Question about 2005 Hummer H2
Look in the fuse panel by opening the driver;s door and removing the panel on the side of the dash. There is a fuse specifically for the right and left sides. Double check that fuse. This is most likely. Let me know if you need anything else.
Posted on May 09, 2010
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Jan 03, 2015 | 1991 Ford Probe
Dec 06, 2014 | 2001 Ford Ranger Regular Cab
Mar 06, 2014 | 2002 Dodge Durango
Jan 25, 2013 | 2005 Pontiac Grand Prix
Dec 26, 2010 | 2005 Chevrolet Cobalt
Changing front, right turn signal on 2005 Buick Terraza:
Open hood; when facing the front of vehicle, the right turn signal is on the passenger
side (left). The headlight assembly
needs to be removed to easily reach the turn signal. On my vehicle, there is a 10 mm screw on the
left side. Remove it. There is L-shaped pin on the right side of
the headlight assembly. Swing the pin counter-clockwise
(to the left). Pull the pin straight up
to remove. The headlight assembly is now
loose, but there is a pin snapped in a socket on the back of the assembly that
still holds the assembly. Pull the
headlight assembly hard and straight to the front of the vehicle. When it snaps loose, the assembly is now held
just by the rubber gasket surrounding the assembly. You need to gently work the right side of the
gasket out of the grill cowling. The
assembly should pull straight out. The
wires are long enough to lay the headlight assembly in the engine compartment. Finally, the turn signal is now accessible. Twist the light holder counter-clockwise and
pull out the light holder. Change the
bulb. Do not punch your man-card for
credit until you have successfully reinstalled the headlight assembly. It goes back in a little easier the second
time. Once you have put the L-pin in
place, the screw back, and successfully tested the lights, you can now punch
I give the mechanical engineers and designers a D-minus instead of an F only because I was successful on the first try. No light bulb on anything commonly used by people should be this hard to figure out.
Sep 07, 2010 | 2005 Buick Terraza
Aug 18, 2010 | 2005 Honda CR-V
Jul 16, 2009 | 2004 Dodge Ram
Mar 10, 2017 | 1992 Ford Explorer
136 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: