Question about 2002 Isuzu Axiom

1 Answer

The check TOD light is coming on - 2002 Isuzu Axiom

Posted by on

  • jesuan90 May 03, 2010

    the things is its come on and off it doesnt stay in the check TOD it comes off and the axiom runs fine



  • jesuan90 May 03, 2010

    thanks il do that

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,341 Answers

This means you need a diagnostic device connected to the vehicle to read/erase error codes. If there is any error codes retrieved then take note of the code which is required in order to start the troubleshooting if applicable. Hope this helps.

Posted on May 03, 2010

  • heeman mohun May 03, 2010

    If this is the case it could be triggered by a loose wiring but to be on the safe side, it is best to have a diagnostic test done. It will show errors, if any, when you connect it to the vehicle.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

My tod check light keeps flashing,check engine light stays on,brake light comes on and off,it drives fine at times then goes into 4 wheel drive and i cant make turns. there is no mechanic within 100 miles...


The place to start would be to scan your vehicle's computer network fo fault codes. Until this is done, there is nobody in the world that can do anything more than "GUESS" what could be causing your problems.

Aug 20, 2011 | 2001 Isuzu Trooper

1 Answer

Mmy tod check light keeps flashing,check engine light stays on,brake light comes on and off,it drives fine at times then goes into 4 wheel drive and i cant make turns. there is no mechanic within 100 miles...


you need to check out the code first, I know ps701 can diagnose your car. Or you can take it to the auto zone or local dealer to check out, Hope help.....

Aug 20, 2011 | 2001 Isuzu Trooper

1 Answer

TOD Check light? My check light under the TOD keeps flashing on and off. Please help me what should I do?


Have a local shop or auto parts store perform a "Fault Scan" - Most good auto parts stores will do it for you for FREE. They read the codes, print out what is wrong and reset your lights.

Jan 05, 2011 | 2001 Isuzu Trooper

1 Answer

"Check" light on TOD goes on...


my 99 honda crv, 2 wheel drive. turns on..drives for a period of time, then ramdomly shuts off and then i have trouble turning it on..but it does turn on eventually. it does this everyday

Sep 03, 2009 | 1997 Isuzu Trooper

1 Answer

Tod light on


spark plugs???

The TOD dictates that 1 of 3 things may have gone faulty: clutch in the transfer case, TOD computer, Speed Sensor on the transfer case

The clutch in the transfer case almost never goes bad and the computer is reliable too... it's common for the speed sensors to fail though... you should check that and hook it up to an OBDII reader to see what the exact code is... or you can test the speed sensors with a test light....



Aug 20, 2009 | 2002 Isuzu Axiom

1 Answer

My rear wheel TOD lights are lite up green, I cant figure out how to turn it off


That is perfectly normal for when the TOD is not engaged. When it is engaged the fronts will light up according to how much torque is being sent to them. As long as the "CHECK" light on your TOD display is off, you are fine.

Jul 25, 2009 | 1999 Isuzu Trooper

1 Answer

Check light on dash panel under the torque on demand diagram and where do i add transmission fluid


I have the same problem with my '98 Trooper - the TOD light, that is. Took it to a good shop for diagnosis. They said the TOD sensor was bad and it would cost abot $480 for the part. We were looking at a hefty bill, so decided to do without TOD for now. Manual 4WD still works fine. They said that Isuzu's arrogance that the transmission wouln't leak leaves us with a tiny 1/4" check port to fill through. We got concerned enough, and had over 180,000 miles, that we took it to a transmission shop and had it flushed and refilled correctly. To be honest, we now have 230,000 miles and don't really see any ATF leaks.

Jul 01, 2009 | 1998 Isuzu Trooper

1 Answer

TOD


TOD light blinking means the TOD is sending a fault code. have the dealer check it out.

You can switch from 2WD to TOD-HI, at any speed below 50 MPH.

If you want to switch to TOD-LOW, you have to stop the car, put the transmission in Neutral, then turn the dial to TOD-LOW. When you switch out of LOW, do the same.

Jun 02, 2008 | 2003 Isuzu Axiom

Not finding what you are looking for?
2002 Isuzu Axiom Logo

Related Topics:

82 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...