Question about 2006 Mitsubishi Raider

Open Question

2006 mitsubishi raider passenger power window doesn't work, from the driver side or passenger side control switch

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 17 Answers

SOURCE: 2005 Chrysler Town & Country. Passenger side window problem.

HAVEK 1005 sounds right on track.... but also try this, usually works well for non functional power windows, specially Caravans.

NO COST PROCEDURE TO FIX IT:

1. Sit in vehicle, on seat next to problematic window
2. Ignition key is on
3. Door in question is opened (in case you closed it)
4. While door is open, press and hold power window button in desired window travel, keep button pressed !!
5. SLAM hard the door closed with one hand while other hand holds button as per #4.
6. Watch window operate as it should.
7. Repeat 3-6 if necessary, but usually the first try works!

NOW, for the naysayers that says you must replace power window motors etc, at $$$ cost because the above fix does not work, or is not long lasting fix, or less than a "professional fix".... Well then, when the window fails to operate again, apply same fix again at that time.

I have fixed my van this way numerous times (usually once a year), and to all local friends I recommend this fix too, likewise do the same and are happy with the solution.

Posted on Jul 17, 2010

Ad
  • 3 Answers

SOURCE: Passenger side power window suddenly

I had the same problem with my driver side window, so I just replaced the power window motor. It took less than an hour, cost about $35 or $40 and it works perfectly now.

Posted on Aug 17, 2008

  • 3 Answers

SOURCE: 2003 Mitsubishi Eclipse RS, driver side window won't work.

test at the motor inside the door to see if you have power ,could be the motor itself

Posted on Oct 19, 2008

fknstart
  • 404 Answers

SOURCE: Driver side power window stops working in 2003 mits. eclipse

the switches need cleaning ,they have contacts in them that get dirty you can spray contact cleaner on them or use emery paper to file them, they are not to hard to pull apart

Posted on Jan 16, 2009

taztheman042
  • 19 Answers

SOURCE: 380 ES Mitsubishi 2006 model door window control

It possably isnt the switch it maybe the motor itself if you open the door panel and disconect the moter run 2 wires to the main battery becarefull because when you do this the motor may or may not work if the window goes up or down when you do this then your moter is good if not replace motor otherwise switch your wires from one switch to anouther that you know is good and try to see if it works then your switch may be bad.. do to the drivers window being used the most the switch or motor will go bad sooner then the others

Posted on Jan 25, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Passenger power window stopped working with either controls


Power Windows not working - CarGurus

www.cargurus.com > Questions > Honda > Accord

CarGurusOct 9, 2012 - Power Windows not working - I have a 2006 Honda Accord and thepassenger and back power windows quit working all at once. ... My key less entry doesn't work either after I replaced the master Window control unit. 6 out of ...

Passenger Power Window Not Working ' ClubCivic.com - Your Online ...

www.clubcivic.com > ... > Interior / Audio / Electronics
Oct 28, 2009 - My passenger side window is not responding to either the driver side orpassenger side switch. It is in the up position and wont go down.

Jan 19, 2016 | Cars & Trucks

2 Answers

The passenger side brake light, and passenger side (front and back) window control doesn't work is it a fuse?


Well, the short answer is no.
The lights and windows are are different fuses.
There's a slight chance you have a problem with a ground wire on that side, but I doubt the two problems are related.
I would check the light for power and ground, and look at the window switches for power and ground. The windows are powered thru the driver switch on most cars.

Jul 17, 2012 | 2004 Oldsmobile Alero

1 Answer

WHAT is the firing order on a 2007 Mitsubishi raider ls 3.7


Driver side, starting in the front "by bumper/ working back to cab" 1.3.5! passenger side front to back 2.4.6! i own the same truck and im telling you SELL THAT P.O.S! its gonna cost you a ton of cash once you pass 90K miles!

Jan 21, 2011 | 2007 Mitsubishi Raider LS

1 Answer

Cant find owners manual. how do i get to get jack out from under the seat so Ican change a flat can you help me


In my raider to get to the jack I lift up on part of the seat you sit on Both sides rear passenger and rear driver seat lift up. :) hope this helps

Oct 17, 2010 | 2006 Mitsubishi Raider

2 Answers

Passenger window won't work its elelectric, acts like no power to it. Is there a fuse I have no book and can only find the master fuse box under hood?


Hi their is only one fuse for the windows and thats the one you have checked, if the other windows are working then the fuse will be ok.

if the drivers door has a seperate control for the passenger door try this and if it wont work from either the passenger side or the drivers side then the problem is going to be either the motor or the regulater and these are both inside the passenger door.

if how ever the drivers and passenger controls are seperate and you cant control the passenger side for the drivers door controls then what you can try is swapping the switches over from the drivers door to the passengers door, if the controls are the same then all you need to do is get a flat bladed screwdriver and pry the control up as its only pushed into place then unclip the wires and swap the switches over then if the passenger side then works you know you need to get a new switch of it still dont work then it will be either the motor or regulater at fault.

either way the door panel will need removing and you will need to test if you have any power going to the motor.

let me know if you need further assistance ok

plz rate this solution as i have a whole page of unrated posts, thanks

Sep 15, 2010 | 2006 Dodge Grand Caravan

2 Answers

The power window on the passenger side of my 2007 mitsubishi raider does not work from the passenger or driver side. What is cause this


hi, as the problem is with both sides then this would indicate a problem with either the motor or the regulater on the motor, you can buy these parts and can fit them yourself if your mechanically minded.

it would involve you taking the door panel off and checking to see if you have power going to the motor or not if you dont then you need to replace the regulator if you do have power to the motor then you need to have the motor replaced.


May 05, 2010 | 2006 Mitsubishi Raider

2 Answers

Passenger power window not working when outside temp is above 65 F


There was a recall for this problem,check with a mitsubishi dealership-we had to replace the switch assy.-good luck

Apr 15, 2010 | 2008 Mitsubishi Raider

1 Answer

1999 Buick Century - passenger side power window does not work


Replace the Driver side window switch. These have a corrosion issue.

Mar 27, 2009 | 1999 Buick Century

2 Answers

Passenger side power window suddenly quit working. Window is in "up" position, but will not work from either the driver control switch, nor the passenger control switch.


I had the same problem with my driver side window, so I just replaced the power window motor. It took less than an hour, cost about $35 or $40 and it works perfectly now.

Aug 12, 2008 | 2001 Mitsubishi Eclipse

2 Answers

New battery in 06 mazda 6


1. Turn ignition switch to "on" position.
2. Open passenger window completely from passenger side window switch.
3. Close passenger window completely from passenger side window switch, and hold switch for an additional 2 seconds.
4. Turn ignition back to "lock" position.

That's it. Works like a champ. And here you thought it was more than just a battery dying....I did.

Aug 11, 2008 | 2006 Mazda 6

Not finding what you are looking for?
2006 Mitsubishi Raider Logo

Related Topics:

145 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8516 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...