Question about 2003 Hyundai Accent
It can be almost anything take your car to auto-zone and have them read the code for you they will do it for free.
Posted on May 04, 2010
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
i just replaced the timing belt, and asked the garage to look at the transmission for me because i thought i was experiencing some subtle shifting problems. they told me the transmission looked fine, but i needed a new filter and fluid. the engine light didnt turn on til a couple weeks later tho. does this sound like a new filter and fluid would fix this problem?
Posted on Sep 09, 2008
Check the coolant level, do this with a cold engine. Or if you have recently used it. let it cool down for about 25 minutes before removing the radiator cap. if it is low, refill with coolant. If it does not, check your thermostat. Or better yet replace your thermostat. Be sure to get the right one . the same degrees as your old one. Just ask the teller to give you one for your engine size and car Model.And year.See where the radiator cap is. Then drain some coolant to where it will not spill from the radiator cap. Remove the hose nearest the radiator cap and you will get to the thermostat housing. Remove the housing and note how the thermostat is placed. Take of the thermostat housing and the old thermostat. Clean the housing and around the hole where the thermostat goes of any deposits. Get some grease and cover the new gasket with grease on the housing to hold it in place. replace the New thermostat and make sure it is flush with the engine and the housing. If it is off , you could break the housing upon tightening the housing.replace the hose and refill with coolant slowly to eliminate any air spaces.. Also check the coolant reservoir and fill it to the indicator line. Restart the car and chek for any leaks. Then check the heater after the engine heats up. If that does not do the job it could be the temperature sensor or the heater core.The heater core will take more time to check and clean or replace.
Posted on Nov 26, 2008
Most of the time they mean:
p0441 = Evaporative Emission System Incorrect Purge Flow
p0422 = Evaporative Emission Control System Leak Detected (small leak)
MOre info at http://www.obd-codes.com/p0442
Posted on Jan 10, 2010
Did you use a aftermarket O2 sensor or a genuine Hyundai one? If it's an aftermarket one it may be bad or not as good as the OEM one. See here for more details and other potential causes: P0133
Posted on Feb 11, 2010
Tips for a great answer:
Jul 17, 2015 | 2003 Hyundai Accent
Oct 19, 2014 | 2003 Hyundai Accent
Jan 24, 2013 | 2003 Hyundai Accent
Nov 04, 2010 | 2003 Hyundai Accent
Apr 06, 2010 | 2003 Hyundai Accent
Oct 03, 2009 | 2003 Hyundai Accent
Sep 06, 2009 | 2003 Hyundai Accent
Jun 17, 2009 | 2003 Hyundai Accent
243 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: