Question about 1997 Ford Escort

Open Question

Need to know how to set up timing marks to replace timing belt

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

martin538
  • 117 Answers

SOURCE: dohc timing marks

This should help you.2724662.png

Posted on Apr 12, 2009

tripletauto
  • 1450 Answers

SOURCE: timing marks

2993b98.gif
this is for 1.9

Posted on Aug 21, 2008

  • 234 Answers

SOURCE: setting timing marks on a 1998 Ford Escort

think u need a tool it locks the engine at top dead centre then u line cams up

Posted on Jun 07, 2009

Gozer
  • 435 Answers

SOURCE: need diagram for timing belt replacement on 93 ford ranger

I found this website, hope it helps.
http://www.2carpros.com/forum/1993-ford-ranger--timing-marks-vt341394.html

Posted on May 20, 2010

BCAS1298
  • 3092 Answers

SOURCE: setting timing belt 2.0 split port focus engine

Hope this helps.

39fe2de.gif

Posted on Jul 19, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need to know timing mark on tata indica 1.4 please


this is your engine
make sure you replace cam seal and timing cover seal

number one on TDC compression
after fitting new timing belt

turn motor by hand clockwise twice and mack sure the belt tension and timing marks are correct
26214915-wof0kwh1xpwidkmx23mdilgp-4-0.jpg

Jun 08, 2016 | Tata Cars & Trucks

1 Answer

Resetting timing after replacing head gasket


Do you have the timing belt on and the tensioner set correct? If so, just rotate the crankshaft around until the notch on the crank sprocket is lined up with the pointer on the oil puimp housing (TDC). Now the camshaft sprocket's notch or pointer should be at the top and exactly in line with the mark on the rear timing belt cover. If it's not correct, you'll have to release tension on the belt, remove it, and set the camshaft to the mark. But before you do that, turn the crankshaft back (counterclockwise) just three notches. Then you can turn the cam to line up, then return crank to line up, and continue with belt installation, setting the tension, and re-checking timing marks after rotating the crankshaft a couple of revolutions. Once you know the timing is set to TDC, no further timing adjustments are possible, because the computer controls timing. I don't know how important it is, but just to let you know: Chrysler recommends after belt removal or replacement that one perform the "crankshaft and camshaft relearn alignment procedure" using the DRB scan tool (Chrysler's scanner device) or equivalent scan tool.
And the firing order on all four cylinder engines is the same: 1 3 4 2.
I hope this helps you out. Cheers.

May 11, 2012 | 1996 Plymouth Breeze

1 Answer

I REPLACED TIMING BELT .AND I WANT TO KNOW HOW TO RESET THE TIMING ,SO AS NOT TO DAMAGE TO MOTOR. WHEN I GO TO START IT UP .


If you did not set the gears(pulleys) in the same place or set the marks in the timing belt to the marks in the gears the car wont start. when you do the the job is when you set the timing, not after you done. If you use a cheap timing belt those belts do not have marks, I recommend to get a belt from toyota that has a mark for each cam pulley and another mark for the crank pulley. Toyota doesn't have interference engines, so no matter how bad is your timing the car wont start just spin.

Dec 25, 2010 | 1994 Toyota 4Runner

1 Answer

Need too know the timming marks on where to set them at on a 1988 dodge ram 50 2.0 4 cyl


Here are the timing marks for the timing belt and also the balance shaft, when replacing the timing belt you should also replace the balanceshaft belt heres a diagram for both of them good luck and hope this helps.35de2d2.gif9665995.gif

Aug 13, 2010 | 1988 Dodge Ram 50

2 Answers

Marks for 97 toytoa camry


Timing Belt "Marks"?
CLICK on the following LINK. It has the Timing Belt Mark(s) Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!


http://www.2carpros.com/car_repair_information/year/1997/make/toyota/model/camry/1997_toyota_camry_timing_belt_diagram_marks.htm

Feb 27, 2010 | 1997 Toyota Camry

2 Answers

Replace timing belt Holden vectra 2.2ltre.i need to know how to set up the marks


timing cover has marks on it,line it up with pulley,remove pulley and cover,check to see if any marks on camshaft.un do tensioner.to be sure make your own marks

Jan 01, 2010 | 1999 Isuzu Rodeo

2 Answers

Replaced water pump and now i need to know how to reset timing


I hop you are replacing the belt and tensioner/ idler pulleys. the crank pulley has a notch approx 12'oclock. the cams will be marked rear cam "I" and front cam "E" .. put both letters at 12 o clock. there should be a notch at the top of the cover for the cams at 12 o clock. thats all there is to it. to tension the belt, after you have it all timed up. put some tension on it, tighten tensioner bolt, turn the engine 2 revolutions, then double check your marks, push down with you thumb between the cam sprokets with 20 lbs of force, the belt should delfect about 10MM if its too loose, loosen the tensione rbolt an dturn it tighter a little more an dck tension again. If you get it too tight it will whine and wear the cam journals, too loose and timing will not be correct.

Sep 18, 2009 | 2001 Kia Sephia

2 Answers

Opel Corsa timing belt replacement


You need to find the timing marks on both crank and cam pulleys, set it, then take of the belt ane dont let any pulley move! Put on new belt and set the tension of the belt.

Jul 31, 2009 | 2000 Acura Integra

1 Answer

My friend owns a 2003 cadillac cts 3.2 ltr engine. he needs to replace his timing belt because it broke but there are multiple timing marks on the harmonic balancer and 4 marks on the block, so he doesnt...


If the timing belt broke, he should take it to have it replaced because theres more than likely to be bent valves in the head. Heads should be checked before putting another timeing belt on. If there is valve damage, then more than likely there damage to the pistons too.

Dec 13, 2008 | 2003 Cadillac CTS

4 Answers

Timing Belt


I want to know how to set point

Oct 08, 2008 | 1996 Dodge Stratus

Not finding what you are looking for?
1997 Ford Escort Logo

Related Topics:

44 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...