Question about 2003 Ford Taurus

1 Answer

Where is the starter located on a 2003 Ford Taurus 3.0 sohc

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 196 Answers

The starter is bolted to the transmission by the radiator down bottom 2 bolts 2 wires and a plug lay on the ground about midway of the front end of the car and look -up the big round thing with the wires going to it bolted to the transmission it easy you can do it hope this helps

Posted on May 04, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need to replace the existing starter in my 2003 Ford Taurus wagon. I know that I have to jack the car up in order to remove the old starter. What I don't know, is how many bolts need to be removed...


Because of the Variety of mounting methods there are 2 to 4 bolts that should be visible as you look at the starter itself. Not counting the wiring connections. If this a sideways mounted motor with the Starter mounted on the front of the motor there will be 2 bolts holding it in place. If the motor is mounted regularly with the transmission extending under the vehicle the starter in on the rear of the motor near the firewall and will have up to 4 bolts holding it in place but most likely no more than 3. I would recommend getting a Haynes repair manual on the vehicle for more detailed instruction on removal and installation. This manual or a Chilton's manual are both available at the major Auto Parts stores and are fairly inexpensive.

Aug 28, 2010 | 2003 Ford Taurus

1 Answer

Where is the starter of a 2003 taurus located?


it should be either down on the left or right lower sides of the engine, it will have the positive battery lead running to it

Jun 12, 2010 | 2003 Ford Taurus

1 Answer

How difficult is replacing a starter on the 2003 ford taurus


Difficulty is dependant on the following factors. 1) your experience 2) the location of the car when work is done e.g. yard/shop 3) whether you can LIFT the car, (as the starter will come out the bottom of the engine compartment). 4) what tools you have available and finally how motivated you are to complete the work. Step by step instructions can be obtained here.

Mar 22, 2010 | 2003 Ford Taurus

1 Answer

What is the going charge to replace the starter in a 2003 ford ta


depending on the quality of starter, the price could range from $150.00 to $300.00

Oct 19, 2009 | 2003 Ford Taurus

2 Answers

The car will not start .


try the solenoid first.

Starter Motor —3.0L (4V) Removal
syh~us~en~file=ani_caut.gif~gen~ref.gif WARNING: When repairing the starter motor (11002) or working underhood in the vicinity of the starter motor, note the heavy gauge input lead connected to the starter solenoid (11390) is hot at all times. Make sure the protective cap is installed over the terminal and is reinstalled after repairing.
  1. Disconnect the battery ground cable. For additional information, refer to Section 414-01 .
  1. Raise and support the vehicle. For additional information, refer to Section 100-02 .
  1. Remove the bolts, pin-type retainers and the front splash shield.
  1. Remove the starter solenoid terminal cover.
  1. Remove the nuts and position the starter solenoid cables aside.
  1. Remove the nut and position the starter motor ground strap aside.
  1. Remove the upper starter motor nut and stud.
  1. Remove the bolt and the starter motor.
--------------------------------------------------------------------------------------------------
80dbb8c.gif

Oct 03, 2009 | 2000 Ford Taurus

2 Answers

How to find out how many valves a 1999 3.0 V6 Ford Taurus has ? Need to know cause it needs a new starter


The two have nothing to do with each other. You just get a starter for a 99 Taurus with a 3 litre engine.

Jun 17, 2009 | 1999 Ford Taurus

1 Answer

I need to replace the starter solenoid on a 2003 ford taurus


The starter solenoid is attached to the starter unlike the older Fords. You will have to remove the splash guard to gain access to the starter. It is located on the front side of the motor.

Jun 07, 2009 | 2003 Ford Taurus

Not finding what you are looking for?
2003 Ford Taurus Logo

Related Topics:

273 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...