Question about Jeep Grand Cherokee
The Lock Cylinder Switch, on the lock cylinder, is bad or the wire that
goes to it is broken and if its broken it will be in that rubber boot
that goes from the door to the body. You can disarm the alarm by unlocking
one of the other doors or tailgate with the key.
I found other comment about the same problem with one 06 overland, and say...
The way I found that works is to lock all the doors with the remote or the inside button, then pull the plunger up on the drivers door, close the door. Then open the door back up and push the drivers door plunger down. Watch the alarm light if it starts flashing then just open the door again and push the plunger up and then down.... Something like that worked for me, but it does not allow the alarm to set. That may not be the exact method but it is something similar to that, I would check but I don't have the jeep right now.
Hope this help.
Posted on May 04, 2010
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Aug 19, 2013 | 2005 Jeep Grand Cherokee
Oct 31, 2009 | 1995 Jeep Grand Cherokee
Sep 05, 2009 | 1995 Jeep Grand Cherokee
Aug 31, 2009 | 1993 Jeep Grand Cherokee
Jun 29, 2009 | 2000 Jeep Grand Cherokee
Apr 25, 2009 | 1995 Jeep Grand Cherokee
Apr 16, 2009 | 1995 Jeep Grand Cherokee
22 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: