Question about 2000 Dodge Grand Caravan
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Yes it is all one unit, and yes that is what the problem is. don't use aftermarket parts, use OEM, (Delco Remy) they are much better quality.
Posted on Sep 08, 2008
Gm has a real problem with fuel tank sending units. That is what is wrong. You need a fuel tank sending unit. You can only get them aftermarket with the whole fuel pump module, but you can buy them seperate if you buy it from the dealer.
Posted on Mar 08, 2009
yes it will swap and you have to remove it from the bottom of the van remove the screw/clips from inside the filler door and then from underneth disconect the filler tube ti tank and the vent hose to the tank i belive there is a bracket also holding the filler tube to the body with one bolt then it snakes out of the va r insalating is just reverse
Posted on Jun 25, 2009
You don;t say whether the fuel gauge is reading accurately, or whether it's always on empty. If the gauge is always showing empty, it's most likely a problem with the sending unit in the fuel tank. Check the resistance across the two terminals of the sending unit.
On a C900, the fuel sender level unit is separate from the fuel pump and located on the right side top of the tank, accessible by removing the trunk floor lift up panel (the pump is located on the left side top of the tank.
Possible problems are: electrical line off or broken, float not working (it's fairly delicate); or gauge not working.
Test the resistance of the sending unit with the lines disconnected, the resistance should be 2.6 to 3.8 ohms full tank, 63.3 to 67.5 ohms empty tank; and test for voltage across the top of the sender unit, if no voltage, that's likely the problem!
If the gauge is otherwise reading accurately (showing 'full' for a full tank, etc) then the problem is likely a gauge malfunction and can be simply replaced.
Posted on Aug 09, 2009
Bad fuel level sensor. Unfortunately it is located inside the gas tank. Fairly common problem on GM's. Due to sulphur in fuel. Corrodes the sensor tabs. Expensive to have repalced and NOT a do-it-yourself project, unless you have dropped a tank before.
Posted on Nov 03, 2009
Tips for a great answer:
Jul 02, 2014 | 2002 Volkswagen Jetta TDI
Dec 01, 2010 | 2000 Dodge Grand Caravan
Aug 26, 2009 | 2000 Dodge Grand Caravan
Aug 16, 2009 | 2000 Dodge Grand Caravan
Jul 29, 2009 | 1994 Dodge Grand Caravan
Jul 01, 2009 | 1998 Pontiac Grand Prix
Jun 12, 2009 | 2000 Chevrolet Silverado 2500
52 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: