Question about 1998 Mitsubishi Mirage

3 Answers

Part name and number needed...1998 Mitsubishi Mirage 2-door coupe...i bought the car, the front passenger side turn signal/parking light was broken and right front blinker wasn't working...ordered whole new assembly...went to install new assembly and noticed that the part the bulb plugs into, one of the wires is cut...i need a new connector or terminal or socket, i'm not exactly sure what part it is. it is where the wires go into and the whole part plugs into the back of the light. i can't find it anywhere online or in stores? Help!!!!

Posted by on

  • megandau84 May 07, 2010

    looks like that is what i'll have to do...thank you

×

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Expert
  • 312 Answers

Call your Mitsubishi dealer. The parts department surely has the part number and probably can order it for you if they don't have it.

Posted on May 06, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 11,896 Answers

Usually this is a part that can only be ordered from the dealership itself. If anybody would have it. it would be autoanything.com or rock auto

Posted on May 05, 2010

  • Nate Stansfield
    Nate Stansfield May 06, 2010

    Should be an imprinted number on the outside of the socket. Otherwise dealer can tell you the number.

    You can buy the bulb sockets at:

    www.autolightsbulbs.com
    www.rockauto.com

    If they don't have them, you will have to order from the dealter or go to junk yard.


  • Nate Stansfield
    Nate Stansfield May 07, 2010

    Not a probem. Thank YOU for using Fixya! Come back anytime and feel free to ask any other questions you may have.

×

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 229 Answers

Hi,
I search around for any pictures of diagrams for the light bulb connector or wireharness assembly. No luck
Since you have identified the cut wire, what I would do is strip the wire and twist it together and then solder it. Wrap it back up with Electrical tape.

Posted on May 05, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2001 Mitsubishi Mirage, 2 door, 1.8 litre. Turn signals all work, front & back. Recently, turn signals on R/H side are blinking much faster???


That happened on my Nissan. All the replacement light bulbs have the be the required wattage. Check for a burnt bulb, that changes the flashing rate on some cars. The flasher if not OEM may flash at a different rate. If none of these are the problem, you may want to check the Ground resistance of the light socket.

Apr 29, 2017 | Mitsubishi Cars & Trucks

2 Answers

Why aren't my break/tail lights working on my 1995 Mitsubishi mirage? No fuses or bulbs are blown.


Well the brake-turn signal and tail lights are on two different circuits, but share a common ground.
If the ground is good, and the parking and turn signals work in the front, it could be a wiring problem.

Apr 08, 2015 | 1995 Mitsubishi Mirage

2 Answers

ELECTRICAL PROBLEM


take it to a body shop

Nov 27, 2013 | 2000 Dodge Stratus

2 Answers

I have a 1998 chevy suburban. The dome lights don't work. checked fuse box under hood. All good. Are there other fuses on the truck?


Instrument Panel Fuse Block
The instrument panel fuse block access door is
located on the driver side edge of the instrument panel.

Pull off the cover to access the fuse block.

The vehicle may not use all of the fuses shown.

Fuses Usage
1 Rear Seats
2 Rear Accessory Power Outlet
3 Steering Wheel Controls Back light
4 Driver Door Module
5 Dome Lamps, Driver Side Turn Signal
6 Driver Side Turn Signal, Stop lamp
7 Instrument Panel Back Lighting
8 Passenger Side Turn Signal, Stop lamp
9 Passenger Door Module, Driver Unlock
10 Power Door Lock 2 (Unlock Feature)
11 Power Door Lock 2 (Lock Feature)
12 Stop lamps, Centre High Mounted Stop lamp
13 Rear Climate Controls
14 Power Mirror
15 Body Control Module (BCM)
16 Accessory Power Outlets
17 Interior Lamps
18 Power Door Lock 1 (Unlock Feature)
19 Rear Seat Entertainment
20 Ultrasonic Rear Parking Assist, Power Liftgate
21 Power Door Lock 1 (Lock Feature)
22 Driver Information Centre (DIC)
23 Rear Wiper
24 Cooled Seats
25 Driver Seat Module, Remote Key less Entry System
26 Driver Power Door Lock (Unlock Feature)

Aug 23, 2011 | Chevrolet Suburban 2500 Cars & Trucks

2 Answers

My 2008 Chevy Cobalt coupe has a passenger side turn signal that flashes fast on the instrument panel. However, no turn bulb is burnt out in either the front or rear. The rear passenger turn blub just...


It is as simple as your hazzard switch needs to be replaced yes your hazzard switch as now turn signals are built threw the hazzard switch my PT Cruiser had same problem as my s10 replaced hazzard switch fixed the problem

Aug 18, 2011 | 2008 Chevrolet Cobalt

1 Answer

The light on the lower front bumper on the passenger side is broken. I think this light goes on when the turn signal is on. What is this part called and does it have to be bought at a dealer?


it is called a courtesy light.that is if there is a white light that comes on steady.the other half is the turn signal which blinks.you may be able to get one in good shape from a wrecker

Oct 23, 2009 | 1999 Buick Park Avenue

1 Answer

I have a mitsubishi mirage 2000 and my driver side


u are going to have to replace the turn signal switch to correct this.

Sep 02, 2009 | 2000 Mitsubishi Mirage

2 Answers

Turn signal


first it is not call realy it is call flasher try to ask for the turn signal lights flasher
but most likelly is not going to be a flasher problem since the turn signal sw trigers the flasher.

May 31, 2008 | 1994 Mitsubishi Mirage

Not finding what you are looking for?
1998 Mitsubishi Mirage Logo

Related Topics:

41 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...