Question about 1998 Dodge Ram 1500 4WD

3 Answers

How do I remove fuel pump from dodge 1998 1500

Whats the best way to change a fuel pump on 1998 1500 dodge truck

Posted by on

Ad

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

An easier way you may want to consider is removing the bed of the truck. There is only 6 bolts from underneath.2 in the front and 4 in the rear then just remove fuel cap and fuel neck screws and unplug tail light plugs on both sides.

Posted on May 10, 2010

Ad
  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

The easiest way I found out to replace a fuel pump on dodge ram truck is to side to box back a bit. I can't remember how many bolts. I think there is 8 bolts. Then slide it back and you can reach it from the top without dropping the tank. I had to do this to my 98 dodge 1500 and my son's 95 dodge 2500. Much easier then spilling fuel and lifting heavy tank for of fuel.

Posted on Nov 22, 2015

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 76 Answers

(1) Drain and remove fuel tank.

(2) The plastic fuel pump module locknut is
threaded onto fuel tank. Install Special Tool 6856 to locknut and remove locknut. The fuel pump module will spring up when locknut
is removed.

(3) Remove module from fuel tank.

Posted on May 03, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does my 2012 dodge ram 1500 fuel pump stay on...


About 117,000 results (0.73 seconds) Search Results

    TIPM Repair & Bypass Solutions for 2007-2014 Dodge ...

    www.verticalvisions.com/TIPM_solutions.php
    2011-2012 Dodge Ram 1500; 2011-2012 Dodge Ram 2500; 2011 Chrysler Town ... test your fuel pump relay, and bypass a bad fuel pump relay to stay on the road. .... Mytesting/bypass device will often narrow down your problem to the TIPM ...

    Dodge Ram 1500 Questions - fuel pump keeps running ...

    www.cargurus.com > Questions > Dodge > Ram 1500

    CarGurusNov 1, 2013 - fuel pump keeps running when key removed - 2011 ram 1500 slt quad ...fires right up but will not stay running unless I keep my foot on the gas.

    I Changed The Fuel Pump On My 97 Dodge Ram 1500. Ran ...

    www.cargurus.com > Questions > Dodge > Ram 1500

    CarGurusI changed the fuel pump on my 97 dodge ram 1500. Ran great for 2 days then stopped running. I can hear pump working, replaced fuel system relay, engine tur... ...Jun 24, 2012 at 03:48 PM about the 1997 Dodge Ram 1500 2 Dr ST 4WD ... The truck fires right up but will not stay running unless I keep my foot on the gas.

    2011 Dodge Durango Fuel Pump Relay Stays Engaged ...

    www.carcomplaints.com/Dodge/.../fuel.../fuel_pump_relay_stays_engag...

Feb 03, 2016 | Dodge Cars & Trucks

1 Answer

1989 dodge ram 50 2.0 engine


Fuel pump
REMOVAL
  1. Disconnect the battery ground cable.
  2. Disconnect the fuel inlet, outlet and return hoses at fuel pump.
  3. Remove the two fuel pump mounting bolts, and remove the fuel pump.
  4. Remove the fuel pump gaskets and insulator.
Check for leakage, if there is oil or fuel leaking from the breather hole, oil seal or diaphragm of fuel pump, the pump is defective. Replace fuel pump as an assembly.

INSTALLATION
  1. Turn the crankshaft so the No. 1 cylinder is at top dead center on the compression stroke. NOTE : This is to minimize cam lift for ease of installation.
  2. Insert the push rod into the cylinder head.
  3. Install the new gasket and insulator, install the fuel pump.
  4. Tighten the bolts firmly.
  5. Connect the fuel hoses to the fuel pump ******* and tighten the hose clamps.
  6. START the engine.
  7. Check for fuel or oil leaks.

Jun 25, 2015 | Dodge Cars & Trucks

1 Answer

Trying to find fuel pump on my '84 G30 1 ton van with a V8 350 5.7 liters engine? And whats the best way to replce it?


Trying to find?

Best Way?

Almost all fuel pumps are in the fuel tank

You have no choice but to remove the tank,
then remove the pump from the top.

A'm I missing the question?

Jun 30, 2011 | Chevrolet G30 Cars & Trucks

1 Answer

Not geting fuel


first check the fuse box to see if there are fuses for the fuel pump, and also check to see if there is a fuel pump relay...if fuses are good..then have someone turn the key on while you listen to the fuel pump relay...it should click when the key is turned.....if this works then there may be the possibility that the fuel; pump is defective...you can try hitting the fuel tank with a rubber mallet and see if the fuel pump starts working again...a lot of dodge fuel pumps will become intermittant(I have had several dodge p/u trucks do this) and if you pound on the fuel tank ...sometimes they will start working again....if it starts working, then you will need to change it..because it will only happen again...and probably at the most inconvenient time...to change the fuel pump you will either need too remove the bed of the truck(which I find is the easiest way) to get to the top of the fuel tank. Or , you can remove the straps that hold the fuel tank up...the only problem with this is if the tank is full then it is going to weigh somewhere around 250 pounds...best way is to remove the bed....on top of the fuel tank is the "fuel deliver module"...as dodge refers to it as...there is a large "C" clip that holds the unit in the tank...you need to remove the clip with a flat blade screwdriver and then the module will pop up...be careful when removing the unit as there is a float assembly that may be damaged when you remove the assembly.....sometimes you may be able to obtain just the fuel pump(depending on model) and sometimes you may have to replace the whole delivery module, which is rather expensive...then reassemble is revers order

May 28, 2011 | 1990 Dodge Dakota

1 Answer

Whats the best wat to chang my fuel pump


Either jack up the truck and drop the tank risking need of more repairs to straps or remove bed from truck and do it while the tank is still on the truck .
I have in the past with old rusted beaters cut a hole in the bed of the truck to access the fuel pump and put the bedliner back in so I didnt see the hole.

Oct 23, 2010 | 1999 Chevrolet S-10 Pickup

1 Answer

I need pics of how to change a fuel pump in a 1992 dodge caravan...ty...


  1. Release fuel system pressure.
  2. Fuel tank must be removed prior to fuel pump service.
  3. Using a hammer and a brass drift, carefully tap the fuel pump lock-ring counter-clockwise to release the fuel pump.
  4. Remove the fuel pump and its O-ring from the fuel tank, and discard the old O-ring.
42266322

May 31, 2010 | 1992 Dodge Grand Caravan

2 Answers

How do I change the fuel pump?


Go to the autozone website at autozone.com and register your vehicle. It's free and will give you access to an online repair manual for your vehicle. The procedures for changing out the fuel pump can be found there. ( I checked). Hope this helped and best wishes.

Jul 31, 2009 | 1990 Dodge Dynasty

1 Answer

Only starts when pouring gas in throttle body


Tried changing the fuel filter? If that's not it it could be a bad pump

Jun 02, 2009 | 1998 Dodge Durango

1 Answer

1996 dodge dakota fuel pump


You have to remove the fuel tank.

Nov 17, 2008 | 1996 Dodge Dakota

Not finding what you are looking for?
Cars & Trucks Logo

423 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6924 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...