- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Check for fuel pressure. Commonly fuel pumps are changed when the inertial switch may have tripped. Google ford inertia switch. It is a resettable safety device for the fuel system.
Most Fords have a fuel reset button. When you ran out of gas you tripped the circuit. Most of the time the button will be on the passenger side by the kick panel. The exact location should be in your owners manual or your local library or auto parts store will have a copy of one for your specific vehicle.
got a 2004 ford explorer it wont start but it turns over put fuel pump starter evap canister and purge valve it was broke,and a battery fuel filter,tac system and it still wont crank
seperate the fuel line at the fuel injecter, turn the engine over if fuel comes out , more than likely it is not the pump, if you get no fuel, change the filter, try again, if no fuel most fuel pumps today are in the tank, drop tank change pump
TUNEUP? WHAT WAS CHANGED?NEED TO CHANGE WIRES,PLUGS CAP&ROTOR ELECTRIC COIL, CHANGE THE FUEL FILTER,IF STILL THE SAME?TAKE OUT THE FUEL FILTER IF WET THEN OK, BUT IF DRY THEN ,FUEL NOT GETTING TO THE ENGINE,CK WIRES TO AND FROM THE PUMP,STILL THE SAME THEN NEW PUMP
×