Question about 2001 Daewoo Nubira

Open Question

My 2001 Nubira has no flasher or turn signal. the switch and wires look ok as far as i can tell. Is there a relay that needs to be replaced?

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
emissionwiz
  • 76630 Answers

SOURCE: 1996 honda accord no turn signal

Check the wiring in the front and back to lights for shorts to ground, if nothing is found replace the turn signal switch, be careful to disarm the airbag before doing any work on the column as the steering wheel must be pulled to replace the turn switch.

Posted on Oct 07, 2008

Ad
emjem74
  • 162 Answers

SOURCE: 1998 daewoo nubira power windows intermitently stop working

relay for electrical windows is located underneath the arm rest in the drivers door if memory serves me right.

Posted on Feb 24, 2009

csmock132
  • 4669 Answers

SOURCE: Signals and Four Way Flasher working intermittently

Replace the hazard switch, It has the turn signal flasher built in to it.

Posted on Apr 09, 2009

carfreak1217
  • 109 Answers

SOURCE: 2001 chevy cavalier turn signal relay location

Above the brake pedalc956ca0.gif

Posted on Jun 27, 2009

  • 1 Answer

SOURCE: turn signals hazards flasher don't work jeep

I NEED TO LOCATE THE SWITCH WHERE IS IT ?
MY INDICATORS NOR HAZARD LIGHTS ARE WORKING I DONT KNOW WHAT IS WRONG WITH IT CHANGED BULBS BUT NOTHIGN THEY ALL WENT OUT AT THE SAME TIME
SO THERE MUST BE A RELAY SWITCH SOMEWHER BUT DONT KNOW WHERE ?
THANKS FOR HELPING

Posted on Apr 01, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a1997 Chevy 1500 and I am wondering were is the flasher relay at.


Most cars the flasher relays are up under the dash not far from the steering column. I had several makes of cars and they all were up there.

Jan 10, 2016 | Cars & Trucks

1 Answer

My 2001 Jeep Grand Cherokee turn signals stopped working. The indicator light/chime also stopped working. Tried flasher relay and a new switch but still not working. Hazards work fine. Any ideas?


Did you check power an grounds with volt ohm meter ? you replaced the combination flasher ? Did you check fuse # 20 & 4 in the underhood junction box ? Pull the flasher relay an check for voltage in an voltage out , need a wiring diagram to do that ! Go www.bbbind.com free wiring diagrams !

Jul 24, 2015 | Jeep Cars & Trucks

1 Answer

2000 impala,emer. flasher and turn signal not working; have replaced turn signal switch


you may have a bad flasher relay. its also known as a hazard relay, or turn signal flasher.

Jul 18, 2012 | Chevrolet Impala Cars & Trucks

1 Answer

1994 ford thunderbird flashers work but blinkers do not


There are two possibilities:-- 1) The flasher relay or 2) The turn signal switch.
check flasher relay,but most likely the fault is the turn signal switch . ---------- The turn signal / hazard flasher relay is located behind the dash, right of the steering column. -------- Since the hazards do work this eliminates a faulty relay as both the hazards and turn signals use the same relay to function. This leads to either faulty wiring at the multifunction (turn signal) switch or a faulty switch itself.It is always a good idea to check the wiring before purchasing the switch.Starting at the switch its the lever.And the switch wiring gets connected to relay. Test it with a meter to see if it is getting power when it is supposed to (turned ON ). If it is then wiring is OK and switch is bad. If it's not getting power then there is a open circuit somewhere in between.so its the wiring problem. ------------ this will help.Thanks.Helpmech.

Dec 21, 2010 | Ford Thunderbird Cars & Trucks

1 Answer

All the bulbs light all fuses ok but right clicker doesnt work left side clicks ok


First thing I would check would be the flasher relay. Look under the dash, drivers side for the fuse panel. See the 2 square boxes? 1 is for the turn signals and the other is for the emergency flashers. Switch those two and see if the signals work. If so, remove 1 of them ( it doesn't matter which one ) and try the signals again. If they flash, then you removed the bad flasher relay that you'll need to replace. If not, then you've removed the good relay and need to replace the other one. If switching these made no difference then you have other electrical issues and I recommend taking it to a shop for diagnosis and repair.

Nov 20, 2010 | 2001 Ford Explorer

2 Answers

Turning signals not working all the time


Sounds like the blinker relay. Is the emergency flasher switch on the dash above the radio ? If it is the blinkers relay is the same as the emergency relay. If the blinkers stop working pound on the emergency lights switch and if they start working then replace the emergency lights relay switch cause the blinkers is on the same relay as the emergency lights. My 2001 Grand Am does the same and I just hit the emergency lights switch and they start working again.

May 27, 2010 | 2001 Pontiac Sunfire

3 Answers

The blinkers and flashers are not working on my 2001 Grand Cherokee. Can you tell me where to locate the relay or switch to replace? Its not the fuse, we checked that first. thank you


when you get in your car and use the car turn signals and it does not work from the inside or out side and your hazard light dont work to then you need to replace the fuse located inside the front hood in a black box or inside the car located under the stering wheel next to the gas and brake pedle on the side. Remove it and check the fuses and flasher relay. The flasher relay in a black square looking fuse that has 3,4, or 5 prongs. That is your problem of why the hazord lights and blinkers are not working, you can go to a part store to find the flasher relay for 9 to 15 dollars max. Napa has more of a selection. PS.... when you find the flasher and its burn out it is no good ; make sure the volts match!!!! If you buy a flasher and it burns out instinly after replaced then wireing is short and go with less volts you hace to ballance things of your car was worked on before, things where changed. Check you lights in front and back brights and dim, brakes and reverse lights. replace bulbs if needed could correct the problem if flasher still doesnt let blinkers or hazord work. If bulbs where replaced and still no blinkers or hazord lights then you need a new or used (another) switch nob. You can go to a local junk yard and take off what you need off the same car you have and pay for it then replace it on your car. Or you can go to amazon ebay or such to find. If you are a WOMEN or OLDLADY or some one not good at removing parts then this is not your job. Find someone who can help, or pay something that could be so easyily done. I hope this solves your question.

Mar 31, 2010 | 2001 Jeep Cherokee

2 Answers

96 ford tarus turn signal


The turn signals and the emergency flasher are controled by a single electronic flasher unit. It looks like an electronic relay and is located on the far left underside of the dash. It is on a mounting bracket and has a three wire connector. If you do not hear this clicking when you use the turn signals or the emergency flasher it may be bad. Just remove the connector and remove the one screw holding the flasher to the bracket. Be sure the replacement is identical to the old one and compare them before installing the new one.

You may want to also check the turn signal bulbs also. Other causes would be bad signal and flasher switches, bad bulb connectors, and opens or shorts in the wiring.

Nov 19, 2008 | 1996 Ford Taurus

4 Answers

Turn signals not working --- 2001 Cherokee Limited


Check the flasher under the dash to the left of the steering column. It's got about 8 or 10 wires plugged into it.

May 30, 2008 | 2001 Jeep Cherokee

Not finding what you are looking for?
2001 Daewoo Nubira Logo

Related Topics:

161 people viewed this question

Ask a Question

Usually answered in minutes!

Top Daewoo Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

yadayada
yadayada

Level 3 Expert

76630 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8499 Answers

Are you a Daewoo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...