Question about 1990 Chevrolet Camaro

1 Answer

Replacing a starter on a 91 Camaro... what wire goes where... could use a photo or pictures... thanks...

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 2,317 Answers

There will be the battery cable, 1 or 2 fusible link wires with the same size hole terminal as the battery cable, those go on the large terminal at 12 o'clock on the solenoid. The other wire, with a small terminal goes on the small terminal, at 3 o'clock on the solenoid, the terminal by the engine block.

Posted on May 06, 2010

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

Can not find my starter for a 1995 z-28 camaro v-8 need a picture of location

Follow the big red wire from the battery it will go right to it. Unhook battery before removing starter.

Oct 12, 2014 | 1995 Chevrolet Camaro

1 Answer

How can I jump the starter on my 91 camaro?

hot wire starter you can short out ignition switch and wiring. to jump starter ignition switch start have to run 10 gauge jumper wire from the starter solenoid positive battery terminal to starter switch or S terminal on starter solenoid this procedure take two people but better remove starter replace starter solenoid. trying jumping off starter on camaro would be dangerous you have jack up car to get to starter and wiring person laying under car hot wiring starter while other person hold ignition start position put person under car in deadly position just remove starter have auto parts check it out first replace starter or solenoid if either bad. easier hot wire starter if starter under hood like my 1977 vega monza had starter at top could take long screw driver jump starter off.on the four cylinders engines back in the 70s. camaro starter under car dangerous trying to hot wire not a good idea.

May 07, 2013 | Cars & Trucks

1 Answer

I have a 91 camaro 3.1 and I just changed the starter and recharged the battery but when I turn the key I won't even engage the starter or crank at all

Is ita used starter ,and some time the little wire breaks as the starter goes back in. check the wires on the starter

Oct 28, 2012 | Cars & Trucks

1 Answer

How do i replace a starter in a 91 Chevy Camaro RS

disconnect negative battery cable, raise the car and remove the two 15mm bolts holding the starter in, the remove the 8mm starter signal wire the remove the positive battery cable.. if exhaust is in the way you will have to just loosen the exhaust from the manifold and let it just hang.. hope this helps...

Jul 06, 2012 | Chevrolet Camaro Cars & Trucks

1 Answer

91 camaro wont start.......

sound like a bad starter solenoid located on the top of the starter.

Apr 30, 2012 | 1991 Chevrolet Camaro

1 Answer


Hi, if the extra wire goes to the alternator, then yes, it goes on the big post along with the battery wire. This is your charge wire. Please let me know if you have more questions, and thanks for using FixYa.


Jan 01, 2011 | 1990 GMC Sierra

3 Answers

My 91 camaro rs 5.0 wont start or click at all. i changed the starter and battery. what can it be?

check the key I have 1992 camaro rs I took it some where and parked it came out and went to start it and it didnt do anything key would turn over no sound no lights nothing. My key had that anti left chip pretty exspensive to replace key needs to entergrated into the comupter. Just a thought.

Oct 20, 2010 | 1991 Chevrolet Camaro

1 Answer

After starting my 91 camaro the starter enguage wheel won"t stay pulled back out of the way. How do I fix this?

Replace the starter you will or have damaged the starter drive and could ruin the teeth on the fly wheel. The spring has gone bad in the solinoid or the shaft thats is activated magnetically is dirty and sticking, ther could be a problem with the starter switch but that is less likely than the solinoid.

Oct 17, 2009 | 1991 Chevrolet Camaro

1 Answer

I have a 91 camaro 3.1 V6 has spark fuel and power to the injector but wont start just wondering what it could be

sometimes it is the ecm which is the computer that goes bad and can no longer sends signals to the starter to turn over. sometimes could be the firing order or timing. check these things out.

Jul 25, 2009 | 1991 Chevrolet Camaro

1 Answer

1995 camaro starter

Very easy. Get the car off the ground on the driver side and remove the 2 bolts and 2 wires to the starter and drop down. The exhaust may be or seem to be in the way but you can wiggle it through carefully. wiggle in the replacement and attach the wires carefully and bolt into place checking to make sure your wires are not kinked after you install the bolts. hope this helps

Jun 25, 2008 | 1995 Chevrolet Camaro

Not finding what you are looking for?
1990 Chevrolet Camaro Logo

Related Topics:

243 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides