Question about 2004 Dodge Durango

Open Question

My 2004 dodge durango has a cracked caliper piston, but web pictures of it does seem it is a 'true' hydraulic piston, is there another piston behind it?

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: front spindle caliper mount holes stripped,any fixes

there is a thread repair kit that you can get out of advance auto for about $40, but your better off replacing the spindle.

Posted on Feb 26, 2009

Ad
  • 202 Answers

SOURCE: How to depress rear brake caliper piston on an 2004 Audi A4

It must be turned clockwise while being pushed in. The local parts store will have a tool just for this purpose.

Posted on Mar 27, 2009

  • 75 Answers

SOURCE: 2004 dodge durango - catalytic converter issue

It has to be welded on. Universal cat is about $250-$350 installed.

Posted on Jul 19, 2009

motor1258
  • 6674 Answers

SOURCE: my 2004 dodge durango cuts off and my check engine stays on

Save a lot of guessing and unnecessary expense & run into a PepBoys, or Autozone and have them scan for trouble codes (free) and go from there. If it's obvious from codes, what the problem is, buy the part while your there, but if not, get back to us with code(s) and we'll assist you further.

Posted on Oct 12, 2009

  • 1 Answer

SOURCE: Need 2004 Dodge Durango Belt Diagram

need to fix the auxillary coolant pump? WHERE IS IT LOCATED AND IS IT HARD TO DO.

Posted on Apr 07, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What cause 2000 dodge Durango break fluid leak behind the driver wheel


check for the piston seal leaking ( piston too far out from worn out pads), cracked brake hose, loose hose fitting, broken brake pipe.

Jul 15, 2014 | 2003 Ford Windstar

2 Answers

2004 dodge 4x4 rear brake caliper pistons wont move & 1is broken


You have to open the bleeder valve on rear calipers,
as well as turn or screw in the parking brake adjuster,
which is turning the caliper piston in or clockwise,so new
pads will fit on

Do that by hand & save the c-clamp for the front calipers

Mar 27, 2013 | Cars & Trucks

1 Answer

Brake shoes from old rear axle not fitting on to the new rear axle 2002 durango


you have compress the caliper piston to get brake shoes back on.

Feb 05, 2013 | 2002 Dodge Durango

1 Answer

The caliper will not come off. It seems like something is holding it on but the two bolts are out


Remove the hose from caliper, push the piston back with a beefy screwdriver. replace the caliper and hose assy. with new pads

Sep 12, 2010 | 2004 Dodge Ram 2500

1 Answer

Can i replace the abs system and how do i do it in a 2004 dodge durango slt


change all your break calipers. thats wher the abs system is. but chek the ground wires on your calipers 2 make sure that they are all grounded. maybe thats all that is wrong

Feb 15, 2010 | 2004 Dodge Durango

1 Answer

Removing the rear rotors


REMOVAL - REAR ROTORS
(1) Raise and support the vehicle
(2) Remove the tire and wheel assembly.
(3) Remove the disc brake caliper, (Refer to 5 -
BRAKES/HYDRAULIC/MECHANICAL/DISC
BRAKE CALIPERS - REMOVAL).
(4) Remove the caliper adapter bolts (Fig.
61).(Refer to 5 - BRAKES/HYDRAULIC/MECHANICAL/
DISC BRAKE CALIPER ADAPTER -
REMOVAL)
(5) Remove the retaining clips and rotor assembly

(Fig. 61).
c0d28fd.jpg

You can get a factory service manual from Promanuals.net here is a link to the 2004 Dodge Ram Service Manual it was only 20 bucks and very informative.

Sep 29, 2009 | 2004 Dodge Ram 2500

1 Answer

Worn brake pads


Front brake pad exchange guide.

Step1 Park the Dodge Durango on a flat surface. Put the emergency brake on and put wedges behind the wheels to prevent the vehicle from rolling. Disconnect the negative battery cable from the battery. Drain 2/3 of the brake fluid from the master cylinder, using a syringe. Remove the wheel and the tire assemblies. Step2 Compress the caliper piston back into the caliper bore using a large C-clamp to drive the piston into the bore. Use additional force if it is required. Using a 3/8 inch hex wrench or socket remove the caliper mounting bolts. Step3 Rotate the caliper rearward off the rotor and out from its mount. Remove the inboard and outboard brake pads. Remove the spring clip that holds the inboard brakes in the caliper. Tilt the pad out at the top to unseat the clip. Remove the retaining spring that secures it in the caliper. Unseat one spring end and rotate the pad out of the caliper. Step4 Suspend the caliper assembly from the Durango frame using mechanic's wire. Do not allow the caliper assembly to dangle from the brake hose as this may damage the brake hose. Step5 Clean the surfaces of the caliper and steering knuckle with a wire brush. Apply multi-mileage grease or similar product. Using brake fluid or break cleaner clean the caliper slide pins. Apply a light coating of silicone grease to the pins. Step6 Install the inboard brake pad and it's spring. Install the outboard brake pad. Install the caliper over the rotor and seat it in its original position until it is flush. Using a torque wrench, torque the slide caliper pins to 22 ft./lbs. Step7 Add brake fluid to the master cylinder. Bleed the brakes. Reconnect the negative battery cable to the battery. Start the engine and pump the brakes 3-4 times to seat the brake pads. Reinstall the wheels. Test drive the Durango at slow to moderate speeds to ensure that the maintenance was performed correctly.
Rear brake pad exchange.

Step1 Lift the Durango off the ground with a car jack. Support the vehicle on all sides with jack stands. Keep children and small animals out of the vicinity when you replace the brakes. Step2 Loosen the lug nuts on the wheels with a torque wrench. Remove the wheel and tire assemblies and set them aside, face up, to prevent damage. Step3 Compress the caliper and remove it by lifting the top up and off the caliper adapter. Hang the caliper from the Durango's frame with mechanical wire. Step4 Remove the inboard and outboard brake shoes from the caliper adapter. Take off the top and bottom anti-rattle springs. Keep the springs separated, as they aren't interchangeable. Step5 Press the piston into the bore with a C-clamp. To prevent damage to the pistons, insert an old brake shoe in between the C-clamp and caliper piston. Remove the C-clamp. Step6 Wipe down the caliper mounting adapter and anti-rattle springs with brake cleaner. Grease the anti-rattle springs with brake grease. Install the bottom anti-rattle springs, followed by the top anti-rattle springs. Step7 Install the inboard brake shoes followed by the outboard brake shoes. Replace the caliper and the wheel and tire assemblies. Lower the vehicle to the ground and pump the brakes to seat the pistons.


Please rate and god bless:)


Apr 02, 2009 | 1999 Dodge Durango

1 Answer

How are the front disk brakes removed on a 2005 Dodge Durango?


when you have the caliper lossened sometimes you have to depress the caliper piston to get the pads out. Use a large flat head screw driver and pry the pistons back a little. Be careful not to pry too hard. Hope this helps.

Jan 10, 2009 | 2005 Dodge Durango

1 Answer

Install rotors


Jack up car, remove wheel assembly, remove brake caliper after moving pads into piston and retainer. DO NOT LET THE CALIPER HANG! The rotor is now free to come off the spindle....accordianman

Jul 19, 2008 | 1999 Dodge Durango

Not finding what you are looking for?
2004 Dodge Durango Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6924 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...