Question about 1993 Nissan Sentra 4 Door

2 Answers

The lower door hinge on the driver's side of my 1994 nissan sentra(2 door) has a bushing that's toast. it's completely deteriorated and is causing the door to close improperly. does anyone know how to replace the bushing. i was told to get a replaceement kit. is there a repair kit available? any advice would be very helpful. thanks.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

Just add flat washers to the bottom hinge (between door and hinge). These hinge pins are not replaceable and they sell you the whole hinge.

Posted on Apr 26, 2012

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,309 Answers

Kits are available, go to popular mechanics auto section, the have a complete installation guide with pics

Posted on May 06, 2010

  • Sergio Avila Apr 26, 2012

    There is no kits for this model. You have to replace the whole hinge.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2006 nissan armada- how to replace driver side hinge pin and bushing


Call RockAuto (or go online to RockAuto.com)

2006 NISSAN ARMADA 5.6L V8 : Body : Door Hinge Pin & Bushing Kit $12.58

Nov 10, 2014 | 2006 Nissan Armada

1 Answer

Location of fuel pump relay on a 1994 nissan sentra


On the 94 sentra the fuel pump relay is located under the hood, driver's side to the left of the battery, third slot from the front of the car, should be green in color.

Jun 18, 2014 | 1994 Nissan Sentra 4-Door

1 Answer

What to do when the steering wheel pulls to the left while driving


Three common faults here are;
1) Steering alignment - if the front tyres are wearing on the insides then the wheels are facing toe-out. If on the outsides then they're toe-in. The only way to really get them aligned properly is by laser light at a garage. Cause can be altered ride height, mounting a kerb badly, wear in suspension.
2) Worn part in the suspension system, most likely a suspension arm bush or ball joint has deteriorated, uneven and/or premature tyre wear suggests this is more likely the cause.
3) Uneven tyre pressures or sizes. If a tyre is down on pressure or one wheel is oddly sized then you can get a diagonal pivot effect accross the car's chassis, causing it to pull to one side.This effect can also happen due to a broken suspension coil/leaf spring for the same reason.

Apr 04, 2012 | 1991 Nissan Sentra 2 Door

1 Answer

Replacing a starter on a 1994 nissan sentra 1.6 .


please remove the battery terminal for safety purpose,remove the female terminal of the starter,remove the number !2mm bolt on the starter then remove the two bolt upper portion lower portion number 14mm bolt then pullout the starter from the transmission housing

Apr 02, 2011 | 1994 Nissan Sentra 4-Door

4 Answers

Driver side door loose


WEll, usually not a bushing, but there is often lots of wear at the pivot pin. Usually best to replace entire hinge, as teh tolerance goes off when the pin wears...

Aug 01, 2010 | 1991 Nissan Sentra 2 Door

1 Answer

Driver side door does not close correctly are their bushing that might need replaced


Quite often you can open the door and loosen off the bottom hinge bolts where they attach to the door and insert chassis alignment shims between the door and the hinge plate. This will have the effect of raising the raising the back of the door up a little. You'll have to have someone lift the door while you insert the shims after you have loosened the bolts. Any shop that does wheel alignments should be willing to give you a couple small chassis shims.

Aug 01, 2010 | 2002 Nissan Sentra

1 Answer

2004 nissan sentra the driver side door lock


most likly need a door lock actuator for drivers door

Mar 20, 2010 | 2004 Nissan Sentra

Not finding what you are looking for?
1993 Nissan Sentra 4 Door Logo

394 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

713 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...