Question about 1991 Mercedes-Benz 560
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
hello, 560 sel,,,model 126.039 engine with v-8,engine number 117.968 ke is is fuel injection system.ref. book;technical data mb,ty
Posted on Apr 29, 2009
SOURCE: timing marks
this is an easy one to time. the timing mark for the crank is 0 degrees-do not attempt to tum crank if cam timing is out. there is no distributor on this engine-it is advanced with your intake camshaft. The intake camshaft is the only tricky part to time. Be very careful because at 2500 rpm this cam actually moves forward via cam advance solenoid. It will hit your crank if not timed properly! so with your crank at o degrees-camshafts out of head if you need to turn engine to line up crank-on the exhaust cam(your left)behind the gear(on flange) there will be a hole big enough to put a small punch in that will line up with the top of the deck surface on the outer side(to the left). Now on your intake cam(your right) it will be just the opposite. the hole on the back side of the gear flange will line up on the right with the to p the deck surface. once in line hold intake cam and turn the gear(advancer) all the way to the right)-very important. You will have to start with you intake(put chain on) then line up your exhaust and install timing chain tensioner. always turn engine 360 degrees and recheck before you proceed. At least your at top dead center and you can visually see the lobes on both cams mostly straight up. hope I have been helpful.
Posted on Jun 13, 2009
go to the info menu and navigate to the language options and select english, should be able to reset the oil life reset in the same menu.
Posted on Aug 28, 2009
ok..you must have more than one car???? you don't drive the 300 atall im guessing. #1 start car drive up the road and \back to your house. #2 let it idle till problem starts. #3 once it does start with the problem keep it alive with the gas pedal. #4 once your have it safely from dying in higher rpms "rev it" like a kid would, you know like if you were gonna race some one lol. be careful not to over rev or damage engine. you should do this for five minutes no longer than that. #5 let it idle for another 5 minutes. #6 repeat every day until problem with idling decipates. it took mine 3 300e like 3 days of this. if your not going to drive the car once you get the problem out of the way. turn the car on everyday and let it idle for 5 minutes atleast and take it for a short drive once a week. they get lonelly you know lol. later on you can just turn the car on every 2 -3 days and let it idle but still take it on a short drive atleast once a week
Posted on Feb 27, 2010
Could be breather tubes for emisions are dried and cracked,valve cover gaskets or a head gasket. The fix is to replace them.
Posted on May 07, 2010
Tips for a great answer:
Feb 19, 2011 | Mercedes-Benz SL-Class Cars & Trucks
Dec 13, 2010 | Mercedes-Benz SL-Class Cars & Trucks
May 07, 2010 | 1990 Mercedes-Benz Mercedes Benz Sl Class
Mar 08, 2010 | 1993 Mercedes-Benz Mercedes Benz Sl Class
Sep 15, 2009 | 1991 Mercedes-Benz Mercedes Benz Sl Class
Sep 07, 2009 | 1990 Mercedes-Benz Mercedes Benz Sl Class
Jul 13, 2009 | 1997 Mercedes-Benz Mercedes Benz Sl Class
Jun 08, 2009 | 1994 Mercedes-Benz Mercedes Benz Sl Class
May 02, 2009 | 1990 Mercedes-Benz Mercedes Benz Sl Class
Mar 14, 2009 | 1993 Mercedes-Benz E-Class
Jul 24, 2014 | 1991 Mercedes-Benz 560
61 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: