Question about 1998 Mitsubishi Diamante

1 Answer

It blow when i put a new fuse in - 1998 Mitsubishi Diamante

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 766 Answers

There is a short in the circuit corresponding to the fuse. Check every electrical component in the circuit and disconnect it. Put in a new fuse. Connect each component, one at a time, back into the circuit and check the fuse each time. Eventually you will establish which component is causing the short circuit. If the fuse blows before you can put a component back into the circuit for the first time then is sounds like some insulation on the supply wire has broken down and is allowing contact with the body of the car creating a short circuit. Check all the wiring for this circuit and replace or wrap any bared wire in insulating tape.

Posted on May 05, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

FUSE KEEPS BLOWING


It sounds like the A/C compressor clutch is shorted. You will need to have the clutch and / or the complete compressor replaced.

Mar 21, 2014 | Chevrolet Uplander Cars & Trucks

1 Answer

1993 grand prix.blows brake light fuse when u apply brakes


hot wire touching metal fuse blows so you don't burn up the wiring get it tested and fixed soon could be dangerous to keep putting in a new fuse

Jun 24, 2013 | 1993 Pontiac Grand Prix

1 Answer

1999 ford escort wagon my brake light fuse blows everytime i put one in


remove your tail light bulbs than put in a new fuse if it does not blow it is a bulb socket put one bulb back in check the fuse if it blows remove bulb. than put bulb in other socket if it doesnt blow with new fuse you will know what socket to replace. if this was helpful please leave feedback

Apr 12, 2013 | 1994 Ford Escort

1 Answer

CTSY fuse keeps blowing


ok have your replaced any bulbs? i have found putting bulbs in wrong or just being a bad light bulb can blow fuses. try replacing all bulbs with new ones. its cheap and it could be the problem

Mar 18, 2013 | 2008 Chevrolet Silverado 2500HD

1 Answer

Mazda 626 ac fuse keeps blowing


Try unplugging the compressor then put in a new fuse. If the fuse does not blow, the problem may be the clutch on the compressor.

Jul 29, 2012 | 1997 Mazda 626

1 Answer

01 kia rio keeps blowing the injector fuse every time i put it in first and take off how do i fix it


You may have a shortted injector. Pull all the injector connections off, put a new fuse in. If it still blows the fuse, you must have a short in the injector drive circuit from the ignition switch to the injectors. I don't know what all is in the circuit, but you may have a resistor pack before the current reaches the injectors
If the fuse did not blow, then one at a time, reconnect the injectors. You are looking for a shorted injector that blows the fuse. If the first connection blew the fuse, disconnect that one, put in a new fuse, and start with a different injector connector. You may find one that blows the fuse, meaning it is shorted, and needs replacing.
Good luck.

Apr 08, 2012 | 2001 Kia Rio

1 Answer

Radio Fuse blows


any time a battery is hooked up backwards anything that contains diodes will have to be replaced.unplug the radio and see if you can put the fuse in without it blowing.when you get the vehicle going have the alternator tested,it also has diode in it.good luck.

Sep 30, 2009 | 2000 Nissan Xterra

1 Answer

Blowing 30 amp engine control fuse.


You say it eventually allows you to put new fuse in, do you mean when it sits for a while, a new fuse won't blow, but if it blows and you immediately replace it, it blows again instantly?

Sep 05, 2008 | 1997 Dodge Ram 1500 Club Cab

Not finding what you are looking for?
1998 Mitsubishi Diamante Logo

Related Topics:

70 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...