Question about 1996 Land Rover Range Rover

1 Answer

I have a 1996 range rover, my driver side and steering wheels shakes bad when i go over 3o miles an hour, i think i need lower tie rod, i had the upper one changed last year

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 395 Answers

Sounds like a hub bearing is bad

Posted on May 05, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

The driver side tire on my Nissan Altima shakes badly I've changed the brakes but I'm wondering if I need to change the lower control arm


Can you grab the tire/wheel assembly and it has looseness while stationary or is it a shake that starts when speed increases?
If it starts to shake as speed increases,you may need a wheel balance.
If there is any looseness when you grab it while stationary,get a look under there SAFELY!! and replace any loose parts.

May 28, 2017 | Nissan Cars & Trucks

2 Answers

What else can make front end shimmy besides tie rods?


basically everything can didnt specify type of vehicle so well go thru list first tires out of balance or under inflated and or oversized for vehicle ---hub /wheel bearing going bad ---upper or lower ball joint bad or damaged ----upper or lower control arm bushings---shocks/struts bad ---tie rods not properly installed ---idler arm bad or damaged --steering box/steering rack bad or damaged

Jun 10, 2015 | Cars & Trucks

1 Answer

Lots of shaking from side to side.


Could be a bad tire ( or bent rim Have balance checked), ball joint, idler arm, wheel bearing, steering tie rod end or defective rack and pinion unit. Lift vehicle about 1 inch off ground ( do each side independently) Use a pry bar and pry from ground up and down on wheel. Much play? bad ball joint. With both hands, try to move wheel side to side. Much play? could be a tie rod end or bad wheel bearing. Visually check play of steering arm into rack and pinion unit, more than about a half inch play, bad rack and pinion unit. Try to move back and forth with hands top and bottom. Much play? Bad ball joint or wheel bearing, verify visually that it is ball joint moving, else it is the wheel bearing. Manually check for play in each joint in steering control rods from steering knuckle all the way through each rod where there is a joint. Replace the one you find excessive play in. Check mounting studs for sway bar for loose fit, deteriorated rubber bushings or a crack / break in the sway bar. Replace if needed. That's about all I can think of unless it only happens when applying brakes, in which case it could be a warped rotor.

Aug 21, 2014 | Cars & Trucks

1 Answer

Steering was loose while driving and turning, then suddenly would **** to the right


It sounds like you have at least one bad tie rod end....this is the most likely problem, but I have listed other things to check out.

To figure out which tie rod end(s) are bad, you need to jack the front end up and put it on jackstands, or if you have a buddy that works at a shop that can put it on a lift, that is even better.

With the front end jacked up and the steering unlocked, have somebody turn the wheel left and right and watch as the tie rods (the rods that actually "steer" the wheels) move - there should be no "play" or looseness in either the inner or outer tie rod ends.... the large turnbuckle looking ends on the rods. Most often, it is the outer tie rod ends that go bad, and if it is pulling right on you the one on the right side is most suspect. Also try and hold one wheel at a time still while your buddy steers and see if there is any slop.... there should be ZERO play or slop between the steering wheel and the front wheels.

Bad ball joints can also cause steering problems. With the front still jacked up, grab a wheel and try and shake it up and down, in and out. If you feel it move, replace both the upper and lower balljoints on that wheel (only one set may be bad, but if so, the other is certainly worn!).

Bad wheel bearings can also cause steering problems, and allot of shaking and vibration when you are driving. If you can shake your jacked up wheel any which way and it is loose, or if you spin the wheel and hear allot of crunching noises, you have bad wheel bearings.

All of these problems are serious, and if you have a sudden complete failure of the bad part while you are driving, you can lose control of your truck. You need to determine which of the above is causing your problem and take care of it immediately. The best answer is to go to a qualified mechanic, but if you are up to doing it yourself, be careful and don't try and do it all alone.

Mar 09, 2011 | 1991 Nissan Pickup

2 Answers

Where is the outer tie rod on left side located


It is connected to the left steering knuckle (behind the left front wheel). Very difficult to see without removing the wheel.

Mar 06, 2011 | Chevrolet Lumina Cars & Trucks

1 Answer

2002 ford escape tie rod squeaks


My outer tie rod did the same thing when just out of warranty. I could tell it was "bad" by putting my hand on the tie rod while someone else turned the steering a little and I could easily feel the vibration.
Check the other side to feel the difference. Tie rods don't cost that much, if you can replace it yourself, and take a chance on foregoing the wheel alignment. Maybe a $150? job at the shop.
In my case, a tie rod was not readily available. I verified that it was a good joint; no shake or rattle. Then I squirted a little WD40 inside the boot, and put it back together. 70,000 miles later, the new tie rod is still on my shelf waiting for the squeak to return.

Dec 30, 2009 | 2002 Ford Escape

1 Answer

Steering shacks replaced steering damper still shacks


shakes?or shacks?Let's just say that you mean shake.If your brake pedal pulsates,replace the rotors.If your steering wheel shakes(low speed)broken belt in front tire.Jack up one tire enough to clear the ground,spin it.Spins nice,lower and jack up the other.Spin that one,if the belt is broke it'll be very noticable.While up in the air check the lug nuts,if they're loose it can make the steering shake too.If the shake is at highway speed,bad shocks or tie rods or ball joints or a combination of these.Jack up a front tire and try to move it(Key turned off to lock steering).If it moves top to bottom,ball joint.Side to side,tie rod.Doesn't move,shocks.The worst could be a bad hub bearing,but you'd hear it and you said nothing about any noise.

Nov 05, 2009 | Harley Davidson XL 1200 C Sportster Custom...

2 Answers

Vehicle hakes when driving 45 to 50 miles per hour


Check wheel balance,
check steering linkages for loosness - such as tie rod ends, steering rack linkages etc,
check driveline for worn/loose joints and bearings.

Jul 07, 2009 | 1996 Jeep Grand Cherokee

1 Answer

1996 Toyota Tacoma, 2WD, front driver side suspension creak. Cannot hear with window closed, but happens when engine is not running (if vehicle is pushed or rolled on uneven pavment). Have not noticed any...


Could be your upper and lower ball joints. squeeze the boots and see if you can feel any grease inside. With 160k miles it may be time to change them. Sway bar links and tie rod ends also have rubber boots protecting their ball joints.

Apr 15, 2009 | 1996 Toyota Tacoma

Not finding what you are looking for?
1996 Land Rover Range Rover Logo

142 people viewed this question

Ask a Question

Usually answered in minutes!

Top Land Rover Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Land Rover Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...