Question about Chevrolet Astro

2 Answers

I had no air coming from the vents but from the floor and defrost, i changed all hoses and heater control valve which broke while fixing . i cant find the hose that runs across the motor on the drivers side it broke off and my repair air wont come out the vents, where does it connect and i need a diagram of the other hoses it all got mixed up when taking it apart again i had a brain fart and cant remember where they go, can you help ?

Posted by on

  • Anthony Broccone
    Anthony Broccone May 05, 2010

    the dealer doesnt have access to what i need they said its to old? they said go to eautorepair and pay 10 dollars to get info . im not sure thaT WILL WORK IM VERY FUSTRATED. please help

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 2,984 Answers

SURE! fIRST THING IS, I NEED THE YEAR AND MODEL....ENGINE SIZE WOULD HELP TOO.

Posted on May 05, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Chevrolet Master
  • 1,851 Answers

LOL - brain fart - got to love it. I have had my share.
Ok now on this project. The FAST and SURE way is to simply take down your vin number and call or go to the local dealer. The reasoning is this - with so many newer cars avoiding recalls many companies change mid year the way things are routed and heat distribution hoses are no different.
If I get you the wrong one based on year - make and model it will still not be as sure as using the dealer. The dealer will give you a FREE PRINT OUT. Also - while you're there ask about RECALLS and SERVICE BULLETINS - the RECALLS alone can save you thousands and maybe even your life as safety recalls are for the life of the vehicle.
I know this SEEMS like the long way - but you will be much better off with the absolute factory print out to where you will be charged nothing and they are for your specific vehicle.
Best of it on your project and may your brain be gas free.
i had no air coming - 941b82b.jpg

Posted on May 05, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have no heat thru the vents, just blows cold air. do I need a new thermostat? or is my heater control valve stuck?


Most cars today do not have a water diversion valve for the heater core; rather they use a blend door in the ducting under the dash. There are a pair of them. One door diverts input air either through the heater core or the A/C evaporator, or both. This will control temperature. The other door diverts air to the floor vents, dash vents, or the defroster vents. These doors are vacuum-controlled on most models. You could have a door problem, or possibly a clogged heater core. To check the heater core, run the vehicle to operating temperature, and then trace the heater hoses to where they enter the firewall. Check each hose for temperature. The inlet hose should be very warm to the touch, and the outlet one the same or slightly cooler. If the outlet hose is much cooler than the input, there is probably a restriction in the heater core.

Nov 17, 2015 | Cars & Trucks

1 Answer

Why wont my 2001 ford windstar blow out of vents ? only on defrost?


Air Flow Control
Air flow control is accomplished in the following manner:
  • Primary control is through the function selector knob , mounted on the heater function selector switch, which is part of the heater control .
  • The function selector knob has the following positions: OFF, PANEL, PANEL/FLOOR, FLOOR, FLOOR/DEFROST and DEFROST.
  • The heater function selector switch combines a vacuum selector valve with an internal electrical switch.
  • The vacuum selector valve directs source vacuum to various vacuum control motors (18A318) . Refer to the System Airflow Schematic and Vacuum Control Charts.
  • An internal single-pole electrical switch is also controlled by the selector. The switch controls the electrical supply to the heater blower motor switch (18578) .
  • The position of the function selector knob determines the manner in which the system will operate.
  • Each position of the function selector knob is detented for positive engagement.
  • You probably have a vacuum leak , Pull heater control panel an check for vacuum . A broke vacuum hose or The vacuum selector valve is bad ! Or check for a vacuum hose in the engine compartment being off somewhere !

Mar 08, 2015 | 2001 Ford Windstar

1 Answer

2007 merc grand marquis heater air comes out all of the vents and very little out of the defrost vents


Check to make sure the engine vacuum is getting to the heater/ac control. Bad vacuum hose or leak. Many vehicles use engine vacuum to move heater doors and controls. When the vacuum is absent, it usually defaults to air blowing out the AC vents.

Feb 01, 2014 | 2007 Mercury Grand Marquis GS Sedan

1 Answer

1996 Montero Heater Blower not working


I assume your heater setting is electric control, if so either your defrost and floor heat switch failed or wire problem. For the air not hot, check the heat control valve on the top of the hose it should be in front of the firewall. I don't know your car is using mechanic valve or electric control valve. Anyway check there first. Good luck.

Nov 24, 2013 | 1996 Mitsubishi Montero

1 Answer

Cant get my heater to change from vent to defrost or floor


vacuum line cracked or broke,,,check ones connected to heater control valve.

Jan 18, 2011 | 2004 Chrysler Pacifica

2 Answers

The defrost and the floor vent does not work in my 2005 Dodge Neon... It sounds like the air is blowing in the dashboard, but does not come out of the vents


If there is no vacuum to the mode door control motor theheater/A/C system will default to "Defrost" If there is no air coming out the vents or floor - check to see if you have air blowing out the defrost vents. If there is air coming out the defrost, then the most likely cause of your problem is a broken or disconnected vacuum line that feeds the mode control switch. On your vehicle, the vacuum supply line connects to the brake booster hose under the hood. there is a check-valve on the line between the firewall and the brake booster that can fail and leak vacuum. if there is no problem with the vacuum supply line under the hood, then the most likely cause is a bad mode control switch. (switch leaking vacuum)

If there is no air coming out the defrost vents, but you can hear the blower motor running, there is most likely a resriction of airflow etween the blower motor and the air outlet plenum. I have seen A/C evaporators completely cloggedup that will not pass any air. I have also seen paers and napkins that have gotten sucked out of the glovebox area and into the "Recirc" air inlet. Another thing I have seen several times is nests made by mice or other small rodents in the blower motor housing.

Dec 05, 2010 | Dodge Neon Cars & Trucks

1 Answer

The Heater selector won't change from defrost to any other settings like floor heat or straight from the dash . the switch on the dash moves but the heat only comes from the defrost vents in the dashboard


hello, sounds like the cable broke or, lots of newer veichels use air lines, any way possible, check and see if air lines are still hooked up to the back of the heater controls, should be 4or 5 air lines together, all hook on one place behind heater controlls

Feb 06, 2010 | 1993 Jeep Grand Cherokee

1 Answer

1988 1500 series half ton. Air vents to mid dash and defroster won't open up. Heat and air blows on the floor only.


It sounds like the door on the defroster isn't opening. Check for a vacuum leak and also check the temp.control valve this should have several vacuum hoses coming from it. This valve controls all the doors, Bi-level, Defroster, and Floor positions.

Oct 05, 2009 | 1988 Chevrolet K1500

1 Answer

Problem with air not coming out of vents.


Check for a vacum leak from the engine to the a/c.The color of the hose is black. Also check if the heater control valve hose is unplugged. If you have vacuum the it sounds like the door for the vent/floor/defrost is broken.

Jun 08, 2009 | 2004 Ford Ranger

2 Answers

Heater/AC only blowing out of defroster vents


vacume hose off or cracked it wont change to floor heat ooorrr field mice have made them selves a home in your heater box

Dec 12, 2008 | 2004 Jeep Wrangler

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...