Question about 2002 Isuzu Rodeo

1 Answer

Diagnostic code for isuzu rodeo p1125,p1295, and p1550

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 957 Answers

P1125 is: Throttle Positioning Sensor intermittent.
P1295 is: Multiple faults on bank 1 (right)
P1550 is: Power steering pressure sensor out of self test range.
Well the ECM recognizes 3 codes. Were these codes stored as inactive (in the history section)? Or are these codes all active? Code P1125 and P1295 may be related but P1550 is separate. How else may I help?

Posted on May 06, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2004 isuzu rodeo codes P1125, P1295 and P1515 what do they mean ?


no engine stated.
answering for usa rodeo. only. on a usa forum.
it means trouble; the factory manual covers this.
As does mitchells DIY online, read that much>?
those are called DTCs , scan codes. diagnostic trouble codes.
The PCM looks for problems all the time running,
CALLED MONITORS (a sort of nanny)
all cars do this 96 to now, in USA. by law.
If no book or no mitchells try google (or the like)
if you had you'd have seen isuzu examples.

but google finds this in 1 click.

the great justanswersl.com (ASE Techs)?
1125
1295
1515
DTC P1125: ELECTRIC THROTTLE CONTROL (ETC) LIMIT PERFORMANCE MODE.
2nd hit.,
P1125 Isuzu Electronic Throttle Control Limit Performance Mode P1221 Isuzu Throttle Position Sensor 1-2 Circuit Performance P1295 Isuzu Electronic Throttle Control Power Management Mode P1515 Isuzu TP Sensor To MAF Sensor Correlation


the first hit said, bad grounds top engine to PCM
and bad harness wires to above same place.
but as all techs, no, bad wires, happen all the time.
as do vast other reasons.
what I do , as the FSM states, clearly
is pick one failure and correct it, and sometimes gets them all.
like blown fuses do, on all vehicles.

1125 means limphome, is in force Low power too.
the TPS is acting up.
the 1515 means in English
that the Throttle angle and air flow dO NOT JIBE.
my jeep books calls that "incongruity": (nicer word)
or they differ. and should not.
i'd be checking the TPS voltages. for correct voltage.
this can fail for wires, rust, and bad sensors.
the word performance means it reads funny. (wrong)


we use a real scan tool and a real volt meter to see what the readings are on these parts.
why not get a real ASE tech to find it.
they know all that electronics magic,
ALL learn that there can be false codes.
one failure can trip many codes, but only one is the fundamental code.

or vacuum leaks cause many errors but not one
states vacuum leaks.
see?

Oct 01, 2016 | 2004 Isuzu Rodeo

1 Answer

WHAT IS P1125


  • Poor continuity through the TP sensor connectors.
  • Poor continuity through the TP harness.
  • Intermittent open or short inside the TP sensor


  • Read more: http://engine-codes.com/p1125.html#ixzz2OQ3xFgH1
    Follow us: EngineCodes on Facebook

    Mar 15, 2013 | 1996 Isuzu Rodeo

    1 Answer

    2000 izuzu rodeo reduced power light came on, it starts up but immediately dies. Read all the following codes p0502, p0401, p1125, p1295, p1515, p0137, p0106, p1299


    check all fuses to start with. then check all grounding points... for that many codes usually means a bad pcm or loose ground wire..

    Jul 08, 2012 | Cars & Trucks

    1 Answer

    Any ideas? Check Engine Light and Reduced Power Light for Isuzu Rodeo


    check your fuses first the first codes are vac. leak codes related to fuel at fuel tank

    Jul 06, 2012 | 2001 Isuzu Rodeo

    1 Answer

    I have 3 codes p1125, p1295, and p1515 and was wondering what they are


    p1125 tells you the vehicule has gone into (limp) mode or reduced power. p1295 will direct you to a problem with your Throtlle position sensor and p1515 fault indicates theres a problem with the corilation between throttle position and commande giving.

    i own a 2001 rodeo LS 3.2L and had this codes show up. The machine had really bad idling and when accelerating quick after first start would go into limp mode and not pick up speed pass 50 kms. i tryed changing the throttle position sensor.. nothing. tryed changing the spark plugs and noticed they looked unusually white (engine running lean) i put injector cleaner in with i freash tank of gas thinking the injectors were dirty and it seemed to help. Next a changed the fuel filter which completly solved my problem. at the last oil change they told me they changed it but didn't the inside of the filter was rusted and clogged starving the engine of fuel.

    Problem solve for 15 $ after you change your filter take it to and auto parts store with a computer to reset the engine lights

    Dec 11, 2010 | 2001 Isuzu Rodeo

    3 Answers

    2002 rodeo isuzu for car


    This vehicle has what is called fly by wire with an electronic throttle body. This vehicle particularly has had problems with poor grounds at the intake manifold and broken wires by the connector at the throttle body. The best solution would be to have an expert properly diagnose the problem with his special equipment.

    May 06, 2010 | 2002 Isuzu Rodeo

    2 Answers

    Can my transmisson on my 2002 isuzu rodeo be low on fluid.It does go into gear but .But it does not go very far.Like the transmisson is slipping


    I suggest bring the vehicle to a repair shop to :
    a) check for leaks and ATF condition ( burnt smell ,shavings, and coolant in ATF) Any one of these conditions may indicate a rebuild.
    b) if no leaks are found and ATF is in decent condition fill tranny to proper level and check for slipping.
    c) if slipping doesn't happen after level is brought up to specs, DO a transmission oil filter and ATF change.(and be thankful you gotta away cheap.
    d) if slipping still happens after level has been topped off
    they(repair shop) will either "Stall Test it or pressure check the transmission " Good luck

    Apr 24, 2010 | 2002 Isuzu Rodeo

    1 Answer

    NECESITO AYUDA..PROBLEMA EN ISUZU RODEO 2000.


    ami carro sele tiro un sello dela transmision y se tiro todo el aceite lo pare de manejar selo pusieron y ahora enlas suvidas pierde velosidad y prende la luz abs

    Feb 18, 2010 | 2003 Isuzu Rodeo

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    2,213 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Isuzu Experts

    yadayada
    yadayada

    Level 3 Expert

    76846 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22246 Answers

    Thomas Perkins
    Thomas Perkins

    Level 3 Expert

    14384 Answers

    Are you an Isuzu Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...