Question about 2002 Nissan Xterra

Open Question

Nissan xterra factory alarm goes off when ever it want too and power lock lock itself when ever can i disarm the alarm and lock myself

Posted by on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 412 Answers

SOURCE: 2005 Chrysler Grand Voyager. Central locking

the body control module may need a software update..check with your local dealer

Posted on Jun 12, 2009

  • 7 Answers

SOURCE: 1995 Nissan Maxima alarm system

Hey, I bought my 1995 Nissan Maxima GLE brand new back in July 1994 with factory installed alarm, it just doen't make any sound when you arm or disarm it with remote. The only way you can tell whether it is armed or disarmed is from the lever position of your doors and the blinking red light under the dash. Only the newer versions of Nissan/Infiniti's has the "Audio/Silent" mode button on the remote which allows you to activate/deactivate you car alarm with an audiable sound or no sound at all. No worry, there is nothing wrong with your remote or car alarm.

Posted on Jun 27, 2009

FixurNissan
  • 61 Answers

SOURCE: Same Problem - Xterra Panic Alarm Keeps Going Off

If you are close to the truck when it happens, try removing the battery from the remote. Some times when remotes are worn, they can send out a constant signal setting off the alarm, unlocking the doors and so on. I would try that first. If it stops, then you verified the remote is the problem

Thanks Jay!

Posted on Jul 21, 2009

alicantecoli
  • 22095 Answers

SOURCE: factory alarm disarm

dealer only ,its built into the ECU have you pushed the fuel cut off switch back down to reset it ?? under the bonnet with a red rubber top on it about an inch square

Posted on Jan 04, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I arm and disarm the alarm on my 94 gs 300


when you lock the doors it automatically arms itself. you can disarm by inserting the key in the driver's side door and unlock the door lock, it should disarm if the alarm goes off.

Mar 19, 2015 | 1994 Lexus GS 300

1 Answer

Flashing lights on security system for 1993 ford escort wagon


usualy there is a switch on the driver and passener side, try disarming by unlocking drivers door with the key to disarm the factory alarm, or the passenger door. this should turn off the alarm if it is not aftermarket. the factory alarm will arm any time the door is locked by key or power door lock. good luck

Jan 14, 2014 | 1993 Ford Escort 4 Door

1 Answer

How can permanently disable the anti-theft device in my 1996 Nissan quest? It goes off unexpectedly and then locks down the engine so it won't start. There is nothing worth stealing in this vehicle...


If you're ok about messing with the wiring on your vehicle, you can connect the factory disarm wire permanently to a body ground, to disable the factory security. The factory disarm wire is;

Factory Disarm Red/Black (-) Driver's Kick Panel

Sep 07, 2011 | 1996 Nissan Quest

2 Answers

How can i disarm the factory security alarm.i have tried the key locks. i have no remote with the car. i didnt know it had an alarm when i bought it . 1995 chrysler cirrus


Here is what I do on my 95 Cirrus I also do not have a keyless remote (well I do but is broke) and after frustation after frustation trying to disarm the factory alarm I find out that by unlocking the passenger front door with the ignition key from the outside will disarm it you may have to try few times before it's disarmed you need to make sure that the blinking red light stops blinking and all of the locks on all 4 door are up or unlocked, this is what I been doing for 3 years now and that's how I disarm the alarm on my car, I hope this helps.

May 15, 2010 | 1995 Chrysler Cirrus

1 Answer

Don't have remote to car, key is not disengaging alarm, car won't start


Pull the door panel and check to see if the alarm harness has come away from the lock. if so manipulate the harness manually to disarm the alarm. the car should start,

Apr 25, 2010 | 2000 Nissan Xterra

1 Answer

1995 Nissan Maxima alarm system


Hey, I bought my 1995 Nissan Maxima GLE brand new back in July 1994 with factory installed alarm, it just doen't make any sound when you arm or disarm it with remote. The only way you can tell whether it is armed or disarmed is from the lever position of your doors and the blinking red light under the dash. Only the newer versions of Nissan/Infiniti's has the "Audio/Silent" mode button on the remote which allows you to activate/deactivate you car alarm with an audiable sound or no sound at all. No worry, there is nothing wrong with your remote or car alarm.

Jun 17, 2009 | 1995 Nissan Maxima

1 Answer

How to set factory alarm without remote, togle switch enabled


factory alarms are passive, if it is working it sets itself when u exit the car. u don't need the remote for the alarm to work if it has a factory system. if u want to test if it is working lock the car with the power lock button and leave the window down, reach inside the car and open the door from the inside handle, the alarm will sound if it is working, to disarm just lock and unlock driver door with the key..

May 31, 2009 | 1993 Nissan Pathfinder

1 Answer

How Can I Disconnect The Factory Alarm


because who ever changed the locks didn't replace the alarm harness on the back of the lockcylinder

May 20, 2009 | 2003 Nissan Xterra

1 Answer

Lost door lock remote for 2001 Nissan Xterra.


You don't want to turn the security system completely off, besides there really is no need to. To arm and disarm the vehicle simply use the key in the drivers door. When you turn the key and lock the car the system will arm after about 30 seconds. When you come back to the car and unlock the car with the drivers door lock cylinder the system will unarm, just the same as if you were using the remote. If the system is unarmed and it still wont start you probably have a NATS issue with the key. This is different than simply disarming. You can't shut off or disarm the NATS system.

Nov 29, 2008 | 2001 Nissan Xterra

Not finding what you are looking for?
2002 Nissan Xterra Logo

Related Topics:

284 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...