Can not put key in the ignition.

How to replace a ignition cylinder lock on a 2001 Pontiac aztek ...

pontiacforum.com/pontiac/showthread.php?t=22245
Sep 16, 2010 - Pontiac Aztek Forum Discuss topics regarding the Pontiac Aztek. ...You'll now have access to entire lock cylinder, ignition switch etc.

Key stuck in ignition of Aztek- how to remove key ... - YouTube

? 3:11
www.youtube.com/watch?v=_Ie3bFggetY
Jan 3, 2015 - Uploaded by Syrita Vaughn
One day I could not remove my key out of my Pontiac Aztek. After removing the shell of the ignition, I figured out how to release my key. ... It was a toggle switch that was an on/off button. It was just long enough to reach the ...

Have you tried Lock ease or some other Lock Cylinder Lubricant? Even motor Oil usually will work but you will have to wipe off the Key several times. I have a 2002 Aztek and lubricate all the locks annually. I have had your problem only once and Oil did the trick. The only other thing I can think of is the possibility of someone putting a foreign object into the Lock such as a small piece of wire or Paper Clip. It could also have a worn out lock cylinder where the tumbler springs have popped out due to lack of lubrication and wear. Let me know!

You need a new ignition switch lock cylinder.

i;m soooo glad you found the help you needed!!!!! this is a great place to save your money!!!!!

sounds like the ignition lock cylinder has gone bad call a locksmith.

I just push a pencil or pen through a hole located under the ignition on the steering column. There's no cap... but I have a 2001 Aztek.

At first my key would stick in the ignition..then after a little while it could be removed...some times I had to wiggle the shifter.now it does not work and the key is stuck...Thank you all...Ray from MI

sounds like there is a problem somewhere in the linkage.

http://www.the12volt.com/installbay/forum_posts.asp~TID~9470

This will require a keyfob bypass. It has a transponder in the key that needs to be 5" or less away from the ignition. You may need to seek professional help.

There is a hole under the steering column right near the ignition switch, if the key gets stuck, stick a pen or something in the hole, you will feel the little lever move and you can remove the key.