Question about 2000 Suzuki Grand Vitara

2 Answers

How can I check the fuse of the water pump for the rear wiper. the wiper move but no water coming out!

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 267 Answers

There are two pumps on the bottle one for the front and the other for the back. most likely the pump stopped working or something got in it and blocked the water flow. the pumps are at the bottom of the bottle. check them out first. they will be the same so you could switch them and see what happens. good luck

Posted on May 03, 2010

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

Does that have a bottle in the trunk for the rear wiper? Some cars/suvs have two different washer bottles that one may be empty

Posted on May 03, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2010 Reg Ford Focus 5 door hatch rear screen wash not working. Front is OK. How do I fix it?


the washer fluid could be empty / the fuse for the wiper blew / the relay went bad /if you tried to use the wipers without clearing ice away you blew the fuse/ if you just put water in instead of washer fluid it's frozen/ if the wiper works and there is windshield fluid in the tank and not water and all fuses are good the pump motor for the fluid went and is easy to change

Feb 25, 2015 | Ford Cars & Trucks

1 Answer

Which fuse do I check for my rear wiper, 03, 1200cc polo


WIPER MOTOR FAULTY OR DAMAGED WIRING.IF U NEED MORE INFO LET ME KNOW

Feb 16, 2015 | Volkswagen Polo Cars & Trucks

2 Answers

2004 AUDI A4 WINDSHIELD WASHER DOEN'T PUMP WATER. THE MANUAL SAID THERE IS 1 FUSE FOR THE WIPER SYSTEM BUT WIPERS MOVE.


Just saw your post as I was having the same problem. The fuse that you need to look at is #37. I changed that fuse and everything was all good. Apparently the headlight washer pop-ups can freeze up in cold weather and blow the fuse.

Dec 19, 2010 | Audi A4 Cars & Trucks

1 Answer

Rear wiper blade on ml not moving - have changed


Check that the wiper arm hasn't come loose.
Tighten the nut under the cover.

Jun 11, 2010 | 2004 Mercedes-Benz Mercedes Benz M Class

1 Answer

Rear window wiper washer don't work fuses and


The switch may not be making contact or wire to switch may have come off. If poss check voltage on the water pump for your rear screen. You may also have a bad earth.

Dec 07, 2009 | 2002 Chevrolet Blazer

2 Answers

Volkswagen Golf - no water from rear windscreen wiper


***** whether this is a mechanical or an electrical problem.
Electrical:
Listen when you activate the switch from the wiper stalk if the motor (pump) is working. If it isn't then check your owners manual for the location of the fuse in the fuse box which will have a image of a wiper sweeping. Usually if you don't have electrical control over your wiper the washer is also affected. If the fuse is not blown then you'll have to look for a relay near the fuse box which would have 337, 389 or 192 on the top. When activating the switch you should feel the relay switching the same time with your hand. If it doesn't you might have a frozen or damaged relay and needs to be replaced.

Mechanical:
Once in a while the system gets clogged from the solution the placed in the reservoir. People sometimes mix dish washing liquid thinking it's going to work properly. Usually this is a mix of denatured alcohol and distilled water which softens the rubber of the wiper blades and cleans oily residue from the glass. Use a very thin guitar wire and poke the nozzle opening if there is any build up. If it still doesn't correct it you may have to use an air hose to blow through the line to clear it with build up.

Oct 16, 2009 | 1997 Volkswagen Golf

2 Answers

Horn plus rear windscreen wiper not working


i presume you mean wiper water pump... first locate the relays for the horn and rear wiper and replace them... usually found in the fuse panel under the dash... then fill up the rear water resevoir for the back wiper and try it again.

Robert

Jan 11, 2009 | 2000 Ford Focus

1 Answer

99 Nissan Quest real wiper runs continually when ignition is on


Principles of Operation
Operation of the windshield wiper and washer is controlled by the front wiper/washer amplifier assembly. The front wiper/washer amplifier input comes from the multifunction switch by means of a voltage divider circuit. A constant voltage is applied to the multifunction switch by the front wiper/washer amplifier. When the multifunction switch is moved into the LO, HI, or intermittent position, the voltage is directed through a series of resistors. This results in various voltages being returned to the module for each switch position. The module then grounds the appropriate circuit, based on the voltage signal received back from the multifunction switch. This causes the wipers to run intermittently, or at the appropriate speed. Voltage is supplied to the wiper motor by the CJB fuse F46 (20A).
When the multifunction switch wash button is depressed, it bypasses all of the resistors returning a full voltage signal to the module. The module then grounds the appropriate circuits to operate the windshield washer pump for as long as the switch is depressed. The windshield wiper speed is dependent on the position of the windshield wiper/washer switch.
Voltage for the windshield washer pump is also provided by CJB fuse F46 (20A).
Operation of the rear wiper and washer is controlled by the rear wiper/washer switch.
Voltage is supplied to the rear window wiper motor by the fuse junction panel fuse F44 (10A).
The rear window wiper motor ground is made or broken by the rear wiper/washer switch. When the rear wiper/washer switch is moved into the WIPER position, it grounds the rear window wiper motor circuit, causing the rear window wiper motor to run once every 10-15 seconds.
Voltage to the rear washer pump motor is also supplied by the CJB fuse F44 (10A). The rear washer pump is directly controlled by the rear wiper/washer switch which makes or breaks the ground for the washer pump motor, depending upon its position.
If the vehicle is equipped with a movable liftgate glass, a liftgate glass switch is utilized to prevent rear window wiper operation when the liftgate glass is open. This same switch also causes the rear window wiper to drop down approximately three inches when the liftgate glass latch is released.
------------------------------------------------------------------------------------------
  • The wipers stay on continuously — rear wiper
  • Circuit.
  • Rear wiper/washer switch.
  • GO to Pinpoint Test L .


---------------------------------------------------------------------------------------------
Measure the resistance between rear wiper/washer switch C288 pin 6, component side and rear wiper/washer switch C288 pin 2, component side.
  • Is the resistance less than 5 ohms with the switch depressed, and greater than 10,000 ohms with it released?
sxv~us~en~file=arrow.gif~gen~ref.gifYes GO to L2 .
sxv~us~en~file=arrow.gif~gen~ref.gifNo INSTALL a new rear wiper/washer switch. TEST the system for normal operation.

Measure the resistance between rear wiper/washer switch C288 pin 6, circuit WB08 (BU/YE), harness side and ground.
  • Is the resistance greater than 10,000 ohms?
sxv~us~en~file=arrow.gif~gen~ref.gifYes INSTALL a new rear wiper /washer switch. TEST the system for normal operation.
sxv~us~en~file=arrow.gif~gen~ref.gifNo REPAIR circuit WB08 (BU/YE). TEST the system for normal operation.

65501dd.gif 7e9d21a.gif

Dec 08, 2008 | 1999 Nissan Quest

2 Answers

Sprayer system doesn't work.


u washer pump motor went out i suggest taking it to a dealer
1 Inspect Fuse Corroded, burned, or shorted fuse may be interupting power source. grey_line.gif 2 Inspect Windshield Wiper Switch Faulty wiper switch or circuit. grey_line.gif 3 Inspect Wiper Motor Worn or faulty wiper motor.

Dec 04, 2008 | 2002 Audi A4

1 Answer

Window washer


well its most likely just your washer pump is broken and it should be located behind the rear fender lining by the front bumper on driver side

Jun 29, 2008 | 2002 Audi A8

Not finding what you are looking for?
2000 Suzuki Grand Vitara Logo

124 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Boyet Soriano
Boyet Soriano

Level 2 Expert

293 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...