Question about 1998 Toyota Camry

1 Answer

I heard a rod fall or that is what it sounded like; the window ground a bit when closing it now the door will not open from either side

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 2,100 Answers

Sounds like somebody was breaking in. You have to get the door panel off so you can see what is going on in there. If the door is unlocked, maybe a slim jim will catch the handle and get it open. If the window motor is shot, or the gears, try pushing the window down by hand. if not try it with the switch. Get the window down and the door open, pull the panel, get the handles fixed and then the glass. Hope this helps.

Posted on May 03, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Drivers door is closed & the door open warning was showing that it was open, now windows will not close


sounds like the ground wire in the door failed
killing the door switch and windows.
all else ok, car drivers ok , all other doors , and locks windows all work?
head lights not dim/?
starter dont sound weak?

Apr 02, 2016 | 1999 Jeep Grand Cherokee

1 Answer

Driver door will not open from inside


remove the door trim and reposition the pull rod from the handle to the lock mechanism There is a small plastic lock bit that holds the rod in the latch hole and they break off allowing the rod to fall out.

Jul 01, 2015 | 1997 Jaguar XJ6

1 Answer

PT Cruiser right side door won't open from inside


Only the inside latch...no big problem.. When connecting the latch be sure to apply the rod back in its position ..that's the sound you heard..good luck..

Jun 07, 2013 | 2006 Chrysler PT Cruiser

1 Answer

Diver side lock rod came apart, I heard it fall into door panel How to get at it?


The door panel has to come off
to access the inner door

Blow out the water drains at the
bottom when in there

Mar 12, 2013 | Mercedes-Benz Cars & Trucks

2 Answers

Why does my 2006 toyota sienna power sliding door not close properly


Could be resistance in one of the tracks, or the motor.
If the motor hits a resistance the door opens in case the resistance is a human.

Jan 13, 2013 | 2006 Toyota Sienna

1 Answer

The inside door handle won't open door from inside outside door works fine it's on drivers side 2006 ford fusion selv6


It sounds like the connecting rod popped out of its plastic connector. Pull the door panel off and check both ends of the rod. It must be unhooked at one end or the other.

Feb 29, 2012 | 2006 Ford Fusion

1 Answer

1999 porsche boxster; when opening drivers side door with key...lock mech spins free with no resistance and door doesnt open


It sounds like it could be the plastic connecting bit that links the lock tumbler lever to the rod that operates the door lock mechanism, has broken or become disconnected. To check, you will need to remove the trim on the inside of the door, after removing any screws and the inside door lever and window winder.
Once you have the inside trim off and the plastic sheet, you will see an access hole for the door mechanism and the lock tumbler. It should be attached to the actuating rod by the aforementioned plastic bit. If plastic bit appears OK try re-attaching it or replacing it if broken. If the lever part of the lock tumbler which attaches to the rod is broken the lock will need replacing.

Jan 10, 2011 | 1999 Porsche Boxster

2 Answers

1993 Chevy Lumina apv power window issue


Also try the wiring harness from door to frame. Mine had a cracked wire and tapprently this is a common problem and when the bare wire touches metal it doesn't work as well closed versus the door open when trying the windows Hard to work with so be prepared to add in a short joint of extra wire and tape up

Mar 18, 2009 | 1993 Chevrolet Lumina APV

1 Answer

Power window on Dodge Ram 1500


no this is something you can do yourself what you need to buy first is a window motor and regulator this is the motor track system prety simple to fix but you need to pull the window up by hand and wedge it in place so it won't move till you are ready to reattach it to the new track

Dec 01, 2008 | 1999 Dodge Ram

Not finding what you are looking for?
1998 Toyota Camry Logo

Related Topics:

57 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...