Question about 1995 Chrysler LeBaron

1 Answer

How to time the timimg belt for a 1995 labaron v6 conv put a new water pump in need to set the timimg belt how do i line it up

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 59 Answers

Get the #1 piston top dead center, then line up the camshaft gear and the crank gear to line up with the timing marks on the engine after you find those marks slip the belt on making sure all the timing marks havent changed then check to see if the tensioner for the belt is set with the proper tension then check to see if the belt isnt slipping remember it will be spinnig at high RPMS

Posted on May 03, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kb 350 always need a new timimg belt


izuzu kb350

timing belt supposed to last up to 100,000 km depending on the engine
and on what maker of timing belt kit you buy

some kits only the belt
some with water pump, seals and tension-er

26325006-u0hqzwwltwhiuoqdg22jxaqx-4-0.jpg

26325006-u0hqzwwltwhiuoqdg22jxaqx-4-1.jpg

26325006-u0hqzwwltwhiuoqdg22jxaqx-4-3.jpg

Oct 24, 2016 | Cars & Trucks

1 Answer

What does the book say in hours to replace the timing / water pump on a 1997 chysler cirrus 2.5 v6 ? Or in your opinion what's a fair price to have this done by private person coming to the house .


Replacing Chrysler 2.2 and 2.5 liter engine timing belts

www.allpar.com/fix/timing-belt-22.html
Replacing the timing belts on Chrysler and Dodge 2.2 and 2.5 liter ... Then loosen the bolts on the crankshaft pulley and the water pump pulley so they will be ...

HOW TO PUT WATER PUMP ON - 1997 Chrysler Cirrus

repairpal.com > Questions > Chrysler > Cirrus > 1997 Chrysler Cirrus
Jul 4, 2010 - WATER PUMP WANT HOLD WATER LONG AND NOW IS MAKING A ...If you change the water pump,you need to also change the timing belt ...

Timing belt - 1995 Chrysler Cirrus - RepairPal


Nov 24, 2015 | Cars & Trucks

1 Answer

95 labaron, serpentine belt comes off.


One of the pulley's the belt drives is off center. Not knowing what engine you have I would have to say you need to replace the water pump. Check the alternator bolts one may have vibrated out also the powersteering pump and A/C compressor and idler pulley assm.

Apr 13, 2013 | 1995 Chrysler LeBaron

2 Answers

My car has a leaky water pump and the mechanic said they have to replace the timimg belt as well i have a 1995 honda accord v6 engine with over 200 and something miles


yes, you should have the timing belt changed every 80,000 mi. on a Honda. You got your use out the one from the factory, if that's how long you've owned your car.

A leaky water pump is common on Hondas with that much mileage.

When it rains it pours.

Don't worry, timing belts don't cost that much to replace. really they don't.

Jun 20, 2010 | 1995 Honda Accord

1 Answer

How do you remove the timing belt cover on a 1995 VW Golf.


What is needed Tools: 6mm and 8mm allen wrench socket, 5mm allen wrench. 8mm, 13mm, 19mm socket and ratchet. 10mm combination wrench. Long ratchet extensions (at least one 6in, more are helpful). 5inch Wheel puller (for main shaft pulley). (Some models may need a special spanner tool to adjust the timing belt tensioner) Parts: 2 gal of anti-freeze mixed with distilled water. All three V-belts. (Alt, A/C, P/S) $32.95 New water pump top. $91.91 New gasket for WP. $9.13 New timing belt. $26.13.


Procedure:

Remove battery cable (either power (+) or ground (-)) remove alternator remove A/C remove power steering pump .Remove water pump pulleys remove main shaft pulleys remove timing belt covers remove A/C mounting hardware remove timing belt (don't turn any of the wheels its connected to) replace timing belt adjust belt tension remove water pump face put on new gasket and new part.

Leave pulleys off. replace bottom timing belt cover, replace crank shaft pulley, replace steering pump, replace A/C, put small belt on A/C (hang loose) put large belt around A/C, Main and water pump pulley. put middle size belt on Main water pump and power steering pump reattach bolts for the steering pump pulleys put alternator back on adjust all belts. connect battery

Problem areas:
Main pulley: There are 4 6mm hex head bolts. These must be removed. The main 19mm hex head can be used to turn the engine it the timing belt slips and you have to readjust the timing.

Putting on new belts: This can be a real pain if you get VW belts. The adjustments won't give enough to put the belts over the edge so the easy way is to remove the pulley on the water pump. Then its real easy.

Timing: If you turn the wheels that the timing belt goes on you will have to reset the timing. Mark the timing points with something like whiteout so its easy to see. The timing mark on the toothed gears are small dots. The timing mark for the crankshaft is a small cut on the outer pulley. When its aligned with the intermediate wheel timing mark (there is an arrow on the cover as a hint) should intersect as viewed from the right wheel well. The camshaft timing mark should line up with the top of the engine near the front.

Power steering pump: It is held on with lots of bolts. One is in a channel that is hard to see but can be found with a 6" extension. If you look at the pump you will see three bolts that go into the housing. This should give you an idea where the forth is.

May 01, 2010 | 1995 Volkswagen Golf

3 Answers

I need a serpentine belt diagram for a 1992 chrysler lebaron 3.0 liter v6


1992 CHRYSLER LEBARON - V6 3.0L 2972cc 181ci GAS FI N 3

Serpentine Belt Diagram Alt., P.S., Idler & Tens.

669b86a.jpg

More details you can find in DAYCO Catalog

I hope help you whit this (remember rated this help) Good weekend.

Oct 02, 2009 | 1989 Chrysler LeBaron

1 Answer

Timing is off


just get a new timing belt the marks will be on it point the arrows toward the front of the truck and line the marks on the cams and crank with the lines on the belt there will be a dimple on the cams and crank those are the timing marks good luck

Apr 07, 2009 | 1992 Nissan Pathfinder

2 Answers

Toyota timing belt


I just did mine last month. same year & eng. you should have a Chilton repair manual, but... The cams R marked. the marks go straight up on each. the crank has to be on TDC on compression stroke. put #1 piston up (front pass side) & feel for air pressure coming out with your finger to assure its on compression stroke. as you apply the belt, w/ the tentioner off, the cam marks will move out a hair & no longer be ligned up with the marks on the timimg cover backing plate. they will each be off about 1/8 away from the marks on the backing plate. some belts are marked with white lines that line up w/ marks on the pulleys. 610-905-4257 Barry

Jan 20, 2009 | 1995 Toyota 4Runner

1 Answer

Timing belt


What engine do u have? it depends, the worst case senerio would be new valves in most cases.

Dec 09, 2008 | 2005 Chrysler Sebring Conv

1 Answer

Remove and replace waterpump 1995 3.1 V6


3.1 V6's are not hard to do. If you stand infront of the car on the passanger side follow bottom radiator hose that is the water pump. There are 4 or 5 bolts holding the pully on do not take belt off yet. Break looses the bolt's first. Pull the pully off there will be at least 4 bolts holding the housing on remove them you will loose about a glass of water. Pull the old water pump out and put new one in make sure you use blue silicone or something similar for water put silicone on water pump make sure holes line up on the gasket when you put it on the pump let sit for 5 min. put silicone on other side of gasket put it right one don't let site reassemble everything and your good to go.

Jul 30, 2008 | Chevrolet Corsica Cars & Trucks

Not finding what you are looking for?
1995 Chrysler LeBaron Logo

237 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...