Question about 1997 Nissan Quest

1 Answer

Car the security remote from a 1997 nisson frontier be programed to work on a 1997 nission quest?

Posted by on

  • gilltpage May 03, 2010

    thank you about the remote fitting a nission quest from a frontier

  • gilltpage May 03, 2010

    yes the information helped and saved me some money i would like to keep talking to darklord

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,427 Answers

No sadly,, the frequencies and encryption keys / hex logs are different it wont work unless you plan on installing the same ecu / logic unit.. you cant reprogram the remote to work by itself..

Posted on May 03, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need know where expansion valve is on 2007 nission quest


Have you checked your system pressure? Are you sure that it is kicking out for high pressure? and not low pressure and just need a bit of charge? If it is kicking out on the high side for a clogged expansion valve you have to remember that an A/C system is a sealed system, if there is debris inside of the system and has clogged the expansion valve that there is only once place for it to come from and I would expect to be changing the compressor soon.

Jun 27, 2016 | 2007 Nissan Quest 3.5 Minivan

1 Answer

Firing order for a 1999 nisson quest van


Believe it or not the firing order is 1-2-3-4-5-6 The cylinder locations are 2-4-6 in front by radiator, and 1-3-5 against the firewall. If you have a misfire on a certain cyl. and you've replaced the plugs,wires and cap and rotor, you probably have a fuel injector that's dead or plugged,it's common on Quests. Figure out which cyl. is misfiring and unplug the fuel inj. conn. with the engine running and listen for a change in RPMs. If there is no change then replace the injector.

Aug 15, 2014 | Cars & Trucks

1 Answer

1997 nissan quest rear ac not working


i have 1997 nissan quest Ac and heat flow at front working but rear not work please tell me the problem

Jul 02, 2012 | 1998 Nissan Quest

1 Answer

2007 4x4 nisson Frontier King cab that jerks when you decelerate


I have a question for you... is it in D or 4 cause D is the overdive gear on the truck and it does it for me as well.... its normal for that truck if you have it in 4 you shouldnt expierence that problem but we love our gas mileage these days lol

Mar 23, 2009 | 2007 Nissan Frontier SE Crew Cab

1 Answer

My 93 nisson quest has no heat but is overheating


bad water pump or clogged system. is the car overheating, if so water pump. take off the radiator cap, then start your car, if you can see antifreeze swirling around, pump is ok, if it looks like it's standing still, waterpump. And a clogged system, might not be the only problem, it's just the more, common issues.

Feb 06, 2009 | 1993 Nissan Quest

1 Answer

Programing a remote on a 99 quest


first make sure,that the batter is ok. You will need to have both remotes while doing this.
1: get in and lock the doors with the power door lock
2: insert the key into the ignitoin repeatedly IN and OUT 6 times in a row or just keep doing so, until the hazard flashers flash on the dash board (observe the dash board while inserting key)
3: after the hazadrs flash TURN key into the ACC position/not start.(dash will light up) DO NOT START
4: with the key in ACC position, hit lock button on the remote. That will program that remote.
5: to program the other remote simply unlock the door with the door lock switch and relock it with the swithc and hit the other remote button.
6: done

Sep 16, 2008 | 1999 Nissan Quest

2 Answers

Programming nissan Quest Remote control


I have a used Nissan Quest 1999 that Remote Control does not work . How can I program it?

Jun 29, 2008 | 2004 Nissan Quest

Not finding what you are looking for?
1997 Nissan Quest Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...