Question about 1993 Mercury Sable

1 Answer

How to get to the front moter mount on a murcery sable 1993

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 2,317 Answers

I did them at Ford, but it's been awhile. I believe you at least need to unbolt the A/C compressor. But make sure you get a swivel 18mm medium depth socket, a shallow 18mm isn't deep enough to get on the nut. And there isn't enough room to get a deep well 18mm onto the nut. They are rather difficult to do.

Posted on May 05, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Coad book 2002 murcery sable 3.0 p1131

I am sorry as this model is not in our country, our safety standards are a physical test and inspection in a test center. Vehicles with a computer code should be taken to a dealer for a down load and a estimate or quote given, then it is up to you where you get this work carried out. Be careful some times the dealer can repair better than some independent shops, get 2 or 3 estimates first. P

May 28, 2014 | 2002 Mercury Sable

1 Answer

After changimg plugs gaped at .054 car will start but won't stay running on a 2000 murcery sable

Make sure that is it the right gap for the car and that the spark plugs are all the way in there and that the spark plug wires are on the plugs

Feb 14, 2013 | Cars & Trucks

1 Answer

Replace front mounts on su b frame of 97 Sable

there really easy support the frame with a jack and pull the two 18mm bolts the dealer sells the replacement mounts.

Aug 08, 2010 | 1997 Mercury Sable

1 Answer


all of them are located on the exhaust..2 on each exhaust

Apr 21, 2010 | 2000 Mercury Sable

1 Answer

How to replace a front motor mount on a 1993 Mercury Sable 3.0 V6

To change the right front motor mount on a mercury sable. 1. you will need a jack and 22mm and a 5/8 socket.
2. you want to place the jack under the catalyst converter or somewhere on the motor that will lift the motor separatly from the crossbar that the front mount is attached to.
3. apply a little lift to the jack raising the car(3 or 4 hydraulics jack lifts).
4. using the 22 mm socket wrench take the bottom nut off the mount which is located under the right side of the crossbar.
5. using the 5/8 socket remove the top bolt that attaches the mount to the motor.
6. raise the jack 2 or 3 more times( giving you more room to move the old mount out).
7 . remove the old mount paying close attention to the way it is positioned, being sure not to put the new mount in wrong.
8. apply the new mount.
9. apply the top bolt and tighten .
10. lower the jack until the mount is seated correctly onto crossbar.
11. apply bottom nut and tighten.
12. glad i could help!

Nov 03, 2009 | 1993 Mercury Sable

Not finding what you are looking for?
1993 Mercury Sable Logo

Related Topics:

38 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts


Level 3 Expert

79847 Answers


Level 3 Expert

5685 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides