Question about 1993 Ford Escort 4 Door

1 Answer

Exhaust pipes under engine loose. you can see it

Exhaust pipes under engine loose. you can see it when you look down between engine and firewall

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 667 Answers

Your exhaust pipe under the engine is a flex pipe connection to prevent it from breaking with engine movement. there is a bracket the holds the pipe mounted to the oil pan, check and see if this bolt is still there it often falls out. Hope this helps.

Posted on Jul 07, 2010

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Where's the 02 sensor on my 2000 park avenue?

The first one is between the engine and the firewall, about in the center of the car, mounted in the exhaust manifold. The second one is under the car behind the catalytic converter, mounted in the exhaust pipe. The only things in the exhaust that have wires running to them.

Dec 30, 2014 | Cars & Trucks

1 Answer

Where are the 02 sensors on a 2002 Buick Lesabre 3.8L?

The O2 sensors are in the exhaust. Your have up stream and down stream. The upstream is right behind the engine in the down pipe back by the firewall. The downstream sensor is under the car back by the catalytic converter.

Apr 21, 2013 | Cars & Trucks

1 Answer

Replace oxygen sensor

oxygen sensor is located in the exhaust pipe just as it leaves the engine, it monitors the exhaust gas as it exits the engine, look down between the back of engine and the firewall. peek-a-boo ! some cars have (2) one @ the exh. pipe before the CATalitc converter. use a 7/8 " wrench, wd 40 will help also. tight is tight too tight is broke.

Jan 15, 2013 | 2000 Chrysler Cirrus

1 Answer

Where is thermostat in 2001 chevy cavalier 4cyl

Pretty sure its in between firewall and engine theres a silver pipe under exhaust manifold serp belt side is water pump ,drivers side is t stat housing,u gotta remove exhaust manifold and that crossover pipe its a fun one... cant find a good picture sorry

Nov 28, 2012 | 2001 Chevrolet Cavalier

1 Answer

How to replace water pump on 1991 pontiac quad 4

2.3L Engine
  1. Disconnect the negative battery cable
  2. Detach the oxygen sensor connector.
  3. Properly drain the engine coolant into a suitable container. Remove the heater hose from the thermostat housing for more complete coolant drain.
  4. Remove upper and lower exhaust manifold heat shields.
  5. Remove the bolt that attaches the exhaust manifold brace to the manifold.
  6. Break loose the manifold to exhaust pipe spring loaded bolts using a 13mm box wrench.
  7. Raise and safely support the vehicle. NOTE: It is necessary to relieve the spring pressure from 1 bolt prior to removing the second bolt. If the spring pressure is not relieved, it will cause the exhaust pipe to twist and bind up the bolt as it is removed.
  8. Remove the manifold to exhaust pipe bolts from the exhaust pipe flange as follows:
    1. Unscrew either bolt clockwise 4 turns.
    2. Remove the other bolt.
    3. Remove the first bolt.
  9. Pull down and back on the exhaust pipe to disengage it from the exhaust manifold bolts.
  10. Remove the radiator outlet pipe from the oil pan and transaxle. If equipped with a manual transaxle, remove the exhaust manifold brace. Leave the lower radiator hose attached and pull down on the outlet pipe to remove it from the water pump.
  11. Carefully lower the vehicle.
  12. Remove the exhaust manifold, seals and gaskets.
  13. Loosen and reposition the rear engine mount and bracket for clearance, as required.
  14. Remove the water pump mounting bolts and nuts. Remove the water pump and cover assembly, then separate the two pieces.

Feb 23, 2012 | 1991 Pontiac Grand Am

2 Answers

I am not sure where the o2 sensors are on my 2003 ford taurus

on the downpipe..between engine and the firewall..look down over top the will see it sticking out of the exhaust downpipe

Jan 24, 2011 | 2003 Ford Taurus

1 Answer

Where is my 02 sensor on my sonoma? its a 94 with the 4.3 liter vortec motor.

There will be two of them.
One right after the manifold coming off the engine in the exhaust pipe
The second on is halfway down the vehicle in the exhaust under the car after the firewall
Please let me know if this helps

Jan 20, 2011 | 1994 GMC Sonoma

2 Answers

Can u please give me an idea where is the crank shaft sensor really located at on a 98 dodge plymouth voyager

3.0 3.3 and 3.8 liter engines look down on the back side of the engine on the firewall side. It will be under the crossover exhaust pipe and bolted to the transmission. It will have three wires going to it.

Dec 08, 2010 | 1998 Plymouth Voyager

2 Answers

Were are the 02 senors located on a 2001 saturn L100

This is a 4 cylinder right? Open the hood and look down between the engine and firewall, this is behind the engine. You will see the exhaust pipe, follow the exhaust pipe up to where it is bolted to the exhaust manifold. You will see the upstream O2 sensor screwed in there, more or less horizontally with wire connector pointed at driver side of car. Now get under the car and find the catalytic converter in the exhaust pipe, a big bulbous thing, the downstream O2 sensor will be after the converter, but before the muffler and will also have an electrical connection.

Aug 03, 2010 | 2001 Saturn L-Series

2 Answers

02 sensors

They screw into the exuast, 02s1 is before cat convertor, It checks emissions prior to the convertor, 02s2 is after the cat convertor, it verifies the convertor has done its job

Jun 10, 2010 | 1998 Chrysler Concorde

Not finding what you are looking for?
1993 Ford Escort 4 Door Logo

Related Topics:

132 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers


Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides