Question about 2005 Dodge Ram 1500
How do i self program a keyless entry remote for my 2005 dodge ram 1500 truck it is my back up remote
ATTENTION: You MUST HAVE one working remote to add one more to the system. If you do not have one working remote right now then these instructions will not work. You will have to have a Locksmith or dealership use a computer to program the first remote for you.
1. Turn ignition to the RUN position (as far as you can go without starting the engine).
Wait for chimes to stop.
2. Using original programmed remote, press and hold the UNLOCK button on the
remote for between 5 and 10 seconds.
3. While holding UNLOCK button, and before 10 seconds passes, press and release
the PANIC button. A chime will sound to indicate that the transmitter programming
mode has been entered.
4. Within 30 seconds of the chime, press a button on all remotes to be programmed
into the system including any previously programmed remotes, a chime will
sound after each remote has been programmed.
5. Turn the ignition OFF to exit the transmitter programming mode.
6. Test Remotes
Thank you for using fixya and good luck
Posted on May 03, 2010
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Nov 08, 2010 | 2005 Dodge Ram 1500
Apr 26, 2010 | 2005 Dodge Ram 1500
Feb 06, 2010 | 2008 Dodge Ram Pickup 3500
Jan 02, 2010 | 2005 Dodge Ram 1500
Jun 14, 2009 | 2004 Dodge Ram 1500
Jun 10, 2009 | 2004 Dodge Ram 1500
Jun 07, 2009 | 2003 Dodge Durango
Jul 28, 2008 | 2001 Dodge Ram 1500 Truck 2WD
671 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: