Question about 2000 GMC Jimmy

Open Question

Key gets stuck in my 2000 GMC Jimmy

When I shut off my 2000 GMC Jimmy, the key will get stuck in the ignition from time to time, and it won't turn all the way back for me to be able to pull the key out. I have to play with it sometimes to get it out. What is causing this?

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 35 Answers

SOURCE: can't remove key from ignition 2001 gmc jimmy

I ran into the same problem ..... the fix was make sure selector was all the way in park. If it didn't lock in park (it showed in park but didn't lock) I couldn't take the key out but I could turn the vehicle all the way off.

Posted on Jan 04, 2009

Ad
  • 124 Answers

SOURCE: 2000 gmc jimmy stuck in 4lo

if you do not have auto 4x4 try resetting the 4x4 computer by pulling the courtesy lamp and the ATC fuse for 1 minute. then reinstall fuses then cycle key on and off 5 times. please rate this answer.

Posted on Dec 05, 2008

  • 11 Answers

SOURCE: 2000 gmc jimmy dont start

do you have access to a scanner to check the computer , possibly the computer has gone bad .

Posted on Dec 09, 2008

misterwoods
  • 24 Answers

SOURCE: key stuck in the ignition of 1998 GMC Jimmy

Is the ignition switch turned off? Is it in ACC mode. It may be that the locking mechanism on the steering wheel is engaged. If that’s the problem, try working the steering wheel back and forth while also trying to remove the key. This may help you to remove the key itself, but does not fix the overall problem. I believe that the cutting of the key its self is the problem. Try just getting a knew key made. Hope this helps…. John…

Posted on Jan 19, 2009

  • 218 Answers

SOURCE: 93 gmc jimmy 4.3 vortec has a flooding problem. I

The most likely 2 causes are leaking fuel pressure regulator on the side of the spider, or leaking fuel LINE going into or out of the spider. Both are reasonably common failures. a replacement spider would come with a new regulator but NOT a new line, so verify which is leaking before you order a spider up.

They do not fail that often anymore, not like 5 or 8 years ago when gasoline still had mtbe in it, the vortec unit is very dependable nowadays.

Posted on Sep 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 gmc jimmy key stuck in ignition-- automatic- no key release button


If you can't get the key out you may need to change out the ignition switch it's not that ******* a gmc

Sep 06, 2014 | 2000 GMC Jimmy

1 Answer

Dome light and key in ignition tone won't quit.


Yes, I would lean toward a stuck drivers door latch. Your door open switch is located in the latch itself and the ding is a reminder your key is in the ignition so you don't lock them in the vehicle when you lock the door. even though your door is shut, the truck still thinks it is open. sometimes spraying the latch with some WD-40 will get it freed up and working again, but a new latch might be in your future.

Apr 21, 2013 | 1997 GMC Jimmy

1 Answer

Key stuck in ignition and won't turn off


pull steering wheel off take out switch and replace or work back n forth ppull out easily with pliers when get it out get some graphite from parts store and shoot it in keyhole and run the key in and out it a few times and have another key made

Sep 06, 2012 | 1992 GMC Jimmy

1 Answer

2000 GMC Jimmy looses power (blacks-out) completely


ignition barrel needs replacing!
Cheers Rob.

Jul 28, 2009 | 2000 GMC Jimmy

2 Answers

Ignition key


key cylinder pin that holds it in is stuck replace key cylinder they will give you new key along with this

Jun 08, 2008 | 2000 GMC Jimmy

Not finding what you are looking for?
2000 GMC Jimmy Logo

Related Topics:

179 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...