Question about Buick Rendezvous

2 Answers

How do you replace the front wheel bearrings on a 2002 buick rendezvous?

Posted by on

  • 1 more comment 
  • cody314 May 04, 2010

    Alright did not know if it was same as how to do rear on a bmw or not.

  • cody314 May 04, 2010

    So then front should be way easier then rear on a bmw?

  • cody314 May 04, 2010

    Thank you

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,016 Answers

Hi,

First you will need to jack the front of the vehicle up. Put axle stands underneath on the chassis rails.

1. Remove wheel, disc brake caliper.
2. Remove the centre nut holding the front drive axle in place.
3. Drop out the steering rod arm, top and bottom arm ball joints.
4. you should be able to remove the whole stub axle assembly.
5. You will now have to get the old bearings pressed out or if you have the removal tool to do it then thats what you will need to do.
6. Fit the new shaft seal, and bearing assembly which will have to also be press fitted in.

Assembly of the hub and disc is reversal of the removal procedure. Do the same with the other side if you are replacing both sides, which you should actually do as chances are it won't be too long before that one will need to be done also.

Hope this helps, let me know if you need further help.

Jason

Posted on May 04, 2010

  • Jason Maurirere
    Jason Maurirere May 04, 2010

    Yeah,



    You just have to get the bearing pressed out and then back in again.

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,427 Answers

Hmm ok i hope you can follow the instructions and have a basic understanding of cars,,,


  • jack up car
  • remove front wheel..
  • remove caliper *the brake)
  • remove rotor (the circular thing)
  • now,,, take it to a machine shop and have the wheel beering pressed out,, the wheel beering is inside the rotor...,, press new beering in and reassemble..

Dont worry its easy and i guess u know about cars and have tools..

Posted on May 04, 2010

  • Rishi Roshan Ali May 04, 2010

    ahh rear brakes are shoes in some cass and the dismantling is different,,, in any case the rotor has to be removed and the bearing is insde the rotor..

  • Rishi Roshan Ali May 05, 2010

    hell easier !!! yes!

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

WHEEL BEARING REPLACED NOW THE AWD AND ATL LOCK LIGHT ARE ON AND MY CAR WONT GET PAST 30MPH, IF I TRY TOO FAST


Buick Rendezvous Service Traction system and Anti-Lock warning ...

forums.edmunds.com > Buick > Buick Rendezvous
Jul 15, 2007 - 31 posts - ‎19 authors See Also: Buick Rendezvous FIX Trac Off ABS warning light DTC sensor hub wheel.... For the service traction,ABS,AWD lights it may be a wheel speed sensor (also .... I drive a 2004 Buick Rendezvous with about 120K miles.Missing: atl

Sep 12, 2015 | 2004 Buick Rendezvous

1 Answer

Awd driver front wheel shakes t 70 mph (buick rendezvous)


sounds to me like you need a front hub assembly, but you could also have a severely
bent rim

Oct 15, 2014 | 2002 Buick Rendezvous

1 Answer

What is the versa track awd located at in a 2002 Buick Rendezvous all wheel drive


the versa trac awd is located under your vehicle.. it is not one part.. it is many parts that all work together to turn all 4 wheels..it starts at the front wheels and runs all the way back.

Sep 22, 2014 | 2002 Buick Rendezvous

1 Answer

Should the entire bracket that holds the wheel bearing be replaced. drobert8. Buick Rendezvous 2002


The front wheel bearing for your Buick is an integrated wheel hub/bearing/ABS.
Yes, the whole thing gets replaced. It should look like the one off my Bonneville; Bearing.

Remove wheel/tire. Remove brakes. Remove rotor. Remove axle nut. Press-out axle shaft. Unplug ABS connector. Remove 3 bearing bolts.
Don't forget to put the heat sheild back on during reassembly, and the axle nut need to be very tight.

zeevert_62.jpg

Apr 13, 2011 | Buick Rendezvous Cars & Trucks

1 Answer

Rear abs antilock brakes. Have replaced front


if you have rear abs then yes. you may have pinched the cabl attached to the wheel bearing

Jun 16, 2009 | 2002 Buick Rendezvous

3 Answers

Buick rendevousz headaches


I own the 2002 Buick Rendezvous CX and I've encountered the same problems listed here. The ABS / Traction Control Lamp stays on and was throwing a code for the left wheel speed sensor as well as an anti-lock brake code (both in the wheel bearing hub assembly). I replaced the left and right front wheel hub assembly yet this did not eliminate the abs codes. 
Ultimately, I traced this problem to a break in the wire that leads to the left hub assembly. Although the sensor was properly connected, the wire (which is encased in a plastic housing) was broken. This is the wiring which leads from the abs wiring harness under the hood down to the left wheel abs sensor. 
I would suggest that you simply remove the left wheel and inspect the wire that leads to the abs sensor (there is only one wire on each wheel). Mine literally fell apart when I removed the plastic housing around the wire. I spliced the wire together and put it back in the plastic housing. After this, my abs codes disappeared and my anti-lock brakes began working again!
This is a simple fix that many people spend $1000 + on by replacing the hub assembly which does not fix the problem.

Aug 20, 2008 | 2002 Buick Rendezvous

2 Answers

My anti-lock brakes keep kicking on when i was driving last night then the light turned on and the awd disable light when on.


are awd light came on a few day ago...no change in the driving behavior. just had two wheel bearings replace last year. any idea what the awd disable light means now?

Thanks,
jim

Jul 31, 2008 | 2003 Buick Rendezvous

3 Answers

All wheel drive fault light stays on the dic


Try undoing the negative battery cable, count to 25 and hook it back up, this should reset the brain in your computer system for your vehicle.

blessings

Jun 19, 2008 | 2002 Buick Rendezvous

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...