Question about 2000 Hyundai Accent

1 Answer

Hi, i have a fault on breaking on my 2000 accent, as you apply brakes it will be fine but with a very light clicking noise, if you start to lift gently off the brakes the abs will start to kick in and make a a bigger noise! if you gently pump the brakes you can get this to happen too. disks and pads have been changed, fluid level is fine. is it the abs sensor that gone somewhere?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 46 Answers

Abs sensor usually will make the ABS light come on the dash. I would guess a speed sensor problem.

Posted on May 06, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 silverado feels like the brakes are stuck on and ABS light on


You may be right in that the brakes are applied.
The ABS would need to be checked for trouble codes to proceed.
You could also lift one wheel at a time to see if the brakes are on.

Feb 05, 2014 | Chevrolet Silverado Cars & Trucks

1 Answer

Hyundai Accent 2000, brake light


Could be the switch for the hand brake. You might try unplugging it to see if the light goes off.

Feb 23, 2013 | 2000 Hyundai Accent

1 Answer

2000 dodge intrepid clicking noise when apply brakes


It is probable that one or more sets of brake pads are worn down. The clicking noise is the wear indicators letting you know.

The knocking sound is possibly worn rear suspension bushes at some point, but I don't know your model well enough to say where.

Mar 16, 2012 | Cars & Trucks

1 Answer

How can i change the rear brake light of a hyundai accent model 2000


Hi, You will have to pop the trunk open and pull some of the carpeting away to acsess the light assembly. Then just turn the socket and the bulb should come out. Replace with same bulb size and watts. Good luck.

Feb 24, 2012 | Hyundai Accent Cars & Trucks

1 Answer

I test drove 2009 hyundai accent recently. car has 48000 miles already. Some squeaky noise is coming when you apply the break? I am thinking of buying this car. Is this a serious problem?


Hi, squeaky brakes can be as simple as dust from the brake pads ( this can be solved by washing the brakes with a hose pipe quite easy if it has alloy wheels.
If its a constant noise the brake pads could be due for changing which could be normal for that amount of miles( May also need discs ).
I would`nt let that stop you buying the car as they are a good car
I hope i have set your mind at rest
John ( South Wales UK )

May 20, 2011 | 2003 Hyundai Accent

2 Answers

I have a traction control fault message and a grinding noise when the brakes are applied; especially when turning left.


Check your brake pads as the grinding noise could be the metal wear flags making contact with the discs to inform you that they need replacing. The traction control fault light may be on due to low brake fluid or fault in braking system, don't wait check it out ! Hope this helps

Jun 04, 2010 | 2000 Jaguar S-Type

1 Answer

Knocking when brakes applied


REAR BRAKE NOISE - SHOE AND LINING KIT
A shoe and lining kit is available for installation if an Elantra (XD) or Accent (LC)
equipped with rear drum brakes exhibits a chattering noise from the rear brakes when
the brakes are applied.

APPLICABLE VEHICLES:
• Accent (LC) and Elantra (XD) equipped with rear drum brakes and in the following
Production Date and VIN Range:
SERVICE PROCEDURE:
For further information, refer to the applicable Shop Manual.
Model Production Date Range VIN Range
ACCENT (LC) May 21,1999 - Dec. 28, 2005 ALL WITH DRUM
BRAKES.
ELANTRA(XD) June 30, 2000 - May 23, 2006 JOB#1-
KMHDN46016V363974

ACCENT SHOE & LINING
KIT
ASSEMBLY
58305-25A00 58305-25F00 7"(00MY - 05MY)
58305-25A10 58305-25F10 8"(00MY - 05MY)

May 03, 2009 | 2003 Hyundai Accent

1 Answer

Noise while applying brakes or turn left / right


Sounds like the break rotors are warped. At this point its best to do a break job, chanses are the calipers are the problem not releasing and creating heat, or break lines are not returning fluid back to resavor witch in turn warp the rotors. Run the whole gamet on the breaks. New rotors, New calipers, New pads, and New rubber break lines to calipers. And you will solve your break problem.

Apr 04, 2009 | 2000 Ford Crown Victoria

2 Answers

Squeaky noise when applying breaks


semi-metallic pads can cause noise from glazing over if you are too rough on them, or a crappy pad composition. get some BG brand STOP SQUEAL and apply it to the pads. clears it right up

Mar 19, 2009 | 2001 Dodge Neon

Not finding what you are looking for?
2000 Hyundai Accent Logo

291 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...