Question about Plymouth Neon

3 Answers

Brake Lights. I check for power and I have it to the swith and leaving the switch I replaced the switch and the blinker arm. The blinkers still go off on there own and no brake lights. Their is a large relay part# 04671714aa on the back of the blinker assembly could that be the issue?

Posted by on

  • cizzi May 05, 2010

    I can figure out why these brake lights will not go on does anyone know which wire it is that goes into wiring harness. I am stumpped

  • cizzi May 05, 2010

    The other lights work though I have a good ground. If the ground was bad wouldn't it stop the other lights?

×

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Plymouth Master
  • 6,826 Answers

This is a part only found at the dealer,it is a lighting module of sort,this part number is not any good,except the dealer.

Posted on May 06, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,865 Answers

Yes it could be that or it could be a poor ground due to your brake light ground wire being rusted, or corroded. If you are handy, check the ground yourself. if not go to your local autoelectric repair shop. Joe

Posted on May 05, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 5,081 Answers

Yes exactly that is the problem in your case . Replace it . It will cost around 20 to $25

Posted on May 05, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have no blinkers or brake lights on my 2010 kenworth 900 deisal I have already replaced the blinker switch but nothing fuses under the dash are good also


Dangerous situation. Do you have any tail lights? running lights?
I would guess you have a power connection somewhere before it gets to either of the switches (including brake), a main relay, or separate relays for both brake and blinkers. Possibly a fuse that looks good is not. Volt-ohm meter is good at checking those things.

Apr 01, 2015 | Cars & Trucks

2 Answers

My brake lights and rear blinkers are not working. I have replaced the bulbs in both brake lights. What next?


most blinkers uses relays, and when they flashes fast one light is out, but you replaced your burnt bulb might be a bad relay.

Sep 17, 2012 | 2007 Hummer H2 SUT

1 Answer

I have replaced all my blinker light bulbs and allthe fuses. Put in new flasher fuses and pulled blinker arm and replaced with kit. And the break lights and and blinkers still don't work


on the brake lights, check to be sure the switch located at the top of the brake pedal isn't stuck, you can Jumper the switch to see if that works,

Jul 22, 2011 | Dodge 400 Cars & Trucks

2 Answers

I have a 1992 Buick La Sabre Custom. My brake lights are not working but taillights, turn signals and hazard lights do work. Switch ok. fuse ok. ????????


if your fuse is good. and you have power at the brake light switch and when you hit the brakes you have power coming out the otherside of brake light switch/which would be the white wire/ check that the white wire is sending power up the turn signal switch. if theres power there and your turnsignals work? im afraid that your turnsignal switch is bad rare but it has been known to happen.

Jan 27, 2011 | 1992 Buick LeSabre

1 Answer

1977 Ford F-100 Lights fliker when light switch is turned on, no brake lights. With switch of blinkers and brake lights work fine. with switch on clicking and instrument lights fliker.


does this vehicle have headlight dimmer swith on the floor.if so make sure that it has a good dround
test this switch
if this is not problem replace light switch

Dec 16, 2010 | 1981 Ford F 100

1 Answer

I have no brake lights, the blinkers run really fast and if the headlights are on the blinkers will not run at all while braking. Any ideas?


Have the multi-function switch and its circuits tested. The multi function switch is the blinker arm and the components its attached to in the steering wheel column. The multifunction switch has to do with blinkers, cruise control, wipers, wiper spray, high beams and also tied in with headlight dimmers/daytime running lights(if applicable) and hazards usually.

A good place to start.

Apr 26, 2010 | 2001 Chevrolet Silverado 2500HD

1 Answer

Left and right rear brake lights are out. center brake light comes on. rear blinkers are out too. front blinkers blink fast like a blown bulb but they arent blown. fuses are good.


it sounds like you need to replace the turn signal switch ( also known as a multifunction switch). The brake lights also go through that switch; You will have to remove the cover from around the lower part of the steering column to gain access to the switch.Hope this helps. Please leave comment.

Mar 26, 2010 | 1997 Chevrolet Cavalier

3 Answers

1999 Chev 2500HD - Blinkers only blink when brake applied


the cause of this is the turn signal switch, there are numerous posts about this problem.

Jul 05, 2009 | 1999 Chevrolet Silverado 1500

3 Answers

Break lights


could be fuses email me with more info or questions at meanness628@aim.com

Sep 30, 2008 | 1997 Pontiac Sunfire

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

57 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7689 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...