Question about 2004 Chevrolet Cavalier

1 Answer

PVC joint how to replace a PVC joint

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 82 Answers

Well to start with it is a CV (constant velocity) joint.
You might have the option if the joint is not "OUT" of installing a new boot on the joint without removing it from the vehicle.
If it is out the you have to remove the tire from the side that is out.
Take off the nut that is on the end of the axle.
Then remove the spindle from the lower a frame.
Pull the spindle off the outer splines of the axle shaft
Then with a bar pop the old one out of the transmission and reverse the procedure it go back together. Make sure you get the axle popped back in the transmission.
"Make sure you get the correct replacement axle"

Posted on May 04, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Citro?n Picasso C3 washer bottle leaking


Did it freeze? If not most likely a bad joint to the pvc tubes.

Seems to be a known problem. Look at the Video tab as well.



Picasso C3 washer bottle Google Search

Mar 17, 2017 | Cars & Trucks

1 Answer

Engine light lit ... pvc valve issue?


REMOVE PVC VALVE WITH VACUUM HOSE STILL ATTACHED CHECK FOR VACUUM AT PVC VALVE PLACING FINGER OVER IT.IF NO VACUUM FROM PVC VALVE BUT THE HOSE TO PVC VALVE HAS VACUUM REPLACE PVC VALVE.IF NO VACUUM GETTING THROUGH PVC HOSE AND VALVE.LOOK FOR DISCONNECTED BROKEN VACUUM HOSE OR OBSTRUCTION IN VACUUM HOSE BLOCKING OFF VACUUM.

Aug 05, 2010 | 2008 Chevrolet Suburban

1 Answer

Noisy when de excelarating


yes thats whats clunking

Apr 15, 2010 | 2003 Saturn VUE

1 Answer

How can I identifies the PCV valve in the motor, where is ti??? and how can I chenge it???


The pvc valve will be located on the valve cover. Or better yet will be inserted into the valve cover. Follow the hoses coming from your air cleaner ( air filter) to the one that goes to your valve cover. Your pvc valve will be at the end of the hose. pvc valve can be tested by pulling it out of the valve cover while still attached to the hose. Start the engine. Place your finger over the pvc valve and pug it with your finger. If you feel vacume then it is working properly. If no vacume is present. Replace pvc valve

Mar 25, 2010 | 2005 Jeep Liberty

1 Answer

Hello, My Monte Carlo will not stay running. I


Its called a pcv valve (positive crankcase valve) what year monte? The valve is for emissions you wont damage the engine but you will notice it idles higher and goes through more gas. you really need to get to the route of the problem. look for broken vaccum lines, engine light( is it on while car is running) the more you can find out the better you'll do getting to the bottom of it.

Apr 25, 2009 | 1998 Chevrolet Monte Carlo

1 Answer

My Monte Carlo will not start. I thought the


change fuel filter replace spark plugs and wires.if that dont help check fuel pump pressure it should be 41 -47 psi.

Apr 25, 2009 | 1998 Chevrolet Monte Carlo

1 Answer

2002 saturn sl1 pcv valve


The PVC valve is located in the valve cover (top "cover" of the engine, near the oil filler cap) On DOHCs, it is immediatly to the right. On SOHCs, it a few inches to the left.The PVC valve is held to the valve cover with a rubber grommet type seat.

1. Remove the hose that connectes the throttle body unit to the PVC valve.
2. Using your hands, remove the PVC valve from the rubber seat. Wiggle it back and forth, then pull it straight out.
3. You can either clean this with carb cleaner, or simply replace it with a new one (<$5 at most auto stores)
4. Put the PVC valve back into the rubber seat and replace the hose

Apr 08, 2009 | Saturn Vue Cars & Trucks

1 Answer

I can hear a thopping sound underneath the front r-side


Yes this is the CV ( Constant velocity Joint) you will need to replace it as soon as you can, it will not fall off you will be ok to use for a few hundred miles.
hope this helps
simfea@telus.net

Jan 13, 2009 | 1993 Dodge Caravan

1 Answer

Replacing the PVC trap and hose on my 2001 Volvo S40


go to your dealership and buy the parts and they will give u a picture on how to replace it.

Dec 19, 2008 | 2001 Volvo S40

1 Answer

A popping sound in left front of vehicle


if noise is heard when taking off from stop turning wheel sharp right or left replace axle.What ever side noise is coming from.

Nov 22, 2008 | 1996 Mazda 626

Not finding what you are looking for?
2004 Chevrolet Cavalier Logo

202 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...