Question about Chevrolet Astro

1 Answer

I CHANGED THE INGNITON COIL,SPARK PLUGS AND SPARK PLUG WIRES,AND THE CRANK SHAFT SENSOR THE VAN STILL WOULDN'T SATRT

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,317 Answers

I would check the ignition control module. Auto Zone can test the ignition control module. Also, you might want to check the camshaft sensor. I would check all your connections. Also check the ignition fuses.

Posted on May 04, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Have an 04 ford freestar 3.9l. Cranks but wit start just changed out spark plugs and wires coil ignition pack and the crank shaft sensor.


Did the engine work fine before you made those changes? Or did you make the changes because of a problem? If yes to the latter question -- what was the problem you were trying to fix?

Jul 13, 2014 | Cars & Trucks

1 Answer

I was driving when my 1997 dodge intrepid 3.5 shut off and wouldn't restart and still won't restart , i looked it over and determine i wasn't getting no spark so i changed the plugs , plu


It could be the computer. It could be a relay or something in the wiring harness too.
You would need a shop manual to get the wiring diagrams and test procedures to find the problem.
You need to know if the coil assembly and injectors are getting power from the ASD relay, and if the computer is getting signals from the cam and crank sensors.

Jan 23, 2013 | 1997 Dodge Intrepid

1 Answer

My mpv wont turn over no spark


If the van was running before you changed the wires, I don't see how it is not firing the plugs now unless you got the wrong wires and they are not making contact with the coil towers and the plugs.
If there is no spark on any of the wires, something happened to the coil pack or the crank/cam sensors. Or a fuse or relay for the coil pack.
I would probably try an old plug wire to make sure, then check the coil for voltage.

Jul 21, 2012 | 2000 Mazda MPV

3 Answers

My 2005 dodge neon sxt wont start, no spark, changed cam shaft sensor, coil is good, cant find the crankshaft sensor, also wondered if it could be the timing belt, what do you think?


the crank sensor is on the back side of the engine just above the oil pan there will be two sensors there one is the crank sensor and the other is oil presser sensor. All so check the wires from the crank sensor to the cam sensor. If you think it is the timing belt pull the cover and check it. hope this helps.

May 22, 2012 | 2005 Dodge Neon SXT

1 Answer

Car wont start, changed the spark plugs and wires, but still wont start up


check coils for spark if you have spark comming form all the wires and coils etc and then check for fuel and if you have these all working and still no start it could be a sensor either a cam or crank shaft sensor depending on the motor config

May 05, 2010 | 1999 Pontiac Grand Am GT

5 Answers

I have a 1996 GMC yukon with 5.7 engine it is not firing I have changed the coil this did not fix problem what do I check next


Check for injector pulse if no pulse with no spark check ignition module in distributor or crank sensor.

Nov 11, 2009 | 1996 GMC Yukon

1 Answer

TWO DAYS AGO 94 RANGER (4 CYL) SOHC...STOPPED ON ROAD. CRANKS BUT DOES NOT START. HAS FUEL PRESSURE. CHANGED FUEL FILTER. CHANGED AIR FILTER. CHANGED ONE OF THE DISTRIBUTOR COILS...TWO SPARK WIRES WERE NOT...


If all the coils are giving spark now,then you moat likely have gas fouled plugs now,so change them out with new ones,all 8 of them.If you do not have spark on all plug wires,pull the timing belt cover,and align the cam shaft and the cam,to see if the belt has jumped.If It hasn`t,replace the crankshaft sensor.

Oct 17, 2009 | 1994 Ford Ranger Supercab

1 Answer

VAN WILL NOT START


does it have spark could be a crank sensor or coil pack

Sep 18, 2009 | 1998 Chevrolet C1500

2 Answers

2003 pt cruiser sensors


check the battery and make sure it has a fully charge,also check to make sure the start motor pinion is not jammed in the flywheel, and check the coil pack to make sure have spark.also check the crank sensor

Feb 14, 2009 | 2003 Chrysler PT Cruiser

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6918 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...