Question about 1997 Toyota Camry

1 Answer

1997 Camry: How do i replace the side mirror on a 92 camry...

How do i replace the side mirror on a 92 camry

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 630 Answers

They are usually held in by two #10 metric nuts located under the black plastic shield on the inside of the door... I am not sure if the door panel must come off to get the plastic plate off the backside of the mirror or if the plastic shield(plate,cover,etc.) can be lifted off with a pry motion from a screw driver) hope this helps.

Posted on May 06, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

While trying to change my pads i noticed my rotors seem loose, also i cant get the brakes to stop grinding, squealing after reassembly.


Shane, rotors may seem loose until wheel is on car and torqued to specification, I recommend you take car in for your brakes to be inspected, estimate and repaired at a good shop. Arrange your appointment time so you can be there and watch how it is done and learn from it. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
How to Replace the Brakes on 1997 Toyota Camry
How to Replace Front Brakes Toyota Camry
How to Install Replace Front Disc Brake Pads Rotors Toyota Camry 92 96...
Replace Camry Rear Brake Shoes



Jun 12, 2016 | 1997 Toyota Camry

1 Answer

Need to replace both lateral links on 96 toyota camry


See here for details, p89

http://www.turboninjas.com/camry/sa.pdf



Sometimes parts can be rusted in place, needing violence on your part


http://www.toyotanation.com/forum/103-3rd-4th-generation-1992-1996-1997-2001/375660-rear-wheel-wobble-how-diagnosis-replace-bad-lateral-control-arm.html#post3510098



If you decide to work on the front side lateral arms (still rear of car), that's when it gets REALLY hard


http://www.toyotanation.com/forum/103-3rd-4th-generation-1992-1996-1997-2001/372696-92-camry-help-advice-replacing-rear-lateral-control-arm-front-arm.html

Nov 28, 2012 | Toyota Camry Cars & Trucks

1 Answer

Toyota camry 97 smoke charger does not work and also


make sure the mirror switch is set ti rt or lt. if so and niether mirror works you probably need a new switch.
not sure exactly what a smoke charger is but i'll asume you mean the cig lighter. you may have some debris in the lighter reciever or a blown fuse or both.

Aug 30, 2009 | 1997 Toyota Camry

1 Answer

Broken vacuum valve


It'll start without this switch, but it'll probably run roughly. I'd replace it.

May 05, 2009 | 1997 Toyota Camry

2 Answers

Broken driver side view mirror-2005 camry


Heated mirrors usually have a symbol on them -- a small diagram showing squigley heat lines.

If you don't see this, it's probably not heated. But when you take the mirror off, if it's heated it'll have wires connected to the back.

Yes, you can replace a heated mirror with non-heated -- just leave the wires tucked out of the way when you install the new mirror.

Apr 29, 2009 | 2004 Toyota Camry

1 Answer

Window motor fuse location on 92 toyota camry le


look behind the money chance container l side lower dash

g gl

Apr 15, 2009 | 1993 Toyota Camry V6

1 Answer

INSTALL SIDE VIEW MIRROR ON A 1997 TOYOTA CAMRY


Yes, you have to remove the door panel.

Remove the 2 plastic protectors on the front edge, and remove the 2 brass colored screws. Next, remove the push pins from the latch side. Push in, and pull out the whole thing. Next, under the armrest, remove the screw. Lift up the power windoe control, being careful to not break the plastic retainer tab. Remove the screw under the window control. Starting at the bottom, pull out the panel, and, when all of the clips are loose, pull the panel straight up. It is best to do this with the door panel as warm as possible, like in a heated garage. Doing this outside in the cold will break all of the plastic retainer clips; they are quite brittle whn cold.

I hope this helps

Thanks for choosing FIxYa for assistance. A FIxYa rating (4 blue diamonds) would be greatly appreciated.

Feb 23, 2009 | 2002 Toyota Camry

1 Answer

I need to replace the mirror glass on a 1994 camry driver side p


Start with a good thick pair of leather gloves, a putty knife, and a tall trash can. Place the trash can below the mirror, tilt the mirror inward so you get a hold of the outer edge, and carefully pry the remaining pieces of mirror from the backing plate. Do not apply any pressure directly to the backing plate, or you may damage the gears on the electric motor. You should be able to pick up a new mirror and adhesive at your local auto parts store. Use masking tape and a couple of wood blocks to hold the glass in place while the adhesive sets (blocks against the glass, then wrap the whole thing in tape).

Feb 21, 2009 | 2003 Toyota Camry

2 Answers

Replace 97 Camry passenger side mirror


If you pull off the triangular black plastic trim behind the mirror, you will see the mirror wiring. If there is no plug, you will have to pull off the door panle. .....SOME Japanese cars have the plugs, but not all of them...Americian built cars do not. They are different.

Feb 09, 2009 | 1997 Toyota Camry

1 Answer

Need to replace driver side mirror for Camry 2002, Power mirror


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door

Dec 05, 2008 | 2002 Toyota Camry

Not finding what you are looking for?
1997 Toyota Camry Logo

198 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8589 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...