Question about 1992 Ford F150 SuperCab

1 Answer

I have a F150 and I replace the fuel pump, Sending

I have a 1992 F150, 5.0L and I replace the fuel pump, Sending Unit and the float... I had to cut off the factory connector and splice the connector that came with the Spectra assembly... I removed one lead at time and connected it before I cut another.... however, it is obvious that something is wired wrong because the pump dose not work and the fuel gauge is always show ing full.

What is the best way to correct this.... PLZ

Posted by on

  • gapent May 05, 2010

    If I could afford the OEM I would have preferred to not cut the darn thing... but since I dont have $480 to spend I has to get one for $260... does that make sense?

    Now, can eny one help me work with I have... please!

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 6,826 Answers

Put the old connector back on,and get the oem pump that installs without cutting and splicing

Posted on May 04, 2010

  • Ronny Bennett Sr.
    Ronny Bennett Sr. May 05, 2010

    napa will have a oem pump,that is affordable.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fuel gauge malfunction fixes on a 2003 ford explorer?


The fuel level sending unit is integrated in the fuel pump, which is located in the tank. The age of your vehicle warrants replacement of the fuel pump as a unit. Never try to repair a sending unit Just make sure the float for the sending unit is free to swing when installing the fuel pump into the tank. Also empty water out of fuel pump well of the fuel tank

Jun 12, 2017 | Ford Cars & Trucks

1 Answer

Fuel sending unit test and replace


Checking and replacing a fuel sender unit ' How a Car Works

www.howacarworks.com/fuel.../checking-and-replacing-a-fuel-sender-u...
Learn how to check and replace a fuel gauge sender unit, and how to check a fueltank. ... Fuel pipe Sender lead Breather pipe Sender unit Petrol tank Filter Float arm Float Mounting flange Filler .... Test by quickly removing the filler cap.

How to test a Fuel Sender - YouTube

? 2:01
https://www.youtube.com/watch?v=hHzeOOzQKR8
Dec 1, 2012 - Uploaded by TheyMightBeRacing
This video shows the basics of how to test a fuel sender to ensure that it is ... Trailblazer fuel gauge not working/sending unit test and replace ...

Trailblazer fuel gauge not working/sending unit test and ...

? 17:29
https://www.youtube.com/watch?v=aIMDauRGwFg
Sep 23, 2012 - Uploaded by MAY03LT
How to replace the fuel sending unit in the 02-03 Trailblazers. I also show how the fuel gauge works and how ...

Toyota Corolla Fuel Pump Removal Sending Unit Testing ...

? 6:17
https://www.youtube.com/watch?v=JtYMRrUpZr0
Oct 29, 2014 - Uploaded by richpin06a
Toyota Corolla Fuel Pump Removal Sending Unit Testing. ...Camry 1997 1998 1999 2000 2001 fuel pump replacement - Duration: 9:32.


Jan 13, 2016 | Cars & Trucks

1 Answer

2005 Lincoln Navigator fuel indicator quit working.


float and sending unit in fuel tank has gone bad or stuck..you may have just overfilled the tank. Wait and see if it corrects itself., or You will have to replace pump float and sending unit..as it all is one complete unit. It is located inside the fuel tank and you will have to have the tank drained, removed to gain access to the pump float sending unit. check your gauge fuses also

Feb 13, 2015 | 2005 Lincoln Navigator

1 Answer

1996 ford f150 front gas tank gauge reads empty but tank is full pump in front tank was replaced about a year ago what could problem be


When pump was replaced, did you also replace sending unit? It is usually a good idea to replace sending unit when replacing pump. The sending unit also "sends" information about the fuel level to your fuel gage. It is also possible the float on the sending unit is stuck in the low fuel or empty position on the sending unit. Although on some vehicles you can replace individual parts of the fuel delivery system, it is usually a good idea to replace all the internal parts of the sending unit assembly at the same time. After all, most fuel tanks can be a real pain to gain access to the inner workings of the fuel delivery system, so why take the chance of having to gain access again.
Good luck.

Jul 23, 2012 | 2005 Buick Terraza

1 Answer

After refuelling the fuel gauge will stay on empty on BMW 3 series


fuel sending float stuck. or it floats and the fuel sending unit----a resistor set up, is shorted. it's in the gas tank, remove rear seat and you'll see the fuel pump gasket. The fuel pump and sending unit are as one as you pull the assembly out.

Jun 19, 2010 | 1994 BMW 3 Series

3 Answers

2007 Forrester- gas tank over half full but while driving the gauge on the instrument panel suddenly moved to empty- when I filled up the car it only took 6 gallons. What is happening?


The fuel sending unit is most likely the problem,some units only can be replaced with the fuel pump ,as a whole unit.Some are available as just a sending unit alone.

Dec 30, 2009 | Subaru Forester Cars & Trucks

1 Answer

Do I require the fuel tank sending unit wrench number 310-123 in order to remove/install the fuel pump sending unit on a 2002 F150. Can a brass (non-sparking) punch be used instead? If the wrench is a...


i fixed my windstar fuel pump problem.. fuse number 5 was blown.. replaced the fuse and all is better.. however i do hear an electrical spark when the fuel pump disengages .. (turning the key to the acc position)

Dec 29, 2009 | 2004 Ford F150

1 Answer

Fuel gauge quit working. stuck on half a tank. is there a fuse for just the gauge? do fuel tanks even have floats in them anymore?vor do i just need a new gauge?


the fuel level sending unit has been incorporated into the fuel pump assembly.
the fuel pump is most likely your problem, these pumps dont like fuel additives so be careful.
most common problem with these fuel gauges is the sending unit, the sender contacts will errode over time fuel additives seem to speed the process.

replace the fuel pump assembly

hope this helps

Jun 14, 2009 | 2002 Ford F150 Regular Cab

2 Answers

Fuel gauge doesn't work


u may have bent the fuel level sending unit arm os did not seat the fuel pump in place properly

Dec 20, 2008 | 2002 Buick Rendezvous

Not finding what you are looking for?
1992 Ford F150 SuperCab Logo

183 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5470 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...