Question about 1992 Honda Accord

2 Answers

Alarm brake light inside dash board is on for 1 day then it turn off by itself, please tell me what is the problem? Thanks

Posted by on


2 Answers

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 20 Answers

In first you should inspect your brake line from the back of the car to the front. your car is getting hold so you can have a leake somewhere in the brake lines, then check for your brake fluid level in the master?does it have a dark color if it does you need to change all the brake fluid i'ts contaminated.but if it's cleen and the level is full,this could be your brake pad as to be you feel the brake pedal free when you press on it and after a second time feel harder? if it does you need to bleed the brakes lines,if it's the same change the master.BUT! i remember once i had to change the brake lines spliter it's locate under the master cylinder, bolt on the side of the rail frame this spliter send a signal to your light indicator in your dashboard when the pressure goes down,so i hope this can help you! ...give me some news please! lipak!...

Posted on May 06, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Honda Master
  • 1,779 Answers

The brake warning light in the 92 Accord will go on for 2 possible reasons:
1. Brake fluid is low-check the master brake cylinder to make sure the level is ok.
2. If you engage the emergency brake (even slightly) the light will go on. I think that this may be the reason in your situation. It may be that the emergency brake was pulled up a bit, not enough to engage the brakes, but enough for the light to go on. If you later engaged the brake further, and then released it, the light would go off.

Posted on May 06, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Why is 97 rodeo battery and brake light turned on and a/c blower want turn on

is engine running?
if yes>?
got ABS?
1: charge system failure.
2: brake failed or fluid low, or other brake failure. (up to 4 on light)
3: the blower in the dash is dead? in all modes, heat and A/C?
do tell.?
does the blower work in High.
did all this happen in 1 day, or a year, or just bought this sick car/?

check fuses yet?
blower fuse.

Jul 01, 2014 | 1997 Isuzu Rodeo

1 Answer

97 Nissan Pathfinder dash lights aren't working AND the alarm to turn off the headlights isn't working either.

i know this sounds crazy, but do you have break/tail lights?some cars shut off dash lites when tail/brake lights dont work

Jan 11, 2013 | 1997 Nissan Pathfinder

1 Answer

03 eclipse spyder auto v6 .Ive cussed out my wife, broke my favorite flashlight and have wasted 3 days and a hundred bucks. So if anyone can help please do. It will not start. No crank no start. Put the...

Put the battery cables back on shut the doors and lock the drivers door with the key then unlock it with the key. This will shut the alarm off it it goes off and may get the car out of the lockdown mode it seems that it is currently in. If that does not work you may try and call your local Mitsubishi dealer and ask one of the guys in the service or parts dept if the car has a lock down mode and what procedure has to be done to unlock it, mor than likley the will tell you and you wont have to spend a dime. This is all regarding the factory alarm however.

Jan 05, 2013 | Cars & Trucks

1 Answer

I have head and brake light but no tail and dash board light

I have a 1993 grand marquis n all my lights come except the taillights no blown bulbs check all d fuses no bad ones can I just get a good answer to my problem

Jul 23, 2012 | 1993 Mercury Grand Marquis

1 Answer

I have a 1999 Ford Expedition. I am not sure if the car alarm I have is stock or after market. I can tell you when the car is alarmed, a small red light by the steering column will blink. Here's my...

Its Aftermarket. See if you can find the "unit", under the dash, for a manufacturers name, then google it for the nearest dealer, and tell them what the problems is.

Dec 17, 2010 | 1999 Ford Expedition

1 Answer

Brake light on dash board turns on/blinks, hand brake is down and brake fluid is gauged

Did you check the brake fluid n sensor inside. Could be the pump itself fail.

Oct 31, 2010 | 2003 Toyota Camry

1 Answer

Dash lights show car with back lights on what does this mean

Hello. Welcome to FixYa. Please allow me to assist you.

That icon is telling you that one of your taillamp or your brake light bulbs is burnt out. All you need to do is turn on the parking lights, and check to see if they all work. Then, have someone press the brakes whilst you observe the operation of the brake lights; also note to see if the brake light in the back window is working. Once you replace the burnt out bulb, the icon will reset itself, and will stay out.

Thanks for choosing FixYa for assistance today. If my advice helps you out, a 4-thumb rating would be greatly appreciated.

Oct 09, 2010 | 2001 Toyota Avalon

1 Answer


I know this may be a silly Question, so forgive me ...
Did you check the fuses? One fuse controls every thing you listed as being out.
You may also have to make sure your alarm is not interfearing with your diagnosing.
And yes these trucks do have light switch problems. I have often taken the cover off the back of the switch and cleaned the contacts with some fine sand paper.
It works about 4 out of 5 times.
Please let me know if this helps

Oct 25, 2009 | 1993 Nissan Pathfinder

4 Answers

1990 Mazda Miata, Tail lights, Interior lights not working! :\

I have a problem with my tail lights in my mazda. Brake lights working great but the light that supposed to be working during night time are not. By the way the front lights are working too! Also the light of the panel inside is not working. Can anyone please tell me how to fix it?
Thanks alot in advance!

Sep 06, 2008 | 1990 Mazda MX-5

Not finding what you are looking for?
1992 Honda Accord Logo

131 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts


Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides