Question about 2000 Chevrolet S-10

1 Answer

Passenger power window problem

My passenger power window sometimes will roll down, but it acts like it doesn't have the power to go back up. Sometimes you have to pull it up.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,102 Answers

Hi, this is a common problem and it could be down to a couple of things.

the first and most likely is that all the runners the window runs on need re-greasing to do this you would need to get some spray grease or lube not wd40 that makes the problem worse, you then need to remove the door panel on that side and give all the moving parts a good spray and also the rail the window arms run on, spray it then work the window up and down a few times and hopefully that will solve your problem, if not keep reading.

now the second problem you could be having is going to be worn arms that the window runs on this is not very likely but does happen, once you have the panel off check everything is tight and tighten any loose parts up if after doing this and greasing you still have the problem then your going to need to buy a new window mechanism, these are not expensive to buy but can be a bit fiddly to fit as their isnt much room to get your hands in to get the work done.

let me know how you get on or if you need further assistance ok

Posted on May 05, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Passenger widows can only be rolled down or up from drivers side. Front passenger can sometimes roll down window but not back up


Bad switch on passenger side. Could also be switch on drivers door not letting power go to passenger door

Nov 30, 2014 | 2008 Ford F-150

1 Answer

How do I get the electric window on my 2000 Jeep Grand Cherokee to roll back up?


Jeeps are really bad for the window regulators going bad. That's your problem. No fix for them, just replace it.

Sep 04, 2014 | 2000 Jeep Grand Cherokee

1 Answer

1999 Dodge Grand Caravan Front Passenger works sometimes and Passenger Rear vent does not work


Try changing the door switch. It should be a relatively easy fix if that is the problem.

Dec 26, 2013 | 1999 Dodge Grand Caravan

2 Answers

2000 pontiac firebird windows sometimes wont go down or up and its not the window motors it has an alarm installed if u hit the dash sometimes it helps


With the security system I have been told you can get a sensor that you plug into your security system that came standard with the car. THis system is located under the plastic that covers your speakers on the passenger side in the back. If you unplug the sensor and then pick up a relay from radio shack it acts the same as reading your key that is in your car and will allow you to roll the windows up or down when the key is in the ignition

Mar 26, 2011 | 2000 Pontiac Firebird

1 Answer

I have a 2010 Toyota Camry with a front passenger window problem. The window goes up and comes right back down sometimes when I push the button to roll the window up. The window will finally stay up...


Hello Susan..... What you are experiencing is the jam protection function: During automatic
closing operation, the window stops and opens half way if something gets caught
between the window and window frame. If the window receives a strong impact,
this function may work even if nothing is caught.

If the power window does not operate automatically or the jam protection function does not operate correctly, you should normalize the power window
To normalize the power window:
1. Push down the power window switch and lower the windows fully.
2. Pull up the switch until the windows close and hold the switch for a second. Make sure that the window open and close automatically. If the power windows cannot be operated properly, have it
checked by your dealer.

Dec 03, 2010 | 1995 Toyota Camry

1 Answer

My 2000 Durango electrical/wiring problems...


The power lock problem is definately the electric lock actuator in the door. Replace it.
The power window problem could be the switch or the motor.
Put a test light on the motor connections. Operate the power window switch up and down. If the light works both directions, then replace the motor. If the light only lights one direction, then replace the switch... and you still might have to replace the motor afterward so do not think that replacing the switch is absolute. They sometimes fail together.

Mar 21, 2010 | 2000 Dodge Durango

1 Answer

1990 Passenger window keeps falling off tracks. Had new window replaced because it shattered, but still doesnt roll down right. What is wrong?


Your window has a lower glider that floats on a track, and sometimes when people replace the glass they fail to replace the stopper on the end, which acts as a brake. If you can see the track with the panel off, watch as you roll up the window and see if the rollers stay in the track. Also remember that the glass has a glider glued to its back side to keep the window level as you roll. The most common problem here is the glass slipping off track, and a new track inserted into your window frame will fix that (Dealer Item)

Mar 10, 2010 | Buick Regal Cars & Trucks

1 Answer

Passenger window rolls down window but does not roll up


replace the switch. They have parts made of plastic pressing on the contacts softing these babies up making them useless in a few years

Jan 20, 2010 | 2005 Ford Explorer

3 Answers

1999 Jeep Grand cherokee


Check the wiring between the drivers door and the A pillar(the body of the car). Sometimes the harness breaks from opening and closing the door.

Nov 07, 2008 | 1999 Jeep Grand Cherokee

Not finding what you are looking for?
2000 Chevrolet S-10 Logo

38 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...