Question about 2001 Kia Sportage

Open Question

It has a code p0108 map/baro sensor

I have a 2001 kia sportage an it has a code p0108 map/baro sensor if any body can help

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 4 Answers

SOURCE: 2000 kia sportage ex, 4 cyl.

Many of the Kia sportages have a problem with the coils.

There are 2 coils for each 2 cyl and they are located under the middle platic cap on the valve cover.

These coils will set a check engine light that blinks when misfiring and stays on steady when the motor is running smooth. Autozone or Advance auto have a scanner that can check all engine functions and will show a problem with # 2 and 4 cyl.

The coil packs are $39.00 to replace but check the codes first

Posted on Feb 17, 2009

  • 10 Answers

SOURCE: 2000 kia sportage. no start no spark no injector pulse.

check both of your fuse panels for a blown fuse. there's 4-5 that control the fuel pump, engine sensors, fuel injectors and such. one of those may be blown and not letting the rest of the system function. one panel is located under hood, and one is under the dash on drivers side. when you take the covers off they have the fuses numbered and tell what they control.

Posted on May 19, 2009

  • 34 Answers

SOURCE: hold lite and and a p1624 code on a 2001 sportage

Code number p1624 is MIL Request Signal from TCM to ECM. which means malfunction indication light(MIL) is requesting a signal from your engine control module(ECM) or Transmission control module(TCM) i would reccomend u take it to the dealership to get it checked out.

Posted on Jun 09, 2009

heavymetal77
  • 721 Answers

SOURCE: losing brake fluid(2001 kia sportage)

Check the rear wheel cylinders if you have drum brakes on the rear. Check the master cylinder cap to be sure it's on right & snug. Use D.O.T. 3 fluid,not synthetic. If you're losing fluid there's a reason. Check the front brake pads & slides for the calipers,could be frozen with rust & eating up the pads. Fluid would seem low if the pads are shot.

Posted on Jun 28, 2009

  • 36 Answers

SOURCE: where is crankshaft sensor on 99 kia sportage?

The crankshaft pos. sensor is located on the left "driver" side of the engine on the bellhousing and is retained by a single 10mm bolt.The sensor may be tight,be sure to twist as you pull so that it doesnt break off in the bottom end.

Posted on Jul 26, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2001 olds alero po108


code p 0108 refers to manifold absolute pressure(MAP) sensor / barometric pressure (BARO) sensor ---high input===causes ---wiring short to positive--MAP sensor ---BARO sensor --- ECM

Sep 28, 2016 | Cars & Trucks

1 Answer

V6. What are the probable causes of DTC P0108?


code p 0108 refers to manifold absolute pressure (MAP) sensor/ barometric pressure(BARO) sensor---high input===causes ---wiring short to positive ---MAP sensor---BARO sensor---ECM
Check /replace the sensors

Jan 09, 2016 | 2004 Lincoln LS

2 Answers

Looking for code 108


Code 108 Refers To Page 108 Of Your Manual It Is About Cruise Control

Jul 14, 2015 | 2003 Chevrolet Cavalier

1 Answer

2009 Kia Ronda code po106


the error codes indicates "manifold absolute pressure (MAP0 sensor/barometric pressure (BARO) sensor - range/performance problem" probable cause = Intake/exhaust leak, wiring, MAP sensor, BARO sensor. That's all I can help you with

Nov 01, 2014 | Kia Rondo Cars & Trucks

1 Answer

What is wrong when the po108 code keeps coming up?


P0108 - Manifold absolute pressure (MAP) sensor/barometric pressure (BARO) Sensor - high input. Probable cause, Wiring short to positive, MAP sensor, BARO sensor, ECM.

Oct 29, 2014 | 2000 Buick Regal

1 Answer

What does code PO108 mean on a 2001 Grand Cherokee


wow , you actually tried to look it up, a 1st time here.

the MAP is a baro sensor used to calculate fuel injection RATES.

if you have gross air leaks to the system the engine IDLE screams.

is it?

108 means the voltage is too high.

usually its unplugged, or bad sensor.

otential causes of a P0108 code: Bad MAP sensor Leak in vacuum supply line to MAP sensor Engine vacuum leak Short on signal wire to PCM Short on reference voltage wire from PCM Open in ground circuit to MAP Worn engine causing low vacuum



Bad MAP sensor Leak in vacuum supply line to MAP sensor Engine vacuum leak Short on signal wire to PCM Short on reference voltage wire from PCM Open in ground circuit to MAP Worn engine causing low vacuum



http://www.obd-codes.com/p0108



and last. but before ECU.

low engine compression, is 1 more, causes , many



what i do is reseat the MAP sensor

i then make sure he vacuum port is not clogged. (both sides)

i then measure the output , keyon, and idle and gunning throttle.

any Voltmeter works here,

key on is 5v or near.

idle 1.8v

gun engine as the RPMs fall like a rock the volts tries to hit 0.5vdc.



http://www.fixkick.com/look/odds-ends/jeep/MAP-sensor-output-real.jpg



very very easy to find with a voltmeter

if the meter agrees with vacuum gage, then the MAP is ok

and you have air leaks or low vacuum for (VAST reasons)

ask.

Aug 19, 2014 | 2001 Jeep Grand Cherokee

1 Answer

Get codes p0068 and p0108


codes p0068 refer to Manifold pressure sensor/mass air flow sensor--throttle position correlation--causes ---wiring---map sensor---maf sensor--mechanical fault.
code p0108 refers to manifold absolute pressure(map) sensor/barometric pressure (BARO) sensor--high input. causes ---wiring short to positive---map sensor---baro sensor---ecm.

Mar 28, 2013 | 2002 Dodge Intrepid

1 Answer

I have a code P0108 Map/Baro Circuit High Input does that mean that my map sencer is nogood


the map/baro circuit could have an internal short suppling incorrect voltage to the wrong circuit.you need to check the voltages,ground,and return voltage at the sensor plug with it connected to the sensor with the key engine off and the car running to see if the sensor is getting the proper voltage and has a good ground,also check the plug itself as it could be the problem

Mar 18, 2011 | 2004 Dodge Caravan

3 Answers

CHECK ENGINE CODE "PO108" WHAT IS THIS AND HOW TO CORRECT


HI. The code and its respective definition will be located below:

P0108 --- Manifold Absolute Pressure/Barometric Pressure Circuit High

Here are a few possible causes for the high signal transfer of the circuit:

  • Leaking EGR valve
  • Vacuum leaks
  • Dirty fuel injectors
  • Wrong fuel pressure
  • Low engine compression
  • Ignition miss
  • Carbon deposits on the intake valves
  • Valve problems
Check the engine for the above faults. If all the points above check out Ok; Replace the MAP sensor.

Aug 20, 2010 | 2005 Ford Mustang

2 Answers

What causes dtc p0170 for a 05 kia sportage


code po170 fuel system too rich or too lean bank 1. this is 5 possible causes 1. air leaks present in the exhaust manifold or exhaust pipes.2.air being drawn in from leaks in engine gaskets or other seals. 3.incorrect fuel pressure or one or more fuel injectors has failed. 4.front ho2s element is contaminated or has failed. 5.a fuel control sensor is out of calibration- baro sensor - ect sensor - iat sensor.

Nov 24, 2009 | 2005 Kia Sportage

Not finding what you are looking for?

Open Questions:

See all 2001 Kia Sportage Questions

2001 Kia Sportage Logo

Related Topics:

137 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kia Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

yadayada
yadayada

Level 3 Expert

75744 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...