Question about 1986 Nissan Pickup 4WD 1986

1 Answer

STARTER WONT TURN - 1986 Nissan Pickup 4WD 1986

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Nissan Master
  • 1,779 Answers

You probably already checked, but 1st thing to do is make sure the battery is good, fully charged, and cables are clean at connections, and tight. If so, Pull the starter out and bring it to a parts store where they will test it for free and let you know if it is shot. You can also remove it, attach jumper cables to it (neg. to metal body of starter, pos. to connection where battery cable was). Stand back as when you touch the pos. cable it will (if working properly) advance the gear on the shaft in the starter and then spin (to crank the engine over if it was mounted in place). This is a rather violent and very quick event, so stand back and be careful.

Posted on May 05, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

T2005 Neon wont st art,no fire to plugs. no impulse to injectors, starter wont turn with key.


check for battery terminals ,starter fuse ,check if key has chip inside. use original key,.maybe new battery,chek that first,and we go from there.

Mar 03, 2015 | 2005 Dodge Neon SXT

1 Answer

New Starter, Wont Turn Over


Check the battery ground and the bonding strap from the body to the engine block.

Oct 15, 2014 | Cars & Trucks

1 Answer

92 subaru loyal wont turn over and makes humming nouise in cab


If the starter does not engage you will hear the "growling" in the cab which is usually the fuel pump and is a normal noise, more apparent because of the lack of engine noise. First thing to check is the wiring to the starter under the hood. If it is ok could be contacts in the starter solenoid , starter brushes or a"dead" starter. I would try tapping the starter with a SMALL hammer or the end of a I/2 inch breaker bar while having an assistant turn the key to attempt starting. Stand on driver's side, If spare is mounted under hood, remove spare. The starter is visible and can be tapped from there.

Feb 10, 2014 | 1992 Subaru Loyale

1 Answer

What's your problem?starter wont turn engine


Could be electrical or mechanical.
Does the crankshaft turn by hand ?
Have you checked for voltage at the starter, the neutral safety switch, and the key switch ?

Aug 29, 2012 | 1999 Isuzu Rodeo

1 Answer

2003 cts wont start. i jumped the starter and won't turn over. Battery says 11.9 volts could it be the battery or starter?


Battery voltage is definitely and issue. Charge your battery and have it tested before condemning the starter.

Jul 08, 2012 | 2004 Cadillac CTS

1 Answer

Turn switch on and all the lights work but the starter wont engage


If the starter wont turn...Id check / replace starter solonoid.
If the starter turns but doesn't engage the flywheel...I'd check / replace the bendix.
If starter checks good and bendix is good...I'd look at the teeth on the flywheel.

Hope this helps...

Jul 23, 2011 | 2005 Jeep Wrangler

2 Answers

I have a mitsubishi pajero it wont start when turn


bad starter or starter connection , check connection on starter

Mar 22, 2010 | 1995 Mitsubishi Montero

1 Answer

2003 mazda has a good battery and wont turn over. Lights and radio all work good


if the battery is good but the starter wont work then you need to replace your starter. it is held on by two bolts and has 2-3 wires on it. the hardest part of changing the starter is getting to it. sometimes the starter turns but wont turn the right speed anymore, so the engine wont fire.

Jan 30, 2010 | 2003 Mazda Protege

1 Answer

1998 buick lesabre wont start


Do you have a Chip in the Key? if so that Could be the Problem,Ya see the chip is a resistor and if it looses its ELECTRONIC VALUE in its Case Resistance it wont start to test this Turn the Key in the ON posission then do the Screwdriver thing If it Starts Key is Good and Most Likely the Ignition (SWITCH) is Bad <<ELECTRICAL Side NOY LOCKEST SIDE For More Info Recontact Me
rejakwilson@aol.com<<<<<<<<<<<<<<<

Dec 23, 2008 | 1998 Buick LeSabre

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

61 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...