Question about 1985 Ford Ranger

2 Answers

It will not start with key i have to jump across silinoid i have puy in a new starter bat and silinoid

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 721 Answers

Put an ignition switch in it,not the lock cylinder,but the switch.

Posted on May 04, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 6,826 Answers

When turn the key to start,check to see if there is voltage to the small wire to the solenoid,if not,check the neutral safety switch,and then,the ignition switch.

Posted on May 04, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Will not start or click when hitting the ignition switch. have replaced the starter, charged the battery and cleaned the battery terminals


Use voltmeter or test lamp to see if you are getting power to ignition switch. Could be blown fusible link or bad switch.

Apr 21, 2016 | Cars & Trucks

2 Answers

Starter is clicking changed the starter and the battery is charged still clicking when i turn the key.


Try jumping it, battery may need an extra boost to kick over and get the alternator going.

May 04, 2015 | 1987 Nissan Pickup

1 Answer

What else can be the reason this 2000 Dodge Caravan won't turn over by turning the key while in park.


have you checked the ignition switch thats on the steering column shaft, when you turn the key it moves a rod that moves positions on the switch.

Mar 12, 2015 | Dodge Cars & Trucks

1 Answer

Starter issues


Try and lightly tap your starter with a hamer if the truck starts when you do that then it's starter if you turn key on and try to turn over and it doesn't it could be your ac cluch or it could be silinoide
side of frame when you pop hood

Mar 20, 2014 | 2003 GMC Sierra 2500HD

4 Answers

I have a 1976 gmc pickup that i can not get to start. I have replaced the ignition switch and the key switch. I had the starter checked and it is okay. There does not appear to be any power to the starter....


you need to check the ign wire to the starter for power. check wire under dash for power and if you have to run a new wire from ign switch to starter selonoid. switch is on top of steering column under dash.

Jan 29, 2011 | Chevrolet 1500 Cars & Trucks

1 Answer

Military here and working on a foreign car and not a hummer haha. have a 1998 montero sport. bad starter, replaced and now can arc silinoid to fire starter which would only spark before i replaced but will...


Check the condition of the power and ground cables, Bypass the cables with a set of jumper cables, connect the NEG post to the engine with the black cable, and POS to the Starter Solenoid with the red cable. then try it if it starts the cables are bad or poorly connected.

check the battery voltage in stand by and cranking, try jump starting the truck. if the truck will start with a jump the battery could be bad.
If the starter solenoid is separate from the starter then it is possible the solenoid is bad.

Hope this is of some help.
Ed

May 08, 2009 | 1998 Mitsubishi Montero Sport

1 Answer

Will not turn over with new batterie


check battery voatage with a volt meter. After verifying 12v or better at starter, check power at starter cable terminal and verify ground at block is good. Then put volt meter across both battery terminals and try to start car. If battery voltage shows 9.5 or less while attempting to crank, change starter.
(make sure that there is 12v at the starter trigger wire with key in "start" before replacng)
(By battery "hot" you mean it's charged, not getting hot, correct?)

Apr 30, 2009 | 2004 Jeep Liberty

2 Answers

89 wrangler


there should be a sloenoid on the firewall it could be bad

Aug 26, 2008 | 1989 Jeep Wrangler

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

139 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...