Question about 2000 Nissan Xterra

1 Answer

Replaced a flywheel sensor. Need to reset truck Nissan xterra 2000

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 326 Answers

I assume you are saying need to turn light out/ service engine soon light if so there are two ways you can hook to a scanner that has the ability to turn off light or you can unhook both battery cables from battery touch the two cables together for about 10 secs. reconnect to battery if the problem that caused the light to come on has been corrected the light will go out upon completion of drive cycle by touching the cables together you have drained the kam keep alive memory and light should go out

Posted on May 03, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replace crankshaft sensor on 2000 nissan xterra


the crankshaft position sensor is directly behind the driver side cylinders, about 8 inches or so to the left of the exhaust and up behind the head. its a grey clip

Nov 14, 2011 | 2000 Nissan Xterra

1 Answer

Knock sensor 2000 nissan xterra V6, location of sensor? how to change knock sensor?


Hello the sensor is located under your intake manifold you will need to remove the intake manifold to gain access to it here is photos of what and where your looking for thisregeetone_0.pngregeetone_21.jpg

Jan 23, 2011 | 2000 Nissan Xterra

1 Answer

Removal of knock sensor on 2000 nissan xterra v6 3.3


very labor intensive repair.not for a novice. its under the lower intake. way down deep. You dont realy need to replace it unless your xterra is supercharged.

Sep 22, 2010 | Nissan Xterra Cars & Trucks

1 Answer

000 NISSAN Xterra -- after warming up, loses RPM by 500-1000..... have replaced ignition wires and distributor, checked mass air flow sensor and OK.....


I had a problem on my Nissan Xterra 2000. Symptons sound similar. In my case, it ran fine for a while and then suddenly the engine starts to stumble and lose output. At one point it did not even have enough HP to move. Irregular idling too. Thought it was water in my fuel. Bought water remover from the store and added to gas tank. Problem did not go away. Instead, "Service Engine Soon" light came on. Had to have it towed to the dealer as there was no way the engine could keep up with traffic. Dealer replaced the "Crank Position Sensor" today. Parts $33.00, Labor: $300 (about 3 hrs worth of work). Seems to work fine now but I will wait and see. Dealer also stated that Distributor bearing appears to be noisy and will need to be replaced sooner or later. I will wait for it to go before I fix that.

May 22, 2009 | 2000 Nissan Xterra

1 Answer

2000 Nissan Xterra Service Engine soon indicator is always on


The knock sensor is not a huge deal to replace and will not turn on the light. It should be dont though.

The crankshaft sensor is located directly between the engine and transmission. It is dead center at the bottom.

May 17, 2009 | 2000 Nissan Xterra

2 Answers

Sensor locations


Here's the diagnostic procedure for DTC code 0340, directly from the service manual:

8f57ac3.jpg
a08cb42.jpg
ce6092c.jpg
b3a9ad5.jpg
e76f3a6.jpg
5a415d6.jpg
f69cd27.jpg

Mar 14, 2009 | 2000 Nissan Xterra

Not finding what you are looking for?
2000 Nissan Xterra Logo

109 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...