Question about 1992 Chevrolet C/K 3500

1 Answer

Truck Will Not Start, it has a new battery no problems with the starter. I turned it off for five minutes and it will not start could it be a fuse ?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 8,619 Answers

Hi


Thanks for using FixYa. First of all you’ll need to check battery voltage. Inspect, clean and tight both ends of all battery cables. Also check, clean and tight wiring connections. Check for voltage at relay. If relay has voltage but there is no "click" when key is turned to start, replace relay. Remove starter and inspect drive gear and flywheel teeth. Check to see if voltage reaches to starter relay/solenoid when turn to start. Please also check the transmission sensor. Replace the parts which are defective. Please do accept the solution if the issue is resolved or else revert for further assistance.


Thanks
Rylee

Posted on May 05, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cold starting Ford F 150 below 30 F will click solonoid have to wait to start


Sounds like the solenoid for the starter has a burnt spot on it. I don't think leaving the key on is heating up the starter so I do not know what is happening there. Are you getting a lot of water up in the starter so it is freezing over night. I would test the solenoid or replace it.

Jun 13, 2017 | 2005 Ford F-150

1 Answer

Truck wont start


replace battery cables could have bad ground cable.if see dash lights on when turn ignition to on position.check starter fuse or relay or remove starter check for faulty starter solenoid or starter.if starter okay and fuse starter relay okay ignition fuse and switch okay see dash lights could have problem in the theft security system need have vechicle code scan see if theft security fault code show up.

Jan 28, 2013 | 1998 Chevrolet Chevrolet silverado

1 Answer

2005 GMC Yukon XL will not start. Took starter off and had it tested. The starter is good. However, the PCM fuse is blowing when attempting to start truck or turning turning the switch to start the tr


There is a dead short to ground on that circuit . There are videos on youtube showing how to find an fix a short . Do you know how to do automotive electrical testing ? How to find automotive electrical shorts Look at the wiring harness under the hood for rubbed through wire's , harness going to the PCM , also find out what if any thing else is powered by that fuse . Which PCM fuse ? There are a few PCM 1 , PCM B , etc...

PCM 1 Fuse
15A
Powertrain Control Module (PCM), Mass Air Flow (MAF) Sensor, Evaporative Emission (EVAP) Canister Purge Solenoid, Fuel Composition Sensor, Secondary Fuel Pump Relay

PCM B Fuse
20A
Powertrain Control Module (PCM)

Any one of these fuse will cause the engine not to crank . The PCM energizes the starter relay which supply's power to the starter .

Mar 11, 2017 | 2005 GMC Yukon XL

1 Answer

Problems starting turnig but not turning over


this may help diagnose your problem. with headlights on,try to start truck.do headlights dim? if so,check battery for bad.try boosting your truck from another car. check battery terminals for clean and tight. this is a must!!! if battery is good,,,,lights ,,headlights on and turning the keyswitch to start and no dim in the headlights when you turn the switch to start,bad connection to battery,or bad starter,or blown fuseable link in wiring to the starter,check for blown fuses to main,starter,e.c.m. under the hood in main fuse box. also check for a bad fuel pump relay in the main fuse box under the hood.

Sep 17, 2011 | 2001 Chevrolet S-10

2 Answers

2005 GMC Sierra 2500HD 6.0 Won't turn over


I have seen many ign switchs. Check to see if the theft doesn't flash when you try to start. It is still posable that the starter is going. Have someone crank the engine. Check for power on the purple wire. If there is power and the it does not crank. Check that the big wire has a soild 12 volts. You can use a screw driver and jump the purple and the big 12v battery at the starter and it should turn on if not replace the starter

Dec 02, 2009 | 2005 GMC Sierra 2500HD 4WD

2 Answers

1998 bmw 740il will not start


check battery cables.make sure they are not loose are or corroded.if battery cables okay.problem could be faulty starter - electronic immobilizer control - ignition switch + check its fuse first.if you disconnect battery cables besure to turn off radio so you wont lose code.

Nov 18, 2009 | BMW 750 Cars & Trucks

3 Answers

Truck will not start after replacing old fuel pump.


you may have water in the line.
purge it at pressure regulator on fuel rail

Jun 08, 2009 | 1998 Isuzu Hombre

1 Answer

Car starts then dies


Your antitheft system is shutting it down. You need to reprogram it. First hook up a battery charger. Then turn the key on. The security light should blink on and off. Leave the key on for 10 minutes. At the end of ten minutes, the security light will stop blinking. When it does turn the key off for five seconds. Then turn the key on. Repeat the 10minutes. Turn the key off then on. Repeat the 10 minutes a third time. At the end of the 3rd ten minute period , start the truck. It should be reprogrammed and continue to run.

Mar 10, 2009 | 2002 Chevrolet Silverado

2 Answers

1998 dodge ram 1500 starting problem


check the charge on the battery. then maybe your starter is out.

Jul 19, 2008 | 1998 Dodge Ram 1500 4WD

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...