neon

1 Answer

No injector pulse, no current to the injector


Check the pickup in the distributor as this is the cam sensor. The injectors run of the pulses created while the rotor is turning around. It should be a plastic disk located under the rotor button.

Mar 13, 2009 | 1990 Jeep Wrangler

1 Answer

Repair


you need to hook up a fuel pressure tester and see if you have the proper fuel pressure if it is a throttle body needs 9-13lbs of pressure if it is fuel injected it should have between 35-44 lbs
if it has that you need to check injector pulse with a noid light let me know how you make out

Oct 13, 2008 | 1999 Chevrolet Suburban

Not finding what you are looking for?
1991 Ford Festiva Logo

Related Topics:

200 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...