Question about 1999 Jeep Wrangler

1 Answer

My 1999 Jeep wrangler Horn is not working the airbag light is on and the back up light are not working. all fuses are good

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

Hello, I believe you may have a broken clock spring which is located in your steering wheel. Mine did this some time ago and I had it replaced. I am pretty skilled at repair work but I left this to the stealership/mechanic incase they accidentally deploy the airbag in the process of fixing it their money not mine. Good luck and let me know if I am correct or if I can offer any other help.

Posted on May 05, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Airbag light is on and no horn

Check air back harness plug and horn assembly. Most likely its a connection problem. Be sure to dissable the air bags by pulling fuse first.

Apr 17, 2013 | 1999 Jeep Cherokee

1 Answer

Horn does not stop blowing

Horn switch is located in the steering wheel if your horn button is not stuck in the pressed position than your switch is stuck if you have airbags in the vehicle and are not familar with working around them then it is best to pull htthe fuse for your horn and let a reputable mechanic fix the issue.

Jun 27, 2012 | 2006 Jeep Wrangler 4.0

1 Answer

I have a 1999 wrangler my horn quit working and my airbag light stays on any suggestions.

my horn quit working on my 99 wrangler...took it to a shop...the part they changed was called a clock switch...very expensive part but it fixed the problem...part was supposedly dealer only part...horn works great now

Sep 16, 2011 | 1999 Jeep Wrangler

1 Answer

I have a 1999 Jeep TJ, the wipers, radio and turn signals all stopped working. Checked fuses, nothing seems blown. Also, they all work when the ignition switch is in the accessories position, but when...

Had the same thing with my 2004 Wrangler. The Airbag light stayed on also. Took to dealer - Cost $400 for them to replace the ignition. Fixed every thing.

Sep 14, 2010 | 1999 Jeep Wrangler

1 Answer

1998 Jeep Wrangler. Airbag light is on and the horn does not work. Have checked, replaced airbag fuses.

You have a bad "clockspring" inside the steering wheel. A bit complex to write it all out and if I forget anything the bag could deploy in your face while changing it out. You can find detailed instructions for that job in both chilton or haynes manuals.

Aug 23, 2010 | 1998 Jeep Wrangler

1 Answer

My horn broke ive been trying to fix it and i think its the relay while looking my fuse box does not have a relay in the abs pump and the abs do i need those relays its a jeep wrangler 1999 sahara

If you often have the top down, it may be the electrical connection between the steering wheel and the steering column. The horn on my '97 wrangler quit working and my mechanic said it was probably due to dirt. All you have to do is remove the airbag and then the steering wheel and you will see a round plastic part that the horn button and airbag plug into. If you aren't getting any electricity to those plugs, that's probably your problem. That plastic piece is what you would need to replace and it should be available at your dealership.

Jun 25, 2010 | 1999 Jeep Wrangler

1 Answer

Horn not working. Fuse is good. 2005 Jeep Wrangler. How do you remove the rubber cover on the sterring wheel to get at the horn.

May be bad horn. Get a 12 volt test light or multi-meter and attach to the horn wire at the horn. Have a helper press the horn. If you have 12 volts when it is pressed, horn itself is bad. Otherwise, may be bad horn relay. Horn cover should pull off.

Dec 31, 2009 | 2005 Jeep Wrangler

1 Answer

2008 Jeep Unlimited - Horn cruise and airbag all quit

have you gone through any deepwater lately, if so than you may have a short in the fuse box under the hood, remove the cover and than remove the fuses after you inspect than blow out entire fuse box with compressed air until satisfied, than re istall the fuses ( also check horn fuse to make sure its good) and start it up.......hope I could help

Sep 09, 2009 | 2004 Ford F150

2 Answers

Horn will not blow

most likely the airbag/ horn rotating clock spring contact under the steering wheel has an open circuit in the ribbon, this is the most common cause.

Feb 25, 2009 | 1999 Jeep Grand Cherokee

4 Answers

1997 Jeep wrangler

Clock spring mech is prob bad, first easy check is remove airbag 2 8mm bolt from back side of wheel make sure wires are still connected if they are good the clock spring mech is bad you can use a steering wheel puller to remove wheel and clock spring mech just snaps out and has 2 plugs on it, I have 2 if you need one.

Aug 18, 2008 | 1997 Jeep Wrangler

Not finding what you are looking for?
1999 Jeep Wrangler Logo

Related Topics:

553 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts


Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides