Question about 1996 Mitsubishi Eclipse

1 Answer

I need a diagram of the front hub assembley for a TF maga

I need a diagram of the front hub assembley for a TF magna,I have a little play in the rotor and im not sure if there inner and outer wheel bearings like the older cars. are there any websites that could help?

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 462 Answers

Most likely(99%) you have pressed in bearing in to the hub, sience it's front wheel drive car.

Posted on May 03, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Rotor/hub assembley

check the wheel bearings for serviceability and correct adjustment

Apr 28, 2015 | 2008 Ford F-150 SuperCrew

1 Answer

Replace front passenger side u-joint on 4x4 drive axil

The wheels have to be removed, along with the brake calipers. There are four bolts that hold the unit hub bearing onto the front knuckles. The hubs have a very tight tolerance area that fits into the knuckle.
Sometimes the hub siezes into the knuckle and this is where the labor and parts can pile up. What makes this even more difficult is that the brake rotor can only be removed after the hub is knocked out of the knuckle, so it all has to come out as an assembley.

There is a nut in the middle of the hub. That nut is on the end of the axle stub, which passes through the hub bearing. If they make good time getting the hub and all out, they can still get stuck trying to get the stub shaft out of the hub. And it will have to come out to get the U joint out. Replacing the U joints should be straight forward.

Jul 11, 2010 | 1998 Dodge Ram 1500 4WD

3 Answers

Hot tire

you may have two problems sounds like either a brake hose or caliper problem also may have play in front hub bearing

Mar 21, 2010 | 1992 Ford Taurus

1 Answer

How to replace 1996 accord front disc rotors , as this year model is hard to remove rotors , please help

You must have what they call "trapped rotors" on your car.First thing is to jack the car,remove the wheel,unbolt the axle nut,remove the calliper and bracket and hang caliper out of the way with a bungi cord.Next look behind the steering knuckle where the axle goes through the hub and from back there you should see 4 bolts holding the wheel bearing hub assembly to the steering knuckle.You will need to remove the 4 bolts and very carfully remove the wheel bearing hub assembly from the knuckle.If the car has the dust shield you may have to remove the 2 phillips head screws to remove the shield and the hub assembly together.(If the car has ABS please be carfull not to hurt the wires going to it these may have to be unplugged and moved also)After you have the bearing assy. out remove the 4 bolts holding the rotor to the hub.Now you will notice the funny shapped hole in the center of the rotor where you can turn it to fit over the flange where you bolt the bearing to the car and there you go the rotor is off. REMEMBER NOT TO HIT ON THE HUB WHERE THE WHEEL BOLTS ON TO REMOVE THE BEARING ASSEMBLEY FROM THE CAR.THIS WILL DAMAGE THE BEARING!!!!!!! Also remember to re torque bearing to proper specs so bearing doesn't get damaged as you drive. (181 ft.lbs.)

Jan 31, 2010 | 1996 Honda Accord

1 Answer

Need diagram for hub assembley.

is it a stock or an after market hub?? Like Warn?

Sep 11, 2009 | 1985 Chevrolet Chevy

1 Answer

Need to change starter motor on a magna exec but cant find it

Need to fix starter motor on a magna TF executive but cant find it could you tell us where it would be located

May 10, 2009 | Mitsubishi Lancer Cars & Trucks

1 Answer

How to change c.v joint

Remove wheel, brake caliper and disc, end cap and circlip (if fitted) 6 bolts that hold the hub drive, undo and remove the hub nut by knocking back the lock washer, remove the inner hub lock nut and remove the hub assembley. remove the 6 bolts that hold the hub shaft and remove that.There will be either oil or liquid grease in it, Now you will see the drive shaft and CV joint, just pull it out. Clean all the oil or grease.knock off the old CV joint and knock on a new one, they have securing clips inside but will knock off with a hammer.refit is reversal of removal. Use silicon sealant to seal the hub shaft when you put it back. You will need to fill the swivel assembley with liquid grease. you will see the filler plug on the swivel housing, put in about half a liter Its possible you may need to replace oil seals, check as you go along. to adjust the hub play, tighten the inner hub nut until it goes tight then back it off until the hub can move freely and effortlessly, then grab the hub and pull back and forth to see how much play is there, a little is permissable, so adjust to suit. Fit and lock the washer and tighten the outer locknut. Then as i said refit as you removed. These are safety related parts , so please make sure the items are tightly secured, aftreall you dont want the wheel to fall off.
hope this helps

Feb 10, 2009 | 1994 Land Rover Discovery

Not finding what you are looking for?
1996 Mitsubishi Eclipse Logo

291 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts


Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8514 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides