Question about 2000 Pontiac Sunfire
Are the front seats interchangeable on a pontiac sunfire from a 1997 model and a 2000 model
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Hello oldiro: My name is Roger and I can help. From under the vehicle look up between the transmission and the side of the block. Mid motor above the pan rail there is a bolted in sensor. This should be the crank sensor.It will have two wires plugged in to it. Please rate this answer as this lets us know you received the information you asked for. Should you need further help please just ask. Thank You for using FixYa. Roger
Posted on May 06, 2009
Remove wheel, caliper and rotor. hit it solidly with a good hammer and it should go right through and fall out. Sometimes you will need to grind a bit off the side of the new one to get it past any obstructions. That will not harm its performance in any way unless you take way more than you need to off of it.To get it all the way back in, oil the threads, put a stack of large washers on it and tighten the nut on backwards till you draw it all the way in.
Posted on May 28, 2009
Your thermostat is located under the thermostat housing, which is what the upper radiator hose clamps to on the top of your engine. Basically, you need to start with a cold engine, drain your radiator, then unclamp the upper radiator hose from the engine. Remove the bolts from the thermostat housing, and gently tap on it to remove it. clean up the mounting surfaces on both the engine and the housing, and install a new thermostat, and new gasket. tighten to proper torque, reconnect the radiator hose, then refill up the radiator and cooling system.
Posted on Nov 24, 2009
Testimonial: "Thank you, very helpful"
There should be tiny holes in the plastic covers at the base of the chrome rods attached to the headrest use a paper clip and push it in the holes as you pull on the headrest in the full up postion.
Posted on Dec 23, 2009
Tips for a great answer:
Feb 24, 2015 | 2005 Pontiac Sunfire
Apr 06, 2013 | 2000 Pontiac Sunfire
Dec 24, 2012 | Cars & Trucks
Jul 06, 2011 | 2000 Pontiac Sunfire
Mar 21, 2011 | 1997 Pontiac Sunfire
Aug 30, 2010 | 1997 Pontiac Sunfire
Mar 10, 2009 | 1997 Pontiac Sunfire
Mar 04, 2009 | 2000 Pontiac Sunfire
Mar 20, 2017 | 2000 Pontiac Sunfire
46 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: