Question about 1983 Chevrolet Malibu

1 Answer

I have 70 malabu with the 250 6 cyl. i need to

I have 70 malabu with the 250 6 cyl. i need to replace the balancer i see no bolt holding the balancer on how do i reinstall it?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 409 Answers

You have to start it on the crank snout and drive it on with a hammer and a block of wood.

Posted on May 05, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have 1997 F-250 4.9L 6cyl reluctor wheel pulse ring which is cracked. I need the part number? Fitted behind to Dorman 594-391 harmonic balancer/damper w/ 3 bolts.Ring is aluminum cast w/ 3 points.


Ford Part No.: F2LZ-12A227-BB
https://www.fordpartsgiant.com/parts/ford-ring_f2lz-12a227-bb.html?Make=Ford&Model=F250&Year=1997&Submodel=&Filter=(e=8-cyl-4-6l;t=4at-4r70w)&Location=crankshaft-pistons-bearings,,12A227

Jan 28, 2017 | Ford F-250 Cars & Trucks

1 Answer

1997 f-250 7.5l harmonic balancer removal how do you remove it


no set bolt you will need a harmonic balancer puller some truck take a special puller

Jan 05, 2016 | Cars & Trucks

1 Answer

What is the torque spec for a 2003 jeep wrangler 2.4 connecting rods


  • ENGINE 2.4L

DESCRIPTION

N·m

Ft. Lbs.

In. Lbs.

Balance Shaft Carrier to Block-Bolts

54

40

-

Balance Shaft Gear Cover-Double Ended Fastener

12

-

105

Balance Shaft Sprocket- Bolt

28

-

250

Balance Shaft Chain Tensioner-Bolts

12

-

105

Balance Shaft Carrier Cover-Bolts

12

-

105

Camshaft Sprocket-Bolt

101

75

-

Connecting Rod Cap-Bolts

54 +1/4 turn

40 +1/4 turn

-

Crankshaft Main Bearing Cap/Bedplate - M8 Bolts

34

250

-

M11 Bolts

41 +1/4 Turn

30 +1/4 Turn

-

Crankshaft Damper

136

100

-

Cylinder Head Cover- Bolts

12

-

105

Flex Plate to Crankshaft

95

70

-

Flywheel Mounting Bolts

81

60

-

Engine Mount Bracket Right-Bolts

61

45

-

Exhaust Manifold to Cylinder Head-Bolts

23

-

200

Exhaust Manifold Heat Shield-Bolts

12

-

105

Intake Manifold - Lower -Bolts

28

-

250

Oil Filter

20

15

-

Oil Pan-Bolts

12

-

105

Oil Pan Drain-Plug

27

20

-

Oil Pump to Block-Bolts

28

-

250

Oil Pump Cover Plate-Bolts

12

-

105

Oil Pump Pick-up Tube-Bolt

28

20

-

Oil Pump Relief Valve-Cap

41

30

-

Spark Plugs

28

Timing Belt Covers - Front Covers to Rear Cover-Bolts

12

-

105

- Rear Cover-Bolts

12

-

105

Timing Belt Tensioner Assembly-Bolts

61

45

-

Sep 27, 2014 | Cars & Trucks

1 Answer

How do i remove harmonic balancer & replace


YOU NEED A HARMONIC BALANCER PULLER TOOL AND A 15M SIX POINT SOCKET TO REMOVE HARMONIC BALANCER BOLT.TURN OFF RADIO AND REMOVE THE DRIVE BELT AND REMOVE THE NEGATIVE BATTERY CABLE. REMOVE THE STARTER SO YOU CAN PUT A LARGE SCREW DRIVER OR LARGE PUNCH TO STICK IN ONE OF THE FLY WHEEL HOLES TO KEEP ENGINE FROM TURNING WHEN YOU LOOSEN THE HARMONIC BALANCE BOLT. ALSO SCREW DRIVER AND PUNCH CAN KEEP ENGINE FROM TURNING WHEN REMOVER THE HARMONIC BALANCER. YOU WILL NEED A HELPER TO HOLD PUNCH OR SCREW DRIVER WHILE YOU LOOSEN THE BOLT. YOU CAN GO TO SEARS OR ANY AUTO PARTS STORE AND BUY HARMONIC BALANCER PULLER.TORQUE HARMONIC BALANCER BOLT TO 76 FT LBS.

Apr 23, 2011 | 2003 Pontiac Montana

1 Answer

1996 Subaru Legacy. Two belts, one goes to power


I assume you got this fixed by now? To tighten the harmonic balancer, this is the way I do it: under the intake manifold towd the back of the engine there is a black plug or a hole where a black plug used to be that is an access window to the torque converter bolts. Rotate the crank over with a breaker bar and socket until you see a hole through the flywheel, this is where i wedge a large screwdriver into to hold the crank in place and tighten the balancer bolt with a breaker bar and socket. If you do have a torque wrench the spec is 70-80 ft-lbs on the 2.2 and 90-100 on the 2.5 model

Jul 18, 2010 | 1996 Subaru Legacy

1 Answer

I have a ford f-250 with 460 engine. 1983 model and have to replace the front crank seal. how much trouble is it?I already have the radiator off and replacing it.


You'll need to remove the crankshaft pulley and the harmonic balancer, which you'll need a harmonic balancer removal tool. The center bolt is usually on really tight. You can use a seal puller to remove the crankshaft seal from the timing cover.

Apr 24, 2010 | 1983 Ford F 250

1 Answer

How to replace harmonic balancer 1993 2.8L chevy s10 6 cyl


drain radiator and remove, remove all belts, remove outer pulleys from balancer then remove big center bolt from balancer ,make sure you use puller made to remove the balancer you can rent them at your local auto zone 

Mar 07, 2010 | 1993 Chevrolet S-10

1 Answer

Replacing the harmonic balancer in ford bronco 1985 how do i replcace it


First remove radiator fan shrould.This will give you access to the fan.Remove fan and fan belts.Remove bolt on harmonic balancer.You will need to rent a balancer remover and installer kit.Most big auto parts chains will rent these kits to you.Next remove four bolts holding pulley to balancer.Next attach balancer puller to balancer with long bolts from kit.Using a 1\2 drive breaker bar,remove balancer from engine.After removing balancer replace front seal.Lubricate hub on new balancer with engine oil.Then use installation tool from kit to install balancer.Never try to beat balancer on with hammer,engine damage could occur.Then work in reverse to replace remaining parts.Hope this will help you.

Aug 03, 2009 | Ford Bronco Cars & Trucks

1 Answer

I broke timing belt when replacing hormonic balancer


Here are some. Hope it helps =D

Timing Marks

Diagram


TORQUE SPECIFICATIONS
Application Ft. Lbs. (N.m)
A/C Compressor Bracket Bolt 37 (50)
Alternator Bracket Adjuster Bolt 16 (22)
Alternator Bracket Bolt 33 (45)
Balance Shaft Pulley Bolt 22 (30)
Camshaft Pulley Bolt
2.2L DOHC 37 (51)
2.2L SOHC & 2.3L 27 (37)
Crankshaft Pulley Bolt 184 (250)
Power Steering Belt Adjuster Nut 11 (15)
Power Steering Pump Bracket Bolt 33 (45)
Power Steering Pump Mounting Bolt 16 (22)
Shift Cable Bracket Bolt 16 (22)
Timing Belt Tension Adjuster 33 (45)
INCH Lbs. (N.m)
Timing Belt Cover Bolt 108 (12)
Valve Cover Nut 90 (10)
Water Pump Bolt 108 (12)

Jun 28, 2009 | 1992 Honda Accord

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

47 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...